• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 추계학술대회
• /
• pp.100-105
• /
• 2003

With the recent development of machining technology, high speed machining process is widely used for-the mold and difficult-to -cut-materials machining since it allows achieving high productivity and surface quality. However, during the high speed machining process, high cutting speed and feed rate can cause abrupt tool life decrease due to rapid rising of the cutting tool temperature. Such situation may cause increase of machining cost. Thus, in this study, developed optimization algorithm is applied to determine optimal machining variables for multiple high speed machining. The R-T characteristic curve for machining economics problems with a linear-lorarithmic tool life model is determined by applying sensitivity analysis. finally, a series of high speed machining experiments are performed to determine the desired optimal machining variables, and the results are analyzed.

• 한국정밀공학회지
• /
• 제14권7호
• /
• pp.99-107
• /
• 1997

An algorithm is developed to find optimal machining parameters for multiple machining environments. The cutting rate-tool life (R-T) characteristic curve presents the general loci of optima and is useful for the flexible machining operations planning. The R-T characteristic curve for the machining economics prob- lems with linear-logarithmic tool lofe model may be determined by applying sensitivity analysis to log-dual problems. Three cases of the change of machining environments are considered. An end milling example is constructed to illustrate the algorithm.

• 한국컴퓨터그래픽스학회논문지
• /
• 제7권3호
• /
• pp.1-7
• /
• 2001

본 논문에서는 canal 곡면의 투시 윤곽곡선 (perspective silhouette)에 대한 매개변수화 (parametrization) 방법과 윤곽곡선을 이루는 모든 연결된 구성요소 (connected component)를 발견하는 효율적이고 안정성 있는 알고리즘을 제시한다. Canal 곡면은 반경이 변화하면서 이동하는 구 (moving sphere)의 외곽곡면 (envelope surface)이며, 구의 중심점의 궤적을 나타내는 곡선 C(t)와 구의 반경 함수 r(t)에 의해 정의된다. 이동 구는 canal 곡면과 원에서 교차한다. Canal 곡면을 원의 집합으로 분할함으로써, 각각의 원 위에서 주어진 관측점에 대한 투시적 윤곽곡선을 구성하는 점을 계산하여 매개변수화하는 방법을 제시한다. 고정된 중심점 $C(t_*)$와 반경 $r(t_*)$를 갖는 이동 구는 canal 곡면과 하나의 원 $K(t_*)$에서 교차한다. 또한 이동 구를 관측점에서 볼 때의 윤곽곡선도 다른 하나의 원 $Q(t_*)$을 구성한다. 두 원 $K(t_*)$와 $Q(t_*)$가 한 점에서 접하게 되는 t의 값을 구함으로써 canal 곡면에 대한 윤곽곡선을 이루는 모든 연결된 구성요소를 발견하는 효율적인 방법을 제시한다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.345-350
• /
• 2001

In order to perform elastic-plastic fracture mechanical analyses, fracture resistance curves for concerned materials are required. 1T-CT specimen was used to obtain fracture resistance curves. But the fracture resistance curve by the 1T-CT specimen was very conservative to evaluate the integrity of the structure. And fracture resistance curve was affected by the specimen geometry and crack plane orientation. The objective of this paper is to be certain the conservativeness of the fracture resistance curve by the 1T-CT specimen and to provide the additional safety margin. For these, the fracture tests using the real pipe specimen and standard 1T-CT specimen test were performed. 4-point bending jig was manufactured for pipe test and direct current potential drop method was used to measure the crack extension and length for pipe test. From the pipe and the 1T-CT specimen test results, it was observed that the J-integral of the 1T-CT specimen test at the crack initiation point was very small compare to that of the pipe specimen test.

