• 한국연초학회지
• /
• 제23권1호
• /
• pp.90-93
• /
• 2001

In order to save hanging labor hours and reduce work intensity for bulk curing of the flue-cured tobacco, and electric hoist was developed. It consists of a pair of square steel frames with side plates and rolling casters to move back and forth on the second tire of bulk barn, and wire rope type lift was attached to the beneath of its top center. The lift driven by DC motor could be controlled by operating switch with one limit switch and control box, and a scissors shaped gripper was deviced to grip tobacco rack to the end of wire rope. As the results of experiments with electric hoist, labor hours for hanging could be saved by 30 to 40% as compared with those in conventional method. With simple and light structure, it was possible for even woman to load the harvested tobacco, and it could be recommended for farmers to use this device with reasonable price.

• ETRI Journal
• /
• 제8권3호
• /
• pp.89-96
• /
• 1986

TDX-1의 원격교환장치(RSS)는 본체의 가입자 rack을 원격지에서 동작될수 있도록 하기 위해 정합부분을 추가하여 개발한 것이다. 본체와 RSS간의 데이터링크는 본체의 T-bus와 RSS내의 T-bus를 가상 연결시켜 IPC통신을 수행할 수 있도록 하는 기능이다.

• 한국환경성돌연변이발암원학회지
• /
• 제26권2호
• /
• pp.35-40
• /
• 2006

Background: Inorganic arsenic is a human carcinogen that can target the liver, but its carcinogenic mechanisms are still unknown. Inorganic arsenic induces a spectrum of tumors including hepatocellular carcinoma in mice. Methods: Pregnant C3H mice were supplied with drinking water containing 50 ppm sodium arsenite during their pregnancy. The protein expression profile in the liver of 0.5-day-old. male offsprings exposed transplacentally to sodium arsenite was analyzed using protein 2D gel electrophoresis followed by mass spectrometry (MALDI-TOF). Results: Expression of proteins such as hydroxymethylglutaryl-CoA synthase mitochondrial precursor (HMG-CoA synthase), ${\beta}$-actin (cytoplasmic 1) and apolipoprotein A-IV precursor (Apo-AIV) were induced in mouse liver by sodium arsenite, while uricase (urate oxidase), guanine nucleotidebinding protein beta subunit 2-like 1 (RACK1) and fructose-bisphosphate aldolase B (Aldolase 2) were down-regulated. Summary: Expression of proteins that have been implicated in carcinogenesis, such as HMG-CoA, ${\beta}$-actin, and RACK1, was regulated in the liver of mice transplacentally exposed to inorganic arsenic.

• Steel and Composite Structures
• /
• 제52권1호
• /
• pp.1-14
• /
• 2024

This paper introduces a system allows for seismic isolation of the pallet from the rack in the down-aisle direction, occupies minimal vertical space (5 cm) and ±7.5 cm of deformation range. A conceptual model of the isolation system is presented, leading to a constitutive equation governing its behavior. A first experimental campaign studying the response of the isolation system's components was conducted to calibrate the parameters of its constitutive equation. A second experimental campaign evaluated the response of the isolation system with mass placed on it, subjected to cyclic loading. The results of this second campaign were compared with the numerical predictions using the pre-calibrated constitutive equation, allowing a double-blind validation of the constitutive equation of the isolation system. Finally, a numerical evaluation of the isolation system subjected to a synthetic earthquake of one component. This evaluation allowed verifying attributes of the proposed isolation system, such as its self-centering capacity and its effectiveness in reducing the absolute acceleration of the isolated mass and the shear load transmitted to the supporting beams of the rack.

• 한국전산유체공학회지
• /
• 제19권3호
• /
• pp.24-28
• /
• 2014

With ever rising concerns about saving of fossil fuel resource, there have been an increasing demand for use of energy more efficiently. The electric motor driven inverters can be a great help to improve energy efficiency. They are also used to control the motor speed to the actual need. Therefore the use of them can lead to reduce energy consumption. In particular, the medium voltage(MV) drive systems used for pumps, fans, steel rolling mills and tractions have widespread applications in the industry. They cover power ratings from 0.4MW to 40MW at the MV level of 2.3kV to 13.8kV. The majority of the installed MV drive systems however, are in the 1MW to 4MW range with voltage rating from 3.3kV to 6.6kV. But they are required to reduce size and weight like other power electronic equipments. In this paper, we studied on the 3.3kV(105A) compact rack type inverter system for improving the cooling efficiency. At first, we confirmed the tendency of temperature with computational simulation using ANSYS ICEPAK and actual experimental tests. And then we researched thermal performance improvement designs in order to reduce temperature of the transformer for the safe operation. It can reduce temperature of transformer that using pipe type flow guide in the system. As a result, we found out more efficient solution by thermal-fluid analysis.

