• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.6
• /
• pp.27-33
• /
• 2008

Given a polynomial ${\hbar}(x){\in}F_q[x]$ of degree h, it is an important problem to determine the size of multiplicative subgroup of $\(F_q[x]/({\hbar(x))\)*$ generated by $x-s_1,\;x-s_2,\;{\cdots},\;x-s_n$, where $\{s_1,\;s_2,\;{\cdots},\;s_n\}{\sebseteq}F_q$, and for all ${\hbar}(x){\neq}0$. So far the best known asymptotic lower bound is $(rh)^{O(1)}\(2er+O(\frac{1}{r})\)^h$, where $r=\frac{n}{h}$ and e(=2.718...) is the base of natural logarithm. In this paper, we exploit the coding theory connection of this problem and prove a better lower bound $(rh)^{O(1)}\(2er+{\frac{e}{2}}{\log}r-{\frac{e}{2}}{\log}{\frac{e}{2}}+O{(\frac{{\log}^2r}{r})}\)^h$, where log stands for natural logarithm We also discuss about the limitation of this approach.

• Korean Journal of Materials Research
• /
• v.18 no.4
• /
• pp.193-198
• /
• 2008

$WO_3$-doped $SnO_2$ thin films were prepared in a solution-deposition method and their gas-sensing characteristics were investigated. The doping of $WO_3$ to $SnO_2$ increased the response ($R_a/R_g,\;R_a$: resistance in air, $R_g$: resistance in gas) to $H_2$ substantially. Moreover, the $R_a/R_g$ value of 10 ppm CO increased to 5.65, whereas that of $NO_2$ did not change by a significant amount. The enhanced response to $H_2$ and the selective detection of CO in the presence of $NO_2$ were explained in relation to the change in the surface reaction by the addition of $WO_3$. The $WO_3$-doped $SnO_2$ sensor can be used with the application of a $H_2$ sensor for vehicles that utilize fuel cells and as an air quality sensor to detect CO-containing exhaust gases emitted from gasoline engines.

• Journal of the Korean Vacuum Society
• /
• v.5 no.3
• /
• pp.245-250
• /
• 1996

$Y_2O_3$ thin film on si(100) was successfully grown by ionized cluster beam(ICBD) technique at substrate temperature of around $500^{\circ}C$ and pressure of ~$10^{-5}$Torr.To prevent the oxidation of Si substrae, a very thin yttrium layer was deposited on Si before reactive depositing of oxygen and yttrium source. In asdeposited stage, b.c.c and h.c.p strucutres of $Y_2O_3$ were observed from S-ary analysis. From the observation of spots and ring patterns in selected area diffractin(SAD) patterns. crystallane formation and growth could be proceeded during the deposition. $Y_2O_3$/mixed layer/$SiO_2=170\AA/50\AA/10\AA$ structure were verified by high resolution transmition electron imcroscopy(HRTEM) image, and the formation of amorphous layer of SiO2 was discussed . Electricla charateristics of the film were also investigated . In as-deposited Pt/$Y_2O_3$/Si sturcuture, leakage current was less than $10^{-6}$A/$\textrm{cm}^2$ at 7MV/cm strength.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1057-1059
• /
• 2008

Study of the ion-induced-, photo- and exo-electron emission from a Sc doped MgO protective layer has been performed. It is established that doping with Sc increases photo- and especially exo-electron emission from MgO films while the ion-induced electron emission coefficient $\gamma$ stays unchanged.

• Journal of Korean Neurosurgical Society
• /
• v.29 no.9
• /
• pp.1209-1214
• /
• 2000

Objectives : The measurement of resistance to cerebrospinal fluid outflow($R_o$) can clearly delineate cerebrospinal fluid dynamics in patients with ventricular dilatation and can help in selecting patients to undergo shunt placement. With regards to type of infusion method, bolus injection is known to be more practical and safer than continuous infusion. The purpose of this study was to obtain $R_o$ of normal adults using lumbar bolus injection method. Material and Methods : Twenty adults aged 25 to 52 years were studied using lumbar bolus injection method. Fifteen patients with hemifacial spasm and five with cerebral concussion underwent $R_o$ measurement under propofol general anesthesia and local anesthesia, respectively. Results : The mean values of $R_o$ determined 1 minute and 2 minutes after bolus injection were $4.8{\pm}1.7$ and $4.4{\pm}1.6mmHg/ml/min$, respectively. There was no significant difference of $R_o$ between propofol general anesthesia group and local anesthesia group. Two patients showed $R_o$ greater than 6mmHg/ml/min. One patient revealed unexpectedly high level of $R_o$ due to severe spinal stenosis. Conclusion : Mean Ro in this study was higher than that of Shapiro's study. Borderline Ro near 6mmHg/ml/min should be regarded with caution and compared with clinical symptoms and results of other studies. Patients with severe spinal stenosis should be evaluated with caution.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.4
• /
• pp.432-436
• /
• 1999