• Kyungpook Mathematical Journal
• /
• 제56권2호
• /
• pp.583-595
• /
• 2016

Archimedes showed that for a point P on a parabola X and a chord AB of X parallel to the tangent of X at P, the area S of the region bounded by the parabola X and chord AB is four thirds of the area T of triangle ${\Delta}ABP$. It is well known that the area U formed by three tangents to a parabola is half of the area T of the triangle formed by joining their points of contact. Recently, the first and third authors of the present paper and others proved that among strictly locally convex curves in the plane ${\mathbb{R}}^2$, these two properties are characteristic ones of parabolas. In this article, in order to generalize the above mentioned property $S={\frac{4}{3}}T$ for parabolas we study strictly locally convex curves in the plane ${\mathbb{R}}^2$ satisfying $S={\lambda}T+{\nu}U$, where ${\lambda}$ and ${\nu}$ are some functions on the curves. As a result, we present two conditions which are necessary and sufficient for a strictly locally convex curve in the plane to be an open arc of a parabola.

• 호남수학학술지
• /
• 제37권1호
• /
• pp.41-52
• /
• 2015

It is well known that the area U of the triangle formed by three tangents to a parabola X is half of the area T of the triangle formed by joining their points of contact. Recently, it was proved that this property is a characteristic one of parabolas. That is, among strictly locally convex $C^{(3)}$ curves in the plane $\mathbb{R}^2$ parabolas are the only ones satisfying the above area property. In this article, we study strictly locally convex curves in the plane $\mathbb{R}^2$. As a result, generalizing the above mentioned characterization theorem for parabolas we present some conditions which are necessary and sufficient for a strictly locally convex $C^{(3)}$ curve in the plane to be an open part of a parabola.

• 한국콘텐츠학회논문지
• /
• 제5권5호
• /
• pp.296-304
• /
• 2005

고양이 뇌 지방색전증을 유발한 후 자기공명 관류영상기법을 이용하여 대뇌혈류량을 정량적으로 분석하고 동적특성 변화를 구현 할 수 있는 기법을 제안한다. 고양이 20마리를 대상으로 한쪽 내경동맥에 리노레익 (n=11)을 주입하여 뇌 지방색전을 유발시켰고, 대조군으로는 이바론 입자 (n=9)를 주입하여 색전이 유발되게 하였다. 그 후 30분과 2시간에 각각 T2강조, 확산강조영상을 획득하고 가장 색전이 많이 일어난 부위에서 관류강조영상을 획득하였다. 획득한 데이터는 IDL 소프트웨어와 자체 개발한 영상처리 알고리즘을 이용하여 신호강도 곡선을 ${\Delta}R_2^*$ 곡선으로 변환한 후 적분하여 뇌혈류량을 측정하였다. 실험군에서 병변부위의 뇌혈류량은 정상부위에 비해 감소하였으며, 뇌혈류량 비는 시간경과에 따라 유의한 차이가 있었다 (P<0.005). 뇌 지방색전증의 초기에는 혈류량이 감소하였으나, 2시간에서는 30분에 비해 뇌혈류량이 다소 증가됨을 관찰 할 수 있었다. 뇌경색 발생시 조기에 자기공명확산 및 관류강조영상을 획득하여 개발한 영상처리 알고리즘을 적용하여 뇌 혈류량의 다양한 동적변화 특성 및 혈류역학적 변화를 상대적 관류도 맵으로 얻을 수 있었다.

