• 한국응용약물학회:학술대회논문집
• /
• 한국응용약물학회 2008년도 Proceedings of the Convention
• /
• pp.5-20
• /
• 2008

GLP 1 기반의 약(GLP-1 유도체와 DPP IV 저해제)과 인크레틴 유사체는 최근 가장 각광을 받는 2당뇨 치료제 계열 중 하나이다. GLP-1은 위장에서 분비되는 핍타이드 인크레틴 호르몬으로서 췌장으로부터의 당-의존적 인슐린 분비를 증진하고, 위장통과를 지연시키며, 췌장 베타세포의 증식을 촉진한다. DPP IV 저해제는 GLP-1 불활성화시키는 DPP IV 효소의 활성을 저해함으로써 인크레틴처럼 작용한다. LC15-0133은 경쟁적, 가역적 DPP IV 저해제 ($IC_{50}$ = 24 nM, Ki=0.247 nM)이며, DPP II, DPP 8, 엘라스타제, 트릴신, 유로키나제에 비해 DPPIV 에 대한 선택적 억제 효능이 우수하다. LC15-0133 랫과 개에서 긴 반감기와, 우수한 경구흡수율을 보였다. LC15-0133 랫과 개에서 각각 0.1 mg/kg 0.02 mg/kg 용량으로 경구투여하고 24시간이 지난 후에도 50%이상의 혈장 DPP IV 활성 억제효능을 유지하였다. C57BL/6 마우스에서 LC15-013301 경구당부하에 의한 혈당증가를 억제하는 최소유효용량은 0.01 mg/kg, 당에 의한 GLP-1 분비를 증가시키는 최소유효용량은 0.1 mg/kg 이다. Zucker 당뇨 랫에서 LC15-01331의 1개월간의 경구반복투여는 당뇨병으로의 진행을 지연시키고, 혈중 HbA1c 감소시켰다. 결론적으로, LC15-0133은 신규의 강력하고, 선택적인 경구 DPP IV 저해제이며, 여러가지 동물모델에서 탁월한 혈당강하효능을 보였다.

• 한국잡초학회지
• /
• 제14권1호
• /
• pp.34-41
• /
• 1994

생물검정 결과 수수에 함유된 타감물질의 억제 효과는 공시 식물, 사용부위 및 사용 농도에 따라 다르게 나타났다. 공시 작물 및 잡초 모두가 줄기에서 추출한 물질에 의해 발아 및 생장이 억제되었는데 작물은 무우, 밀, 벼 순으로 억제효과가 있었으며 옥수수에서 억제효과가 가장 적었다. 잡초는 Ipomoea, triloba에서 가장 억제효과가 나타났으며 그 다음이 Echinochloa colona, Rottboellia cochinchinensis 순으로 나타났다. 수수의 부위별로 타감물질의 억제정도를 조사한 결과 E. colona에서는 줄기 부위에서 가장 크게 나타났는데 7.5%(w/v) 에서 E. colona의 생육이 완전히 억제되었으나 잎, 뿌리는 억제효과가 크지 않았다. 무우에서는 줄기, 잎, 뿌리 모두가 비슷하게 억제 작용을 나타냈으며 5%에서 무우의 생육이 완전히 억제되었다. 온실에서 수수 줄기를 이용해서 mulching 실험을 한 결과 줄기의 타감물질이 E. colona와 무우에 상당한 억제효과가 있다는 것이 확인이 되었다.

• 한국산업보건학회지
• /
• 제24권3호
• /
• pp.310-320
• /
• 2014

Backgrounds: Endotoxin, which found in the outer membrane of the gram-negative bacteria cell wall, makes up almost all of the lipopolysaccharide(LPS). When people are exposed to endotoxin,it can result in diverse health effects such as an airway irritation and inflammation, fever, malaise, bronchitis, allergic asthma, toxic pneumonitis, hypersensitivity lung disease. Cases among the elderly, children or pregnant can occur more frequently than a healthy adult if they are repeatedly exposed to the existing endotoxin. Therefore, we investigated and assessed the environmental characteristics associated with the airborne endotoxin concentration level in six hospital lobbies. Method: Endotoxin from indoor air in six hospital lobbies was measured by an area sampling method and analyzed according to American Society for Testing and Materials International(ASTM international) E2144-01. Total suspended particulate(TSP), carbon dioxide($CO_2$), temperature and humidity were also measured by using direct reading measurements or airborne sampling equipment at the same time. Environmental characteristics were appropriately divided into two or three groups for a statistics analysis. One-way analysis variable(one-way ANOVA) was used to examine a difference of the endotoxin concentration, depending on the environmental characteristics. In addition, only variables with p-value(p<0.25) were eventually designed to the best model by using multiple regression analysis. Results: The correlation analysis result indicated that TSP(p=0.003) and $CO_2$(p<0.0001) levels were significantly associated with endotoxin concentration levels. In contrast, temperature(p<0.068) and humidity(p<0.365) were not associated with endotoxin concentration. Levels of endotoxin concentration were statistically different among the environmental characteristics of Service time(p=0.01), Establishment of hospital(p<0.001), Scale of hospital(p=0.01), Day average people using hospital(p=0.03), Cleaning time of lobby(p=0.05), Season(p<0.001), and Cleaning of ventilation system(p<0.001) according to ANOVA. Finally, the best model(Adjusted R-square=72%) that we designed through a multiple regression test included environmental characteristics related to Service time, Area of lobby, Season, Cleaning of ventilation system, and Temperature. Conclusions: According to this study, our result showed a normal level of endotoxin concentration in the hospital lobbies and found environmental management methods to reduce the level of endotoxin concentration to a minimum. Consequently, this study recognized to be requirement for the management of ventilation systems and an indoor temperature in order to reduce the level of endotoxin concentration in the hospital lobbies.