• 한국화재소방학회논문지
• /
• 제30권2호
• /
• pp.98-105
• /
• 2016

물류창고 화재위험성은 보관물품, 포장재 및 파렛 등의 가연성과 화재하중 그리고 창고 내부 천장높이, 랙크 등의 저장높이와 배치, 통로 폭 등에 따라 결정된다. 물류창고의 소화 또는 진압대책은 이러한 주요 인자를 고려한 가연물 등급 분류기준을 마련하고 스프링클러설비 설계기준을 적용해야 한다. 본 연구는 국내 물류창고의 자동식스프링클러 적용을 위한 첫 단계로서 경기도 소재 5개 물류단지 내 28개 창고 동을 대상으로 수용물품의 분포 및 창고 공간특성을 현장 조사하였다. 아울러 미국 유럽 및 일본의 물품 분류기준을 분석하였으며 이를 통하여 물류창고 수용물품의 등급분류기준 마련을 위한 기초자료를 제시하고자 한다.

• 한국재난정보학회 논문집
• /
• 제15권1호
• /
• pp.67-75
• /
• 2019

연구목적: 본 연구는 국내 적층형 창고건물의 소방대응력 강화를 위한 제도적 개선방안을 제시함을 목적으로 한다. 연구방법:경기도 소재 창고 화재사례 및 설계사례를 분석하고 11명의 현장대응 소방전문가 집단인터뷰를 수행하였다. 연구결과: 초기소화용 이동식 장비마련, 3면 이상 접근성확보, 내부진입창 설치, 옥외소화설비의 적정배치, 현장정보의 이미지처리, 현장지휘관 인센티브 강화 등을 통한 소방활동 개선방안이 필요하다. 결론: 창고의 규모별 구조별 화재특성 및 위험요인을 고려하여 출동단계 및 현장대응단계별로 효율적인 표준작전절차 및 안전기준을 수립 적용되어야 한다.

• 한국임상수의학회지
• /
• 제6권1호
• /
• pp.217-225
• /
• 1989

In order to develop the effective methods of electroacupuncture anesthesia to bovine species. eight animals of Korean native cow, which are healthy and have ordinary perception response. were examined to study on the acupuncture prescription. In the present study, six kinds of acupuncture prescription methods were applied with four kinds of meridian points which consist of Sam Yang Rack, Keuk Moon, Boo Yang and Sam Eum Kyo. The results are summarized as follows. 1. All kinds of methods applied here were simple in needling technique but considerably effective on analgesia. It was also confirmed that the methods could be applied to the all clinical signs, because these were not depended to vary on the position of operation area and the body restrain. 2. The results, which were obtained by applying to all meridian points at both legs selected by diagonal lines(e. g., right foreleg and left hind leg, and vice versa) and to all meridian points at the all legs, were revealed the same analgesia effect. However, the result applied to meridian points at one side of body did not show the good effect for analgesia. 3. When the acupuncture prescription was applied to Sam Yang Rack and Keuk Moon at both forelegs, and Boo Yang and Sam Eum Kyo at both hind-legs, the good effects of regional analgesia appeared at the anterior body and both forelegs, and the posterior body and both hind-legs, respectivery. 4. There was no sognificant difference in changing biochemical pictures of blood and serum during the experiment.

• 한국정밀공학회지
• /
• 제34권1호
• /
• pp.47-51
• /
• 2017

Generally, a working excavator has only one directional bucket tilting angle, which is up-forward. However, side direction rotation of the bucket would allow variety of working output. We designed a hydraulic rotary actuator comprising a double rod hydraulic cylinder with a rack-pinion gear set for use in excavator bucket with side tilting mechanism, thus converting the linear to angular motion. The proposed side tilting rotary actuator was designed with parts suitable for medium size of heavy duty excavator. These mechanical parts were inexpensive to purchase and the manufacturing cost was reasonable. The proposed mechanism is potentially useful for excavator with variety of working output.

• Journal of Information Technology Applications and Management
• /
• 제18권1호
• /
• pp.125-141
• /
• 2011

As the sales volume of online shops increases, the job burden in the back-offices of the online shops also increases. Order picking is the most labor-intensive operation among the jobs in a back-office and mid-size pure click online shops are experiencing the time delay and complexity in order picking nowadays while fulfilling their customers' orders. Those warehouses of the mid-size shops are based on manual systems, and as order pickings are repeated, the warehouses get a mess and lots of products in those warehouses are getting missing, which results in severe delay in order picking. To overcome this kind of problem in online clothing shops, we research a methodology to locate warehousing products. When products arrive at a warehouse, they are packed into a box and located on a rack in the warehouse. At this point, the operator should determine the box to be put in and the location on the rack for the box to be put on. This problem could be formulated as an Integer Programming model, but the branch-and bound algorithm to solve the IP model requires enormous computation, and sometimes it is even impossible to get a solution in a proper time. So, we relaxed the problem, developed a set of heuristics as a methodology to get a semi-optimum in an acceptable time, and proved by an experiment that the solutions by our methodology are satisfactory and acceptable by field managers.