• 마이크로전자및패키징학회지
• /
• 제21권3호
• /
• pp.25-29
• /
• 2014

본 연구에서는 친환경적이고, 보관수명이 1년 이상이며, 부식특성이 좋은 플라즈마 유기막 표면처리에 대한 솔더링 특성을 기존 표면처리법인 OSP와 비교하였다. 플라즈마 표면처리는 할로겐계 전구체를 사용하여 CVD 방법으로 증착하였고, 증착두께는 20 nm이었다. 본 연구에서 사용된 솔더 조성은 Sn-3.0 wt%Ag-0.5 wt%Cu이었다. 염수분무시험에서 플라즈마 표면처리 유기막은 OSP보다 우수한 부식 저항성을 나타내었다. 멀티리플로우 조건에서 플라즈마 표면처리는 OSP보다 우수한 솔더 퍼짐성을 나타내었다. 솔더링 후 단면 미세조직을 분석한 결과, 플라즈마 표면처리와 OSP시편 모두 유사한 금속간화합물층 두께 및 형상을 갖고 있었다. 플라즈마 표면처리와 OSP 모두 유사한 접합강도를 가지고 있었다.

• Steel and Composite Structures
• /
• 제17권5호
• /
• pp.687-704
• /
• 2014

A great number of moment-resisting steel structures collapsed due to ductile crack initiation at welded beam-column connections, followed by explosive brittle fracture in the Kobe (Hyogoken-Nanbu) earthquake in 1995. A series of experimental and numerical studies on cracking behaviors of beam-column connections in steel bridge piers were carried out by the authors' team. This paper aims to study the effect of post weld treatment on cracking behaviors of the connections during a strong earthquake event. Experiments of three specimens with different weld finishes, i.e., as-welded, R-finish, and burr grinding, were conducted. The experimental results indicate that the instants of ductile crack initiation are greatly delayed for the specimens with R-finish and burr grinding finishes compared with the as-welded one. The strain concentration effect in the connection is also greatly reduced in the specimens with post weld treatment compared with the as-welded one, which was also verified in the tests.

• 월간포장계
• /
• 통권312호
• /
• pp.71-75
• /
• 2019

• 대한조선학회 특별논문집
• /
• 대한조선학회 2006년도 특별논문집
• /
• pp.40-45
• /
• 2006

For ships of ice class, finish Maritime Administration(FMA) requires brackets on intersections between longitudinal frames and the web frames within the ice-strengthened area. The main object of this paper is to verify ultimate load carrying capacity of longitudinal frame without brackets of engine room region of 74,100 DWT Product Oil Tanker. Comparative approach between proposed structures from builder (the proposed structure) and structures satisfying the Finnish-Swedish ice class rules (the rule structure) is used for the analysis.

• 마이크로전자및패키징학회지
• /
• 제22권2호
• /
• pp.47-53
• /
• 2015

인쇄회로기판 솔더 상부 및 하부 접합부의 서로 다른 표면처리 조건에 따른 Sn-3.0Ag-0.5Cu (SAC305) 접합부의 열처리 및 전류 인가에 따른 금속간 화합물 성장거동을 비교하기 위하여 in-situ 미세구조분석 및 electromigration (EM) 수명평가를 실시하였다. 솔더 접합 직후, 상부 접합부의 electroless nickel immersion gold (ENIG) 표면처리에서는 $(Cu,Ni)_6Sn_5$, 하부 접합부의 organic solderability preservative (OSP) 표면처리에서는$ Cu_6Sn_5$, $Cu_3Sn$ 금속간 화합물이 접합 계면에서 생성되었다. EM 수명평가 결과 온도 $130^{\circ}C$, 전류밀도 $5.0{\times}10^3A/cm^2$ 하에서 평균파괴시간이 약 78.7 hrs으로 도출되었고, 하부 OSP 표면처리에서 전자가 솔더로 빠져나가는 부분에서 Cu의 소모에 의한 단락이 주 손상기구로 확인되었다. In-situ 주사전자현미경을 통해 계면 미세구조 분석 결과 상부 접합부 ENIG 표면처리에서 전자의 방향에 따른 미세구조의 큰 차이가 없고 뚜렷한 손상이 관찰되지 않았으나, 하부 접합부 OSP 표면처리의 경우 전자가 솔더로 유입되는 부분에서 빠른 Cu 소모로 인한 보이드 성장이 관찰되었다. 따라서, SAC305무연솔더 접합부에서 ENIG 표면처리가 OSP 표면처리보다 보다 우수한 EM확산방지막 역할을 하여 금속간 화합물 성장을 억제하고 보다 우수한 EM 신뢰성을 보이는 것으로 판단된다.