• 대한의용생체공학회:의공학회지
• /
• 제25권4호
• /
• pp.243-251
• /
• 2004

자기공명 관류영상기법을 이용하여 고양이 뇌 지방색전증 유발한 후 대뇌혈류량을 정량적으로 분석하고 동적특성 변화를 구현하고자 하였다. 고양이 44마리를 대상으로 일측 내경동맥에 트리올레인 (n=15), 올레익 (n=9) 및 리노레익 (n=11)을 주입하여 뇌 지방색전을 유발시켰고, 대조군으로는 이바론 입자 (n=9)를 주입하여 색전이 유발되게 하였다. 그 후 30분과 2시간에 각각 T2강조, 확산강조영상을 획득하고 가장 색전이 많이 일어난 부위에서 관류강조영상을 얻었다. 획득한 데이터는 자체 개발한 영상처리 프로그램과 IDL 소프트웨어를 이용하여 신호강도 곡선을 ΔR$_2$＊ 곡선으로 변환한 후 적분하여 뇌혈류량을 측정하였다. 모든 군에서 병변부위의 뇌혈류량은 정상부위에 비해 감소하였다. 실험 각 군별 뇌혈류량 비는 시간경과에 따라 유의한 차이가 있었으며 (P＜0.005), 2시간에서는 30분에 비해 뇌혈류량이 다소 회복되었다. 뇌 지방색전증의 초기에는 혈류량이 감소하였다. 뇌경색 발생시 조기에 DWI와 PWI을 획득하여 뇌 혈류량의 다양한 동적변화 특성 및 혈류역학적 변화에 대한 정보를 임상적으로 제공 할 수 있으리라 여겨진다.

• Journal of Welding and Joining
• /
• 제7권1호
• /
• pp.42-50
• /
• 1989

The application of fracture mechanics is being increased gradually to assess the safety of welded structures containing crack. Fatigue crack propagation behavior and elastic-plastic fracture toughness J$_{IC}$ of home made flux cored wire(1.22mm) CO$_{2}$ weldments was discussed. Especially fatigue crack propagation test was carried out by .DELTA.K control instead of load control and elastic-plastic fracture toughness J$_{IC}$ was obtained by ASTM-R curve method on C.T.specimen in transverse direction of weldments. The results obtained are as follows; (1) Weld metal presented an almost complete similarity to base metal on fatigue crack propagation rate in transverse direction. (2) Weld metal was more than base metal on J$_{IC}$ value in transverse direction. (3) F.C.W. CO$_{2}$ weldments had an excellent characteristic of fatigue crack propagation rate and J$_{IC}$ in less than 50kg/mm$^{2}$ steel grade, this would result from that weld metal had good static strength.trength.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.271-272
• /
• 2012

Bulk Metallic Glasses (BMGs or amorphous alloy) exhibit high strength and good corrosion resistance. Applications of thin films and micro parts of BMGs have been used a lot since its inception in the research of BMGs. However, Application and fabrication of BMGs are limited to make structural materials. Thin films of BMGs which is sputtered on the surface of structural materials by sputtering process is used to improve limits about application of BMGs. In order to investigate the difference of properties between designed alloys and thin films, we identified that thin films deposited on the surface that have the characteristic of the amorphous films and the composition of designed alloys. Zr-Cu (Cu=30, 35, 38, 40, 50 at.%) and Zr-Cu-Al (Al=10 at.% fixed, Cu=26, 30, 34, 38 at.%) alloys were fabricated with Zr (99.7% purity), Cu (99.997% purity), and Al (99.99% purity) as melting 5 times by arc melting method before rods 2mm in diameter was manufactured. In order to analyze GFA (Glass Forming Ability), rods were observed by Optical Microscopy and SEM and $T_g$, $T_x$, ($T_x$ is crystallization temperature and $T_g$ is the glass transition temperature) and Tm were measured by DTA and DSC. Powder was manufactured by Gas Atomizer and target was sintered using powder in large supercooled liquid region ($=T_x-T_g$) by SPS(Spark Plasma Sintering). Amorphous foil was prepared by RSP process with 5 gram alloy button. The composition of the foil and sputtered thin film was analyzed by EDS and EPMA. In the result of DSC curve, binary alloys ($Zr_{62}Cu_{38}$, $Zr_{60}Cu_{40}$, $Zr_{50}Cu_{50}$) and ternary alloys ($Zr_{64}Al_{10}Cu_{26}$, $Zr_{56}Al_{10}Cu_{34}$, $Zr_{52}Al_{10}Cu_{38}$) have $T_g$ except for $Zr_{70}Cu_{30}$ and $Zr_{60}Al_{10}Cu_{30}$. The compositions with $T_g$ made into powders. Figure shows XRD data of thin film showed similar hollow peak.