• 토지주택연구
• /
• 제3권4호
• /
• pp.433-449
• /
• 2012

횡력을 받는 넓은 보와 기둥 내부접합부의 거동을 평가하기 위하여 넓은 보-기둥 접합부의 휨강성비와 유효폭 및 슬래브 유무를 변수로 6개의 1/2축소 모델 실험체를 제작하여 구조성능 평가를 수행하여 하중-변형, 연성, 강성 등을 평가하였다. 동 모델을 대상으로 비탄성해석을 수행하여 구조성능평가 결과와 비교하였다. 연구결과 도출된 결론은 다음과 같다. 넓은 보-기둥 내부 접합부는 중진지역인 국내에서 적용하고 있는 부분골조형 구조에 적용이 가능한 것으로 판단된다. 슬래브의 강성이 횡력을 받는 넓은 보-기둥 내부 접합부의 거동에 영향을 미치는 것으로 나타났다. 휨강성비가 2.0이상의 경우 T형보의 플랜지로서 슬래브 유효폭은 넓은 보 유효깊이의 2.0d로 평가되며, 휨강성비가 1.4~2.0일 경우, 슬래브 유효폭의 영향은 고려하지 않아도 되는 것으로 나타났다.

• 한국산업보건학회지
• /
• 제29권4호
• /
• pp.464-476
• /
• 2019

Objectives: This study aimed to assess the exposure levels of tollbooth workers to diesel particulate matter using black carbon (BC) and to find the correlations among variables associated with BC using the motor vehicle management act regulated by the Ministry of Land, Infrastructure and Transport. Methods: This study was performed over 14 days at a university in Seoul. BC levels were monitored using an aethalometer and were conducted around the breathing zones of the workers. There were three sampling locations: inside the tollbooth (front gate and rear gate) and an office as a control group. T-test, correlation, and multiple linear regression analysis were performed using SPSS. Results: The geometric mean (GM) of BC_30min concentrations in the exposure group was 2.44 ㎍/㎥, approximately 1.4 times higher than the control group (1.75 ㎍/㎥). The GM of BC_30min concentrations was 2.75 ㎍/㎥ during the heavy traffic time (9-10 am) and 2.30 ㎍/㎥ during non-heavy traffic times (p<0.001). The multiple linear regression analysis shows that the number of all types of vehicles and PM_2.5 concentrations in the atmosphere were factors increasing the GM of BC(ln(BC_30min)) concentrations (adjusted R²=0.42, p<0.001). The workers were constantly exposed to low concentrations (GM of BC_30min=2.44 ㎍/㎥), but they were exposed to peak concentrations instantly (BC_10sec=3545.04 ㎍/㎥). When the GM of BC_30min concentrations was momentarily represented as high, it was identified that a vehicle mainly using diesel fuel or an aging vehicle had passed. Conclusions: A ventilation system should be installed in the closed tollbooth or aging vehicles should be controlled so as not to pass tollbooths.

