• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.64-67
• /
• 2006

Drop-in tests were conducted using R290/R32 (31:69) or R290/DME (65:35) mixture in a ice-cream maker for possible replacement of R-502 and R-404A. At the standard room temperature ($20^{\circ}C$), the time required for initial ice-cream making was 4'7' for R290/32, 4'39' for R404A and 4'59' for R290/DME. The electric energy consumed was 436 kJ for R290/32, 425 kJ for R404A and 439 kJ for R290/DME. The mass flow rate as well as the temperature and pressure data are also provided.

• 충청수학회지
• /
• 제32권3호
• /
• pp.349-363
• /
• 2019

Let ${\mathbb{H}}^5$ be the 5-dimensional Heisenberg group equipped with a left-invariant metric. In this paper we calculate the volumes of geodesic balls in ${\mathbb{H}}^5$. Let $B_e(R)$ be the geodesic ball with center e (the identity of ${\mathbb{H}}^5$) and radius R in ${\mathbb{H}}^5$. Then, the volume of $B_e(R)$ is given by $${\hfill{12}}Vol(B_e(R))\\{={\frac{4{\pi}^2}{6!}}{\left(p_1(R)+p_4(R){\sin}\;R+p_5(R){\cos}\;R+p_6(R){\displaystyle\smashmargin{2}{\int\nolimits_0}^R}{\frac{{\sin}\;t}{t}}dt\right.}\\{\left.{\hfill{65}}{+q_4(R){\sin}(2R)+q_5(R){\cos}(2R)+q_6(R){\displaystyle\smashmargin{2}{\int\nolimits_0}^{2R}}{\frac{{\sin}\;t}{t}}dt}\right)}$$ where $p_n$ and $q_n$ are polynomials with degree n.

• 구강회복응용과학지
• /
• 제16권3호
• /
• pp.197-210
• /
• 2000

Surface roughness is one of implant surface topography and it's found that surface roughness characterizations, such as surface energy, oxide layer thickness and its chemical composition, are closely correlated if the roughness is changed. Several studies showed the importance of analyzing surface structure so the surface structure of thread implant was analyzed to measure the implant quality exactly. In this study, surface roughness of 4 implants - MK $II^{(R)}$(Nobel Biocare), $RBM^{(R)}$(Life-Core, USA), $Osseotite^{(R)}$(3i, USA), $TPS^{(R)}$(Life-Core, USA) - were measured using $Accura^{(R)}$ and 40 implants were installed into 4 sets of ten bovine ribs based on the parameters from the measurements. From this test, the following conclusions for the initial stability were drawn by measuring and comparing RFA, Periotest Value (PTV), Removal Torgue Value (RTV). 1. $R_a$ value in surface roughness measurement was increasing by the order of $MKII^{(R)}$, $Osseotite^{(R)}$, $RBM^{(R)}$, $TPS^{(R)}$ and $R_q$ value was the same order. 2. $R_q$ value in each section was observed to increase by the order of $MKII^{(R)}$, $Osseotite^{(R)}$, $RBM^{(R)}$, $TPS^{(R)}$ in top and $MKII^{(R)}$, $RBM^{(R)}$, $Osseotite^{(R)}$, $TPS^{(R)}$ in mid-section but the value of $MKII^{(R)}$ bottom was the lowest, followed by $Osseotite^{(R)}$, $RBM^{(R)}$ and $TPS^{(R)}$. 3. RFA increased by the order of $RBM^{(R)}$(7042Hz), $MKII^{(R)}$(7047Hz), $Osseotite^{(R)}$(7076Hz), $TPS^{(R)}$(7168Hz) and there was no significance between each group. 4. PTV was increasing by the order of $MKII^{(R)}$(-1.62), $TPS^{(R)}$(-1.92), $Osseotite^{(R)}$ & $RBM^{(R)}$(-2.08) and there was no significance, either. 5. Removal torque in RTV measurement showed the increasing order of $MKII^{(R)}(5.31kgf{\cdot}cm)$, $Oeeotite^{(R)}(5.71kgf{\cdot}cm)$, $TPS^{(R)}(5.92kgf{\cdot}cm)$ and $RBM^{(R)}(7.24kgf{\cdot}cm)$ and there was no significance among groups. Above observations explains that surface roughness does not make any impact on the initial stability of implants installation.

