• Honam Mathematical Journal
• /
• v.42 no.3
• /
• pp.591-600
• /
• 2020

A module M is called ss-semilocal if every submodule U of M has a weak supplement V in M such that U∩V is semisimple. In this paper, we provide the basic properties of ss-semilocal modules. In particular, it is proved that, for a ring R, _RR is ss-semilocal if and only if every left R-module is ss-semilocal if and only if R is semilocal and Rad(R) ⊆ Soc(RR). We define projective ss-covers and prove the rings with the property that every (simple) module has a projective ss-cover are ss-semilocal.

• Microbiology and Biotechnology Letters
• /
• v.20 no.4
• /
• pp.483-490
• /
• 1992

In order to understand the transfer behavior of a particular gene in water environments, kanamycin resistance ($Km^r$) gene was tracked by Southern hybridization with DNA probe in its conjugal transfer. A $Km^r$ natural bacterial isolate and genetically modified microorganisms (GMMs) constructed from the isolate were used as donor for conjugal transfer of the $Km^r$ gene. The transfer frequencies of the $Km^r$ gene from GMM strains were generally 10 to 100 times higher than those from the natural isolate. The conjugants obtained from GMM strains in LB broth had more plasmids newly appeared, and particularly the conjugants in A Wand FW waters revealed more rearrangement in their plasmids as a function of conjugation time. When plasmids of the conjugants obtained in LB broth were Southern hybridized with DNA probe of the $Km^r$ gene, the $Km^r$ plasmids in the conjugants were detected at the same position of the plasmids in donor cells, in spite of the fact that the plasmids were highly rearranged in conjugant cells. But the $Km^r$ plasmids in the donor of DKI and DKC601, and DKC600 were not identified in the conjugants obtained after 50 h conjugation in AW and after 30 h in AW, respectively. The size of the $Km^r$ plasmids showing hybridization signal were a little changed in the conjugants obtained in A Wand FW waters. Therefore, the method of Southern hybridization with DNA probe was proved to be very specific and useful for tracking of particular genes in water environments.

• Applied Chemistry for Engineering
• /
• v.10 no.2
• /
• pp.190-195
• /
• 1999

The thermal pyrolysis of chlorodifluoromethane (R22) for producting tetrafluoroethylene (TFE) has been studied using the tubular reactor designed by the authors. The reaction temperature over $600{\sim}850^{\circ}C$, residence time over 0.005~0.6 sec, and steam/R22 ratio 3 to 30 were varied through experiments to analyze the effect of these variables on the conversion of R22 and selectivity for TFE. We have provided the guidelines for the optimal operation and design for the pyrolysis reactor. With increasing the dilution ratio, not only the conversion of R22 but also the selectivity for TFE increase. The optimum range of reaction temperature was $700{\sim}750^{\circ}C$ and the residence time 0.07~0.1 sec. In the kinetic study, first order rate equation was fitted well with the experimental data. This indicates that the main reaction step is a $CF_2$ generation from R22 pyrolysis. The range of activation energy for the rate constant was obtained 44.7~48 kcal/mol.

• Journal of Advanced Marine Engineering and Technology
• /
• v.30 no.2
• /
• pp.204-210
• /
• 2006

This study presents heat pump system characteristics using hydrocarbon refrigerants as alternative refrigerant for R-22 with respect to the variation of indoor load. Pure R-22 and R-290. R-600a, R-1270 were considered as working fluids The experimental apparatus was constructed to investigate the performance of heat pump using the air as a heat source. The performance were calculated based on compression shaft work. refrigeration capacity. pressure ratio, discharge temperature and COP. The experimental results show that the COP and refrigeration capacity of hydrocarbon refrigerants were higher than that of R-22. Through the above. hydrocarbon refrigerants are good alternatives in the heat pump system for R-22.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.14 no.7
• /
• pp.575-583
• /
• 2002

In this study, condensation heat transfer tests were conducted in flat aluminum multi-channel tubes using R-410A, and the results are compared with those of R-22. Two internal geometries were tested; one with a smooth inner surface and the other with micro-fins. Data are presented for the following range of variables; vapor quality (0.1~0.9), mass flux (200~600 kg/$m^2$s) and heat flux (5~15 ㎾/$m^2$). Results show that the effect of surface tension drainage on the fin surface is more pronounced for R-22 than R-410A. The smaller Weber number for R-22 may be responsible. For the smooth tube, the heat transfer coefficient of R-410A is slightly larger than that of R-22. For the micro-fin tube, however, the reverse is true. Possible reasoning is provided considering the physical properties of the refrigerants. For the smooth tube, a correlation of Akers et at. type predicts the data reasonably well. For the micro-fin tube, the Yang and Webb model was modified to correlate the present data.