• 한국분말재료학회지
• /
• 제24권2호
• /
• pp.133-140
• /
• 2017

This study investigates the oxidation properties of Fe-14Cr ferritic oxide-dispersion-strengthened (ODS) steel at various high temperatures (900, 1000, and $1100^{\circ}C$ for 24 h). The initial microstructure shows that no clear structural change occurs even under high-temperature heat treatment, and the average measured grain size is 0.4 and $1.1{\mu}m$ for the as-fabricated and heat-treated specimens, respectively. Y-Ti-O nanoclusters 10-50 nm in size are observed. High-temperature oxidation results show that the weight increases by 0.27 and $0.29mg/cm^2$ for the as-fabricated and heat-treated ($900^{\circ}C$) specimens, and by 0.47 and $0.50mg/cm^2$ for the as-fabricated and heat-treated ($1000^{\circ}C$) specimens, respectively. Further, after 24 h oxidation tests, the weight increases by 56.50 and $100.60mg/cm^2$ for the as-fabricated and heat-treated ($1100^{\circ}C$) specimens, respectively; the latter increase is approximately 100 times higher than that at $1000^{\circ}C$. Observation of the surface after the oxidation test shows that $Cr_2O_3$ is the main oxide on a specimen tested at $1000^{\circ}C$, whereas $Fe_2O_3$ and $Fe_3O_4$ phases also form on a specimen tested at $1100^{\circ}C$, where the weight increases rapidly. The high-temperature oxidation behavior of Fe-14Cr ODS steel is confirmed to be dominated by changes in the $Cr_2O_3$ layer and generation of Fe-based oxides through evaporation.

• Applied Biological Chemistry
• /
• 제45권2호
• /
• pp.59-65
• /
• 2002

제주도 손바닥 선인장 열매 침출주를 열매 함량별과 주정의 알코올 농도별로 제조하여 침출기간에 따른 성분변화를 조사하였다. 제조한 침출액을 4개월간 침출시키면서 pH, 당도, 환원당, 알코올 농도, 폴리페놀 함량, 탁도 및 색도의 변화를 측정하고, 최종 제품에 대해 향기성분 분석과 관능검사를 수행하였다. 침출기간에 따라 pH, 알코올 농도, 폴리페놀 함량은 감소하였고 환원당 함량은 증가하였다. 이러한 변화는 주정의 알코올 농도별보다는 침출시키는 열매함량별에 따라 크게 나타났다. 탁도는 점차 커짐으로써 부유물의 생성이 증가함을 보였으나, 열매함량이 적고 주정의 알코올 농도가 높은 경우에는 그 정도가 가장 적었다. 명도와 황색도는 증가, 적색도는 감소하는 경향을 나타내었다. 향기성분으로는 acetaldehyde, acetyl acetone, ethyl alcohol, guaiacol, thymol, acetic acid phenyl ester등이 각각의 침출주에서 공통으로 검출되었고, 그 밖의 향기성분은 종류에 따라 다소 차이를 보였다. 최종 침출주에 대한 관능적 평가시 모든 항목에서 유의적인 (p<0.05)차이를 보였고, 전반적으로 알코올 농도 30% 주정에 열매를 67% 침출시킨 경우가 가장 높은 기호도를 보였다.

• 대한임상검사과학회지
• /
• 제38권1호
• /
• pp.16-21
• /
• 2006

Parallel testing means ordering a number of tests at the same time so abnormalities in any of the tests can be found quickly and used in making the diagnosis. This is a good medical strategy to eliminate diseases and it is relatively inexpensive if all the tests are potential sources of information and performed on the same analyzer. In regression, the equation for the straight line is recast as y = bx + a. This change in terminology leads to confusion. Here a is the y-intercept or constant and b is the coefficient or slope of the line. A few more words of caution about regression - as in all of statistics there are certain assumptions: the x value is a true measure, both X and Y distributions are normal, and homoscedasticity, i.e., the variance of y is the same for each value of x. In this study the linearity classification made by different scientists were always in agreement. Typical examples of curves that were considered linear are presented in Fig. 1-5. Because these automated procedures values were usually within five percent of each other the curvature could be easily detected. The plot of the WBC, RBC, hemoglobin, hematocrit and platelet concentrations from approximately 74.4 to $0{\times}10^3/{\mu}L$ and $80.4-0{\times}10^3/{\mu}L$, $5.6-0{\times}10^6/{\mu}L$ and $6.1-0{\times}1106/{\mu}L$, 18.3-0 g/dL and 19.0-0 g/dL, 54.1-0% and 56.8-0% and 642.0 to $0.03{\times}10^3{\mu}L$ and $754.0-0{\times}10^3/{\mu}L$ on the ADVIA 2120 C Versus and A and B typical of an acceptable linear study as shown in Fig. 1-5. The grand mean of R2, intercept and slope is 0.99898, 0.99459 and 1.54626.