• 한국의류학회지
• /
• 제17권1호
• /
• pp.151-161
• /
• 1993

The purpose of this study was to investigate the effect of hydrophilic finish for polyester (PET) fabric and hydrophobic finish for cotton fabric on the water transport and comfort properties. Polyester fabric was treated with 10% sodium hydroxide solution to impart hydrophilicity. Cotton fabric was sprayed with Scotch-gard$^{(R)}$ water and oil repellent finish to impart hydrophobicity. Porosity, air permeability, contact angle, wickability and water vapor transport rate (WVTR) were measured to determine the water transport properties of fabrics. To compare the comfort properties of treated and untreated fabrics, wear test was performed by putting fabric patches on the upper back: stratum corneum water content (SCWC), subjective wettedness and comfort rating were determined. The results were as follows: (1) The contact angle of water on treated polyester fabric was decreased and that of treated cotton fabric was increased. Also, the wickability of treated polyester fabric was increased and the wickability of cotton fabric was decreased. (2) Although each finish did not change porosity, the water vapor transport rate of treated polyester fabric was increased and that of treated cotton fabric was decreased slightly. (3) The results of stratum corneum water content measurements showed good agreement with the results of the contact angle and the wickability, i.e., the better the liquid water transport properties are, the less the stratum corneum water contents were resulted. (4) The realtionship of subjective wettedness or comfort and stratum corneum water content was independent. Therefore, it was concluded that human perception on the subjective wettedness or the comfort is affected by the skin contact of wet fabric rather than by the stratum corneum water content.

• 한국재료학회지
• /
• 제12권9호
• /
• pp.750-760
• /
• 2002

In this study, three solders, Sn-37Pb, Sn-3.5Ag, and Sn-3.8Ag-0.7Cu were screen printed on both electroless Ni/Au and OSP metal finished micro-via PCBs (Printed Circuit Boards). The interfacial reaction between PCB metal pad finish materials and solder materials, and its effects on the solder bump joint mechanical reliability were investigated. The lead free solders formed a large amount of intermetallic compounds (IMC) than Sn-37Pb on both electroless Ni/Au and OSP (Organic Solderabilty Preservatives) finished PCBs during solder reflows because of the higher Sn content and higher reflow temperature. For OSP finish, scallop-like $Cu_{6}$ /$Sn_{5}$ and planar $Cu_3$Sn intermetallic compounds (IMC) were formed, and fracture occurred 100% within the solder regardless of reflow numbers and solder materials. Bump shear strength of lead free solders showed higher value than that of Sn-37Pb solder, because lead free solders are usually harder than eutectic Sn-37Pb solder. For Ni/Au finish, polygonal shaped $Ni_3$$Sn_4$ IMC and P-rich Ni layer were formed, and a brittle fracture at the Ni-Sn IMC layer or the interface between Ni-Sn intermetallic and P-rich Ni layer was observed after several reflows. Therefore, bump shear strength values of the Ni/Au finish are relatively lower than those of OSP finish. Especially, spalled IMCs at Sn-3.5Ag interface was observed after several reflow times. And, for the Sn-3.8Ag-0.7Cu solder case, the ternary Sn-Ni-Cu IMCs were observed. As a result, it was found that OSP finished PCB was a better choice for solders on PCB in terms of flip chip mechanical reliability.

• 한국건축시공학회지
• /
• 제10권1호
• /
• pp.137-145
• /
• 2010

석조 건조물의 역학적 성질은 일반적으로 석재 강도의 관점에서 설명된다. 강도를 측정하기 위해서 문화재의 훼손이 없는 초음파속도의 측정 방법이 이용되고 있다. 현재 시행되고 있는 초음파속도법은 표면거칠기, 석재 두께 등에 대한 보정을 실시하지 않고 있는 실정이다. 그리고 그리스와 같은 접촉재 사용으로 문화재의 표면에 오염이 발생할 수 있다. 따라서 본 연구에서는 석조 건조물의 강도를 간접법으로 추정하기 위하여 석재 표면거칠기, 석재두께, 접촉재의 종류, 초음파속도 측정방법 등을 주변수로 석재 간접법 강도 추정식을 제안한다. (1) 잔다듬 석재 초음파속도법에 의한 강도 추정식 : $f_{su}=19.1{\times}V_p+18.3(R^2=76.0)$ (2) 거친다듬 석재 초음파속도법에 의한 강도 추정식 : $f_{su}=7.9{\times}V_p+64.6(R^2=69.8)$.