• 벤처창업연구
• /
• 제10권3호
• /
• pp.75-83
• /
• 2015

본 연구에서는 중소기업 기술혁신개발사업에 참여한 중소기업 211개 기업을 대상으로 기업과 정부의 R&D투자, 정부R&D지원사업 참여경험이 기업의 고용증가율에 어떠한 영향을 미치는지를 실증적으로 분석하였다. 또한 기업의 R&D투자와 고용증가율간의 관계에서 정부 R&D투자규모와 정부R&D지원사업 참여경험이 조절역할을 하는지도 함께 분석하였다. 분석결과 기업의 R&D투자와 정부R&D투자규모는 고용증가율에 유의미한 영향을 미쳤으며 정부R&D투자는 기업의 R&D투자와 고용증가율간의 관계에서 조절효과를 나타냈다. 기업의 R&D 투자규모가 큰 기업과 작은 기업으로 나누어 정부R&D투자와 고용증가율간의 관계를 분석한 결과 기업의 R&D투자규모가 큰 기업군에서 정부R&D투자가 고용증가율에 유의미한 영향을 미치는 것으로 나타났다. 본 연구결과를 종합하면 중소기업에 대한 정부R&D투자는 고용창출효과를 나타내며 특히 혁신역량이 높은 중소기업에 대한 정부R&D투자가 고용창출에 대한 효과적인 역할을 한다고 설명할 수 있다. 그러므로 정부는 중소기업의 혁신역량에 따라 차별화된 R&D투자 전략을 통해 고용효과를 극대화할 수 있을 것이다.

• 산업경영시스템학회지
• /
• 제20권44호
• /
• pp.129-134
• /
• 1997

The purpose of this study is to estimate the distribution rate of R&D input on R&D output in major manufacturing industrial sector. The distribution rate is estimated on time-series data for the period 1980 to 1996. The data used in this study can be divided into the two categories. 1) R&D output data (Patent, Utility) 2) R&D input data (R&D expenditure, R&D workers) The raw data of R&D expenditure is transformed into R&D stock. And the specific production function is used to represent the interaction between R&D input and output. The production function shows the maximum rate of R&D output that can be achieved by certain given, technologically possible, R&D input combinations. The main findings can be summarized as follows. 1) There was a diminishing return between R&D input and output$(\alpha+\beta<1). 2) R&D output growth was more affected by R&D expenditures than R&D workers. 3) R&D workers were more contributed highly to Patent granted than Utility model.

• Bulletin of the Korean Chemical Society
• /
• 제26권2호
• /
• pp.233-237
• /
• 2005

Cyclopentadiene compounds, 2-[CR'R(OMe)]-1,3-Me$_2C_5H_3$ (R, R' = 2,2'-biphenyl, 2) and 2-[CR'R(OSiMe$_3$)]-1,3-Me$_2C_5H_3$ (R, R' = 2,2'-biphenyl, 3; R = ph, R' = ph, 4; R = 2-naphthyl, R' = H, 5) are readily synthesized from 2-bromo-3-methoxy-1,3-dimethylcyclopentene (1). Reaction of the cyclopentadienes with Ti(NMe$_2$)$_4$ in toluene results in clean formation of the cyclopentadienyl tris(dimethylamido)titanium complexes, which are transformed to the trichloride complexes, 2-[CR'R(OMe)]-1,3-Me$_2C_5H_2$}TiCl$_3$ (R, R' = 2,2'-biphenyl, 6) and {2-[CR'R(OSiMe$_3$)]-1,3-Me$_2C_5H_2$}TiCl$_3$ (R, R' = 2,2'-biphenyl, 7; R = ph, R' = ph, 8; R = 2-naphthyl, R' = H, 9). Attempts to form C1-bridged Cp/oxido complexes by elimination of MeCl or Me$_3$SiCl were not successful. X-ray structures of 6, 7 and an intermediate complex {2-[Ph$_2$C(OSiMe$_3$)]-1,3-Me$_2C_5H_2$}TiCl$_2$(NMe$_2$) (10) were determined.