• Restorative Dentistry and Endodontics
• /
• 제22권1호
• /
• pp.144-155
• /
• 1997

This study evaluated shear bond strength between porcelain and resin cement according to various surface treatments of porcelain, and surface condition of debonded porcelain. 50 porcelain specimens(Celay block A2M7) and composite resin specimens(Clearfil Photo-Bright) were prepared, and divided into 5 experimental groups according to the treatment method of porcelain surface. 5 experimental groups by surface treatments were as follows; CONTROL Group : No surface treatment was done on the surface of porcelains. SAND Group : The surface of porcelains were sandblasted with $50{\mu}m$ aluminum oxide for 5 seconds. HF Group: The surface of porcelains were etched with 8% Hydrofluoric acid for 4 minutes. SIL Group: The surface of porcelains were coated with silane coupling agent and heated at $100^{\circ}C$ for 5 minutes. SAND+HF+SIL Group : The surface of porcelains were sandblasted with $50{\mu}m$ aluminum oxide for 5 seconds and etched with 8% Hydrofluoric acid for 4 minutes, and coated with silane coupling agent and heated at $100^{\circ}C$ for 5 minutes. After surface treatments on the prepared porcelain surface two pastes of Panavia 21$^{(R)}$ were mixed, they were applied between composite resin block and porcelain surface, and then excessive resin cements were removed, and its margin was surrounded with Oxyguard II. All specimens were stored for 24 hours in water at $37^{\circ}C$ and tested with Instron testing machine between porcelains and resin cements, and debonded porcelain surfaces were observed under Scanning Electon Microscope(Hitachi S-2300) at 20kvp. The values from each group were compared statistically by Student's t-test. The obtained results were as follows; 1. The shear bond strength without surface treatment of porcelain was the lowest among all experimental groups(p<0.05). 2. The detached porcelain surface with sandblasting alone had more remarkable cracks than with only Hydrofluoric Acid or Silane coupling 2gent, but showed the lowest value of shear bond strength among surface treated groups(p<0.05), 3. When porcelain surface was treated by hydrofluoric acid, it affected shear bond strength more than silane coupling agent, but there were no significant statistical differences(p>0.05). 4. When three methods were combined to increase shear bond strength between porcelains and resin cements, its value was the highest than the others(p<0.05). 5. In Scannig Electron Micrograph of detached porcelain surface with no treatment, the sample revealed adhesive failure between the porcelain and resin cement whereas detached porcelain surface with combination of three method cohesive failure on the porcelain.

• 가정∙방문간호학회지
• /
• 제2권
• /
• pp.19-34
• /
• 1995

The purpose of this study was to analysis level on family caregiver's burden for the elderly with chronic disease in a rural area and to choose priority care group, thereby facilitating the development of interventions to reduce the caregiver's burden. For this purpose, data were collected by questionaire from June 10 to October 8, 1994. The instruments for data collection were Caregiver Burden Inventory by Novak(1989) and Zarit et al(1982), severity of dementia by Hughes Scales(1982), ADL by Lawton(1971), patients' family caregiving activity by pre-survey and reference review(Lee, 1993 ; Jang, 1990 ; Yoo, 1982). The subjects were 213 family caregiver of elderly with chronic disease in a rural area. The data was analysed by the use of t-test, ANOVA, correlation and multiple regression. The results were as follows ; 1. Total burden was evaluated below average, the mean of family burden was 46.98. By the diagnostic classification, Hypertension was 27.37, DM 32.46, CVA 62.96, Dementia 61.24. 2. Significant variables which were correlated to the family caregiver's burden were the patient's disease diagnosis (F=33.82, p<0.001), severity of dementia(F=30.52, p<0.001), the status of disease management(F=11.53, p<0.001), ADL(F=10.54, p<0.001), PADL(F=7.50, p<0.001), income(F=7.17, p<0.001), caregiver's health status(F=24.53, p<0.001), a view of patient's prognosis (F=22.17, p<0.001), relationship with the patient(F=33.82, p<0.001), the number of hours per day spent on caregiving(F=77.52, p<0.001), level of intimacy of caregiver and patients(F=8.75, p<0.001), level of helping(F=4.90, p<0.01), the frequency of caregiving activity(F=3.80, p<0.01), the number of admission(F=5.54, p<0.01), the length of caregiving(F=4.43, p<0.01), other chronic patient in family(t=2.81, p<0.01), caregiver's job(F=3.11, p<0.01), the duration of illness(F=2.98, p<0.05), caregiver's religion(F=2.93, p<0.05), medical security(F=3.89, p<0.05), caregiving's helper(t=2.42, p<0.05). 3. PADL was the most important predictor to family caregiver burden(R2=0.6611). In addition to this, IADL, caregiver's health status, the length of caregiving. level of intimacy of caregiver and patients, patient's age, the patient's disease diagnosis and patient's job accounted for 76% of family caregiver burden. 4. The criteria of priority care group were as follows ; the mean of family caregiver burden was above 58, above of moderate ADL, the number of hours per day spent on caregiving above of 8 hours, above of moderate dementia. By the diagnostic classification, number of priority care group, Hypertension was 4 (8.0%), DM 4(8.0%), CVA 34(64.1%), Dementia 45(75.0%).