• 한국식품영양과학회지
• /
• 제38권1호
• /
• pp.98-104
• /
• 2009

본 연구는 $60^{\circ}C$ 고온저장 조건에서 4주 동안 PET 포장된 녹차음료의 품질 변화 특성과 품질열화를 최소화할 수 있는 포장 근거를 마련하기 위하여 PET 포장용기의 산소투과성 및 cap의 밀봉 안정성을 조사하였다. 고온저장 조건에서 MXD6 blend PET는 가스 차단성이 우수하였으며 4주 동안 TEN cap의 removal torque 변화도 적게 나타났다. 4주 동안 고온저장 중 녹차음료의 pH, 색도 및 비타민 C 및 카테킨 함량은 유의적으로 변화하였고 카페인과 총 아미노산의 함량은 고온저장 중 크게 변화하지 않았다. Hexanol, linalool, menthol 및 ${\alpha}$-terpineol 4종의 alcohol류 향기성분은 고온저장 3주차까지 급격한 함량 증가를 보였고 d-limonene은 큰 변화가 없었다. 관능평가 결과는 떫은맛과 향, 전체적인 맛은 기호도가 낮아지는 결과를 보였다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2010년도 춘계학술발표대회 초록집
• /
• pp.74-74
• /
• 2010

모바일 정보통신기기를 중심으로 전자패키지의 초소형화, 고집적화를 위해 플립칩 공법의 적용이 증가되고 있는 추세이다. 플립칩 패키징 접합소재로는 솔더, ICA(Isotropic Conductive Adhesive), ACA(Anisotropic Conductive Adhesive), NCA(Non Conductive Adhesive) 등과 같은 다양한 접합소재가 사용되고 있다. 최근에는 언더필을 사용하는 플립칩 공법보다 미세피치 대응성을 위해 NCP를 이용한 플립칩 공법에 대한 요구가 증가되고 있는데, NCP의 상용화를 위해서는 공정성과 함께 신뢰성 확보가 필요하다. 본 연구에서는 LDI(LCD drive IC) 모듈을 위한 COF(Chip-on-Film) 플립칩 패키징용 NCP 포뮬레이션을 개발하고 이를 적용한 COF 패키지의 신뢰성을 조사하였다. 테스트베드는 면적 $1.2{\times}0.9mm$, 두께 $470{\mu}m$, 접속피치 $25{\mu}m$의 Au범프가 형성된 플리칩 실리콘다이와 접속패드가 Sn으로 finish된 폴리이미드 재질의 flexible 기판을 사용하였다. NCP는 에폭시 레진과 산무수물계 경화제, 이미다졸계 촉매제를 사용하여 다양하게 포뮬레이션을 하였다. DSC(Differential Scanning Calorimeter), TGA(Thermogravimetric Analysis), DEA(Dielectric Analysis) 등의 열분석장비를 이용하여 NCP의 물성과 경화거동을 확인하였으며, 본딩 후에는 보이드를 평가하고 Peel 강도를 측정하였다. 최적의 공정으로 제작된 COF 패키지에 대한 HTS (High Temperature Stress), TC (Thermal Cycling), PCT (Pressure Cooker Test)등의 신뢰성 시험을 수행한 결과 양산 적용 가능 수준의 신뢰성을 갖는 것을 확인할 수 있었다.

• 한국수소및신에너지학회논문집
• /
• 제26권4호
• /
• pp.347-356
• /
• 2015

A study has been conducted numerically to investigate the lifted flat syngas flame structure of impinging jet flame configuration with the global strain rates in 10% hydrogen content. In this study, the effects of strain rate were major parameters on chemistry kinetics and flame structure at stagnation point. The numerical results were calculated by SPIN application of the CHEMKIN package. The strain rates were adjusted with Reynolds numbers of premixed syngas-air mixture. Different flame shapes were observed with different strain rates. As strain rate has increased, the flame temperature and axial velocity have been decreased due to the flame heat loss increment, and the OH radical reaction zones become narrower but each mole fractions are still constant. Also, the reversion of $H_2O$ product near stagnation point has been found out when strain rate has increased. This phenomenon is attributed to the rapid production of oxidizing radical reaction such as the R12 ($H+O_2(+M)=HO_2(+M)$), which makes the R18 ($HO_2+OH=O_2+H_2O$) reaction increment.