Fiber growth of $Al_{2}O_{3}/R-Al-O$ (R = Y, Gd, Dy, Ho, Er) eutectic by the micro-pulling down method is described. The thermal stability and strength at elevated temperature of each materials is evaluated in relation to the microstructure.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2004.05a
• /
• pp.94-97
• /
• 2004

Micro/nano-sized L $a_{0.6}$S $r_{0.4}$Co $O_{3-}$$\delta$/ particles are considered to improve oxygen permeability in highly selective inorganic oxygen separation membrane. A L $a_{0.7}$S $r_{0.3}$G $a_{0.6}$F $e_{0.4}$ $O_{3-}$$\delta$/ membrane with perovskite structure is fabricated by a conventional solid-state reaction. As the oxygen permeation flux of the L $a_{0.7}$S $r_{0.3}$G $a_{0.6}$F $e_{0.4}$ $O_{3-}$$\delta$/ membrane was lower than commercial gas separation membranes, we coated the L $a_{0.6}$S $r_{0.4}$Co $O_{3-}$$\delta$/ particles to enhance the oxygen permeation flux. It has been demonstrated that the effective area of reactive free surface is an important factor in determining the effectiveness of the introduction of coating layer for oxygen permeation. The introduction of micro/nano L $a_{0.6}$S $r_{0.4}$Co $O_{3-}$$\delta$/ particles was very effective for increasing oxygen flux, as the flux was as much as 2 to 6 times higher than that of an uncoated L $a_{0.7}$S $r_{0.3}$G $a_{0.6}$F $e_{0.4}$ $O_{3-}$$\delta$/ membrane.\delta$/ membrane.>/ membrane.brane.

• Journal of computational fluids engineering
• /
• v.13 no.4
• /
• pp.80-85
• /
• 2008

The prediction of the separation trajectories of external stores released from a military aircraft is an important task in the aircraft design area having the objective to define the operational and release envelopes. This paper presents the results obtained for store separation by employing commercial softwares, FLUENT and CFD-FASTRAN. FLUENT treats the rigid body motion by employing a remeshing scheme. CFD-FASTRAN uses Chimera(overset) grid and interpolations. It was found that, for the prediction of the trajectories and behavior of the stores separated from the wing, both codes show the good agreement with the experimental results.

• Applied Microscopy
• /
• v.46 no.1
• /
• pp.37-44
• /
• 2016

In this study $TiO_2$/reduced graphene oxide ($TiO_2/rGO$) bipyramid with tunable nanostructure was fabricated by two-step solvothermal process and subsequent heat-treatment in air. The as-synthesized anatase $TiO_2$ nanocrystals possessed morphological bipyramid with exposed dominantly by (101) facets. Polyethylenimine was utilized during the combination of $TiO_2$ and graphene oxide (GO) to tune the surface charge, hindering the restack of graphene during solvothermal process and resulting in 1 to 5 layers of rGO wrapped on $TiO_2$ surface. After a further calcination, a portion of carbon quantum dots (CQDs) with a diameter about 2 nm were produced owing to the oxidizing and cutting of rGO on $TiO_2$. The as-prepared $TiO_2/rGO$ hybrid showed a highly photocatalytic activity, which is about 3.2 and 7.7 times enhancement for photodegradation of methyl orange with compared to pure $TiO_2$ and P25, respectively. We assume that the improvement of photocatalysis is attributed to the chemical bonding between rGO/CQDs and $TiO_2$ that accelerates photogenerated electron-hole pair separation, as well as enhances light harvest.

• Progress in Superconductivity and Cryogenics
• /
• v.9 no.1
• /
• pp.18-21
• /
• 2007

Highly textured MgO template by ion-beam-assisted deposition(IBAD) was successfully fabricated using a continuous reel-to-reel(R2R) mode. To enlarge the deposition area, the previous IBAD system was modified into the system with 14-pass and five heating zone. Every processing step was carried out using this multi-turn IBAD system. The overall process consists of R2R electropolishing of a hastelloy C276 tape, deposition of $Al_2O_3$ diffusion barrier, $Y_2O_3$ seed layer, IBAD-MgO and homoepi-MgO layer. The IBAD-MgO templates were fabricated using the IBAD system with 216 cm-length deposition zone and 32 cm diameter ion source. The texture of MgO films developed during the IBAD process was monitored by in-situ reflection high energy electron diffraction(RHEED) to optimize the IBAD process. Recently, 100 m long IBAD-MgO tape with in-plane texture of $\Delta{\phi}<10^{\circ}$ was successfully fabricated using the modified IBAD system. In this report, the detailed deposition condition of getting a long length IBAD-MgO template with a good epitaxy is described.