• Journal of the Korean Society for Heat Treatment
• /
• v.35 no.5
• /
• pp.246-254
• /
• 2022

The high-temperature oxidation behavior of Cr-Mo steel AISI 4115 in air at different temperatures (600, 850, 950℃) for 120 min was studied by mass gain analysis, phase analysis (optical microscopy, electron probe micro-analysis, x-ray diffraction) and hardness measurement of each iron oxide-phase. The oxidation scales that formed on oxidation process consisted outer layer (Hematite), middle layer (Magnetite) and the inner layer (Chromite). In the case of 850 and 950℃, the oxidation mass gain per unit area of AISI 4115 steel increased according to the logarithmic rate as atmospheric pressure increased. Especially, It has been observed that with an increase in the atmospheric pressure at 600℃, the oxidation mass gain per unit area changed from a linear to logarithmic relationship.

• Korean Journal of Materials Research
• /
• v.6 no.8
• /
• pp.825-832
• /
• 1996

적외선 센서의 재료로 활용되고 있는 PLT박막 (두께:8000$\AA$-9000$\AA$)을 Pt/Ti/SiO2/Si와 Pt/M\ulcorner의 하부 구조상에 50$0^{\circ}C$, 55$0^{\circ}C$ 및 $600^{\circ}C$에서 스퍼터링 증착하여 결정성 및 전기적 특성을 조사하였다. $600^{\circ}C$로 in-situ 성장된 PLT박막은 Si기판을 이용한 경우 randomly oriented perovskite 결정구조를 나타내었으며, Pt/MgO 구조위에서는 c-축(00ι)방향으로 배향 성장되었다. $600^{\circ}C$에서 in-situ 성장된 PLT박막의 비유전상수($\varepsilon$r)와 유전정접(tan $\delta$)을 10kHz-100kHz의 주파수에서 측정한 결과 Pt/Ti/SiO2/Si 구조상에 증착된 박막은$\varepsilon$r=90과 tan $\delta$=0.02의 값을 Pt/MgO 구조상에 증착된 박막은 $\varepsilon$e=35와 tan$\delta$=0.01의 값을 나타내었다. 잔류분극량(2Pr)과 초전계수(${\gamma}$)는 상온부근에서 Si 기판을 이용한 경우 각각 0.6$\mu$C/$\textrm{cm}^2$.。C과 0.5x10-8C/$\textrm{cm}^2$.。C정도로 매우 작게 나타났으나 PLT/Pt/MgO 구조에서는 2Pr=5$\mu$C/$\textrm{cm}^2$, r=4x10-8C/$\textrm{cm}^2$.。C로 비교적 양호한 초전박막의 전기적 특성을 나타내었다.

• Nuclear Engineering and Technology
• /
• v.1 no.1
• /
• pp.55-66
• /
• 1969

1974년도에 가동될 고리 원자력 발전소(Westinghouse 600 MWe PWR)의 핵연료 주기비를 계산했다. 적용한 가정과 가격은 현재 핵 공학계에서 인용하는 것에 기준을 두었고, 한국이라는 국지적 조건을 참작하였다. 계산방식은 가장 적절하다고 생각되는 것을 Normal로 두어, 이 보다 좋거나 나쁜 조건을 고려하였다. 마지막으로 각 Parameter가 주어진 범위 내에서 변하는 것을 Normal과 비교하고 전비용중에서 각각이 차지하는 비율을 검토했는데 그 결과 Uranium 원광비, 성형가공비가 가장 비율이 크고, 그 다음이 이자율, Plutonium Credit, Plant Capacity Factor 등의 순이었다.

• Journal of Biosystems Engineering
• /
• v.23 no.4
• /
• pp.343-350
• /
• 1998

Spectroscopic analysis of soybean kernels were made in the wavelength range of 400 to 1100 nm to find effective discrimination factors which are required for developing an opitical soybean sorter. Soybean samples used for the test were the sound and five classes of the defective kernels such as the immature, discolored(brown and violet), damaged by insect and diseased. Effective discrimination factors to classify the soybean kernels into the sound and the defective were found to be $R_{640}$, $R_{580}$/ $R_{990}$, $R_{600}$- $R_{820}$ and ( $R_{590}$- $R_{820}$)/ $R_{990}$. with classification error of less than 4%. Mahalanobis distance was used as a criterion to select significant wavelengths involved in the discrimination factors.s.

• Journal of the Korean Vacuum Society
• /
• v.6 no.1
• /
• pp.36-43
• /
• 1997

FECAPS(ferroelectric capacitors) have been fabricated by RF magnetron sputtering deposition of 3000$\AA$ PZT thin films on the Pt/Ti/$SiO_2$/Si substrates and post-annealing with the temperature of $550^{\circ}C$~$650^{\circ}C$ for 10 sec~50 sec in a RTA system. The electrical characteristics of the fabricated capacitors showed the highest dielectric constant and remanent polarization[${\varepsilon_r(1kHz)$=690, $2P_r$(-5V~5V sweep)=22$\mu$C/$ \textrm{cm}^2$] in the samples annealed at $650^{\circ}C$ for 30 sec, while the lowest tangent loss and leakage current [$tan\delta(\ge10kHz)\le0.02, \; J_i(5V)=3\mu\textrm{A}/\textrm{cm}^2$]in the samples annealed at $600^{\circ}C$ for 30 sec.