• 한국치위생학회지
• /
• 제18권5호
• /
• pp.797-806
• /
• 2018

Objectives: The purpose of this study was to analyze Influence of stress on oral health and quality of life. Methods: The participants were 172 students from 4 universities located in DaeJeon, South Korea. A questionnaire was administered, assessing the impacts of the general characteristics of the participants, temporomandibular joint (TMJ) symptoms, xerostomia, and halitosis on stress. And oral impacts on daily performance were also investigated. Data were analyzed using the Statistical Package for the Social Sciences 18.0. Results: The level of stress was higher in female, and the causes of stress was reported scholastic achievement, relations with professors, get a job. The students who were higher stress were more conscious of TMJ symptoms, xerostomia and halitosis(p<0.05). Stress was significantly positively correlated with TMJ symptoms (r=0.376, p<0.001), dry mouth (r=0.360, p<0.001), and bad breath (r=0.343, p<0.001). Oral Impacts on Daily Performance (OIDP) scores were significantly positively correlated with dry mouth, bad breath, TMJ symptoms, and stress. Regression analysis showed that 54.5% of the independent variables were related to OIDP scores. Stress and TMJ symptoms exerted a significant effect on OIDP scores. Conclusions: Stress among university students affects oral health and quality of life. Stress coping mechanisms and oral health care education programs should be developed and applied at universities.

• 한국전자파학회논문지
• /
• 제27권12호
• /
• pp.1075-1083
• /
• 2016

최근 높은 편의성과 휴대성을 바탕으로 무선 입력 장비들의 사용이 증가하고 있다. 특히 2.4 GHz 주파수 대역을 사용하는 무선 키보드와 무선 마우스가 가장 많이 사용되고 있지만, 무선 장비의 경우 누설되는 전자파를 제3자가 수신하여 개인정보를 획득하기가 용이하기 때문에, 보안에 대한 취약점 또한 꾸준히 보고되고 있다. 본 논문에서는 2.4 GHz 무선 키보드와 무선 마우스의 취약점을 검증하기 위해 USRP 장비와 GNU 라디오(Radio) 패키지를 사용하여 2.4 GHz 무선 키보드와 무선 마우스의 패킷을 분석하고, 이를 조작하는 시스템을 구현하였다. 구축한 시스템을 이용하여 해당 장비의 통신 프로토콜 및 패킷 구조를 분석하여 장비 고유 주소(Address)와 입력 키 정보를 획득하였고, 임의의 키를 송신하여 원거리에서 사용자 PC를 조작할 수 있다는 것을 증명하였다.

• 보건교육건강증진학회지
• /
• 제15권1호
• /
• pp.1-30
• /
• 1998

A study on skin care was conducted in order to develop proper skin care program and disseminate the Information to the consumers. The study was performed from October 2, 1997 though April 30 1997 by using questionnaires. The subjects were 1,793 from lug cities of Seoul, Pusan and, and 800 from medium and small cities of Kyongsan, Kimchon, Mokpo and KimHae cities. All subjects were females over 20 years. 1. 64.3% of the subjects said that they chose the massage packs after considering their skin condition. 55.1% of the subjects said that they did not know the side effects of the massage packs. 2. 53.3% of the subjects reported that they knew the cause of acne. and 73.3% of the respondents reported that they knew the nature of their body classified by oriental medicine. 3. The average knowledge and attitude was 10.61 :t3.46%( who it is converted to percent, it is 53.1%). The upper limit was 18.9% and lower limit was 19.0%. 4. The factors which are under the influence on knowledge of skin care were the times of massage, education level, the height of subjects, disease of skin, age, the degree of fatty body, the hour of make-up(R2=0.137). 5. The factors which are under the influence on the times of massage were education level, the experience of skin side effect, the status of physic8I health and the birth place of the subjects(R2=0.139). 6. The main factors which had significant effect on the status of face skin health were the status of physical health, economic status, age, the side effect of skin cosmetic, and the hour of make-up(R2=0.140). 7. Finally, it is recommended that training package on side effect of cosmetics, massage, physical characteristics and proper way of make-ups, and the public should be educated on the above mentioned areas.