• 마이크로전자및패키징학회지
• /
• 제22권3호
• /
• pp.51-56
• /
• 2015

솔더 조인트의 신뢰성 강화를 위해서 다양한 pad finish material이 사용되고 있으며, 최근에는 Electroless Ni Electroless Pd Immersion Gold (이하 ENEPIG) pad가 많이 사용되고 있다. 따라서, 본 연구는 상용화 되어 사용중인 Electrolytic Ni (soft Ni) pad와 최근 이슈가 되고 있는 ENEPIG pad에 대한 신뢰성 평가에 관한 것으로, 다양한 Cu 함량에 따른 거동을 관찰 하였다. Reflow 후 솔더와 pad간의 접합층은 $Cu_6Sn_5$에 Ni이 치환된 형태의 금속간 화합물로 구성되어 있었으며, ENEPIG pad의 경우, 접합층과 Ni layer 사이에 $Ni_3P$ (dark layer) layer가 관찰 되었다. 또한, Cu 함량에 따라 Dark layer의 두께를 제어할 수 있었다. 충격 낙하 시험 후, 파괴모드를 관찰한 결과 soft Ni pad와 ENEPIG pad에서 서로 다른 파괴모드가 관찰 되었으며, soft Ni의 경우, 1차 IMC와 2차 IMC 경계에서 파괴가 관찰 되었고, ENEPIG pad의 경우, dark layer에서 파괴가 관찰 되었다. IMC와 pad material, bulk 솔더와의 lattice mismatch에 의해 불안정한 계면이 존재하며, 이는 연속적인 외부 충격에 의해 가해진 열적, 물리적 스트레스를 IMC 계면으로 전송하기 때문에, 솔더의 신뢰성 향상을 위해서는 솔더 벌크의 제어와 IMC의 두께 및 형상의 제어는 필요하다.

• The Journal of Advanced Prosthodontics
• /
• 제7권4호
• /
• pp.271-277
• /
• 2015

PURPOSE. This study was to evaluate the marginal fit of two CAD-CAM anatomic contour zirconia crown systems compared to lithium disilicate glass-ceramic crowns. MATERIALS AND METHODS. Shoulder and deep chamfer margin were formed on each acrylic resin tooth model of a maxillary first premolar. Two CAD-CAM systems (Prettau$^{(R)}$Zirconia and ZENOSTAR$^{(R)}$ZR translucent) and lithium disilicate glass ceramic (IPS e.max$^{(R)}$press) crowns were made (n=16). Each crown was bonded to stone dies with resin cement (Rely X Unicem). Marginal gap and absolute marginal discrepancy of crowns were measured using a light microscope equipped with a digital camera (Leica DFC295) magnified by a factor of 100. Two-way analysis of variance (ANOVA) and post-hoc Tukey's HSD test were conducted to analyze the significance of crown marginal fit regarding the finish line configuration and the fabrication system. RESULTS. The mean marginal gap of lithium disilicate glass ceramic crowns (IPS e.max$^{(R)}$press) was significantly lower than that of the CAD-CAM anatomic contour zirconia crown system (Prettau$^{(R)}$Zirconia) (P<.05). Both fabrication systems and finish line configurations significantly influenced the absolute marginal discrepancy (P<.05). CONCLUSION. The lithium disilicate glass ceramic crown (IPS e.max$^{(R)}$press) had significantly smaller marginal gap than the CAD-CAM anatomic contour zirconia crown system (Prettau$^{(R)}$Zirconia). In terms of absolute marginal discrepancy, the CAD-CAM anatomic contour zirconia crown system (ZENOSTAR$^{(R)}$ZR translucent) had under-extended margin, whereas the CAD-CAM anatomic contour zirconia crown system (Prettau$^{(R)}$Zirconia) and lithium disilicate glass ceramic crowns (IPS e.max$^{(R)}$press) had overextended margins.