• 벤처창업연구
• /
• 제5권3호
• /
• pp.1-25
• /
• 2010

최근 국가 R&D에 투입되는 예산이 증가하고 있음에도 불구하고 국가 또는 산업 전반에 큰 파급력을 가지는 괄목할만한 성과의 창출은 이루어지지 않고 있다. 그 이유 중 하나는 국가 R&D 프로젝트의 계획단계가 효과적으로 이루어지고 있지 않기 때문이다. 따라서 본 연구에서는 국가 대규모 R&D 사업단의 사례 연구, 해외 국가 R&D 관리 동향과 주요 R&D 관리 기법들에 대한 분석을 통해 국가 R&D 기획을 강화시키기 위한 제언을 제시하였다. 본 연구 결과는 국가 R&D 계획 체계를 개선하는 데 있어 중요한 정책적 시사점을 제공할 것으로 기대된다.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제11권4호
• /
• pp.188-198
• /
• 2003

R410A and R407C are considered to be alternative refrigerants of R22 for the air-conditioners. An experimental study is carried out to investigate the effect of the change of mass flow rate on the characteristics of heat transfer and pressure drop in three row slit finned-tube heat exchanger for R407C, R410A and R22. R407C, a non-azeotropic refrigerant mixture, exhibited a quite different condensation phenomenon from those of R22 and R410A and its condensation heat transfer coefficient was much lower than that of R22 and R410A. On the other hand, the condensation heat transfer coefficient of R410A, near-azeotropic refrigerant mixture, was a little higher than that of R22. R410A also showed the lowest condensation pressure drop across the test section. For all refrigerants, the condensation heat transfer coefficient and pressure drop increase as the mass flux increases. The condensation heat transfer coefficient correlation proposed by Kedzierski shows the best agreement with the experimental data within $\pm$20%.

• 지식경영연구
• /
• 제13권1호
• /
• pp.25-39
• /
• 2012

According to knowledge-based view, knowledge is an essential strategic resource for a firm to retain sustainable competitive advantage. As knowledge is created and disseminated throughout the firm, the firm can enhance its capability to respond to new and unusual situations. Thus, a lot of companies actively manage their knowledge and intellectual capital. Especially, knowledge management (KM) activities in R&D organizations play a critical role in enhancing R&D performances such as innovation capability. In this regard, this study develops a theoretical model to examine the effects of R&D KM activities on R&D performance. The research model posits KM participation, knowledge management system (KMS) use, and community of practice (CoP) as the main activities of R&D KM. This study proposes that R&D shared knowledge quality and R&D KM satisfaction play a mediating role between R&D KM activities and its performance. The proposed research model was tested by using survey data collected from 248 employees in an R&D department. PLS (partial least squares) was employed for the analysis of the data. The findings of this study showed that R&D KM activities play a significant role in enhancing R&D performance. The findings revealed that R&D shared knowledge quality is not significantly related to R&D performance, while R&D KM satisfaction significantly influences R&D performance. The theoretical and practical implications of the findings were described.

• 대한수학회보
• /
• 제42권1호
• /
• pp.165-167
• /
• 2005

Let M = (R, +, $\cdot$, <, ... ) be an o-minimal expansion of the standard structure R = (R, +, $\cdot$, >) of the field of real numbers. We prove that if 2 $\le$ r < $\infty$, then every n-dimensional definable $C^r$ manifold is definably $C^r$ imbeddable into $R^{2n+l}$. Moreover we prove that if 1 < s < r < $\infty$, then every definable $C^s$ manifold admits a unique definable $C^r$ manifold structure up to definable $C^r$ diffeomorphism.