• 한국조경학회지
• /
• 제30권3호
• /
• pp.73-85
• /
• 2002

The purpose of this study was to develop prediction models for plant species abundance by stream restoration. Generally the stream plant is affected by stream gemophology. So in this study, the relationship between the vegetation abundance and stream gemophology was developed by multiple regression analysis. The stream characteristics utilized in this study were longitudinal slope, transectional slope, micro-landforms through the longitudinal direction, riparian width and geometric mean diameter and biggest diameter of bed material, and cumulated coarse and fine sand weight portion. The Pyungchang River with mountainous watershed and the Kyungan stream and the Bokha stream in the agricultural region were selected and vegetation species abundance and stream characteristics were documented from the site at 2~3km intervals from the upper stream to the lower. The Models for predicting the vegetation abundance were developed by multiple regression analysis using SPSS statistics package. The linear relationship between the dependant(species abundance) and independant(stream characteristics) variables was tested by a graphical method. Longitudinal and transectional slope had a nonlinear relationship with species abundance. In the next step, the independance between the independant variables was tested and the correlation between independant and dependant variables was tested by the Pearson bivariate correlation test. The selected independant variables were transectional slope, riparian width, and cumulated fine sand weight portion. From the multiple regression analysis, the $R^2$for the Pyungchang river, Kyungan stream, Bokga stream were 0.651, 0.512 and 0.240 respectively. The natural stream configuration in the Pyungchang river had the best result and the lower $R^2$for Kyunan and Bokha stream were due to human impact which disturbed the natural ecosystem. The lowest $R^2$for the Bokha stream was due to the shifting sandy bed. If the stream bed is fugitive, the prediction model may not be valid. Using the multiple regression models, the vegetation abundance could be predicted with stream characteristics such as, transection slope, riaparian width, cumulated fine sand weigth portion, after stream restoration.

• 대한가정학회지
• /
• 제40권9호
• /
• pp.127-141
• /
• 2002

This research aims to examine the influence of facilitative communication between mother and high school daughter on daughter's perceived family cohesion, family adaptability, and satisfaction of mother's working or non-working status. In order to verify statistically the research questions above, experimental tools were made for each variable, and Cluster Sampling with Stratification was conducted among high school girls in Seoul. A total of 670 questionnaire sheets were administered to 13 high schools for girls in December 2001, and only 501 sheets were used for data analysis. The SPSS 10.0 package was used for factor analysis, reliability analysis, multiple regression analysis. The following results were obtained: 1) Mother-high school daughter's facilitative communication significantly influences daughter's perceived family cohesion. In general, mother-high school daughter's facilitative communication had R square of 27.6% with regards to daughter's perceived family cohesion. 2) Mother-high school daughter's facilitative communication significantly influences daughter's perceived family adaptability. In general, mother-high school daughter's facilitative communication had R square of 25.3% with regards to daughter's perceived family adaptability. 3) Mother-high school daughter's facilitative communication significantly influences daughter's perceived satisfaction of mother's working of non-working status. In general, mother-high school daughter's facilitative communication had R square of 24.0% with regards to daughter's perceived satisfaction of mother's working status, and 7.4% with regards to non-working status.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.242-242
• /
• 2006

Increasingly complex tasks are performed by computers or cellular phone, requiring more and more memory capacity as well as faster and faster processing speeds. This leads to a constant need to develop more highly integrated circuit systems. Therefore, there have been numerous studies by many engineers investigating circuit patterning. In particular, PCB including module/package substrates such as FCB (Flip Chip Board) has been developed toward being low profile, low power and multi-functionalized due to the demands on miniaturization, increasing functional density of the boards and higher performances of the electric devices. Imprint lithography have received significant attention due to an alternative technology for photolithography on such devices. The imprint technique. is one of promising candidates, especially due to the fact that the expected resolution limits are far beyond the requirements of the PCB industry in the near future. For applying imprint lithography to FCB, it is very important to control thermal properties and mechanical properties of dielectric materials. These properties are very dependent on epoxy resin, curing agent, accelerator, filler and curing degree(%) of dielectric materials. In this work, the epoxy composites filled with silica fillers and cured with various accelerators having various curing degree(%) were prepared. The characterization of the thermal and mechanical properties wasperformed by thermal mechanical analysis (TMA), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), rheometer, an universal test machine (UTM).

• Coupled systems mechanics
• /
• 제8권4호
• /
• pp.315-338
• /
• 2019

The numerical investigations have been carried out on reinforced concrete slab against blast loading to demonstrate the accuracy and effectiveness of the finite element based numerical models using commercial package ABAQUS. The response of reinforced concrete slab have been studied against the influence of weight of TNT, standoff distance, boundary conditions, influence of air blast and surface blast. The results thus obtained from simulations were compared with the experiments available in literature. The inelastic behavior of concrete and steel reinforcement bar has been incorporated through concrete damage plasticity model and Johnson-cook models available in ABAQUS were presented. The predicted results through numerical simulations of the present study were found in close agreement with the experimental results. The damage mechanism and stress response of target were assessed based on the intensity of deformations, impulse velocity, von-Mises stresses and damage index in concrete. The results indicate that the standoff distance has great influence on the survivability of RC slab against blast loading. It is concluded that the velocity of impulse wave was found to be decreased from 17 to 11 m/s when the mass of TNT is reduced from 12 to 6 kg. It is observed that the maximum stress in the concrete was found to be in the range of 15 to $20N/mm^2$ and is almost constant for given charge weight. The slab with two short edge discontinuous end condition was found better and it may be utilised in designing important structures. Also it is observed that the deflection in slab by air blast was found decreased by 60% as compared to surface blast.