• 설비공학논문집
• /
• 제13권5호
• /
• pp.377-387
• /
• 2001

This paper presents leakage characteristics of a scroll compressor applying alternative refrigerants of R22 such as R407c and R410a under actual operating conditions. Because leakage in a scroll compressor produce significant losses and degradation of performance, those should be clarified to design a high efficient scroll compressor with alternative refrigerants of R22. However, flank and tip leakage characteristics of a scroll compressor with alternative refrigerants are very limited in open literature. In the present study, both experimentation and modeling of the leakages in the scroll compressor were performed. As a result, it was observed that the leakages of the scroll compressor with R407c increased by 15%, and that with R410a increased by 76% as compared to the compressor applying R22 under standard load conditions due to a higher upstream pressure and a higher pressure difference between pockets.

• Bulletin of the Korean Chemical Society
• /
• 제32권2호
• /
• pp.407-410
• /
• 2011

An isolable activated ester, diethyl thiophosphoryl [(Z)-(2-aminothiazol-4-yl)-2-(methoxyimino)acetate (9a, DAMA) was prepared in high purity, which was at least stable for 7 d at $25^{\circ}C$ and 6 months at $5^{\circ}C$. Its reaction with 7-ACA (4) in the presence of tributylamine in i-PrOH provided cefotaxime (1) of high purity in good yield. Preparation of DAMA and its reaction with 7-ACA (4) to 1 was performed in one-pot manner, respectively with minimal unit operations of stirring and filtration.

• 대한기계학회논문집B
• /
• 제21권9호
• /
• pp.1207-1217
• /
• 1997

The present work experimentally investigated the effects of mass flux, heat flux, inlet quality on the heat transfer performance inside the U-bend of smooth and microfin tube using R-22 and R-407C refrigerants. The parameters were 200 and 400 kg/m$^{2}$ s for mass flux, 6 and 12 kw/m$^{2}$ for heat flux, 0.1 and 0.2 for inlet quality under the pressure of 0.65 MPa. The apparatus consisted of the test section of four straight sections and three U-bends, preheater, condenser, refrigerant pump, mass flow meter etc. The average heat transfer coefficient at the downstream straight section after U-bend was affected by U-bend due to the centrifugal force and mixing of two-phase flow in the U-bend. The average heat transfer coefficient at the U-bend was 4 ~ 33 % higher than that at the straight section. The average heat transfer coefficients were affected in the order of mass flux, heat flux and inlet quality. The average heat transfer coefficients in the microfin tube were lager by 19 ~ 49% and 33 ~ 69% than that in the smooth tube at the straight section and at the U-bend separately. The average heat transfer coefficients for R-407C were larger by 33 ~ 41% and 17 ~ 29% than that for R-22 in the smooth tube and the microfin tube separately.

• 대한수학회보
• /
• 제44권3호
• /
• pp.407-414
• /
• 2007

In [12], McCoy proved that if R is a commutative ring, then whenever g(x) is a zero-divisor in R[x], there exists a nonzero c $\in$ R such that cg(x) = 0. In this paper, first we extend this result to monoid rings. Then for a monoid M, we give some examples of M-quasi-Armendariz rings which are a generalization of quasi-Armendariz rings. Every reduced ring is M-quasi-Armendariz for any unique product monoid M and any strictly totally ordered monoid $(M,\;{\leq})$. Also $T_4(R)$ is M-quasi-Armendariz when R is reduced and M-Armendariz.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2003년도 하계학술대회 논문집
• /
• pp.248-248
• /
• 2003

• 한국재료학회지
• /
• 제12권5호
• /
• pp.407-413
• /
• 2002

Eutectic high chromium cast irons containing 17%Cr and 26%Cr were produced for this research by making each of them solidify unidirectionally. Abrasion wear test against SiC or $Al_2$O$_3$bonded paper was carried out using test pieces cut cross-sectionally at several distances from the chill face of castings. The wear resistance was evaluated in connection with the parameters such as eutectic colony size($E_w$), area fraction of boundary region of the colony($S_B$) where comparatively large massive chromium carbides are crystallized and, average diameter of chromium carbides in the boundary region($D_c$). The wear rate($R_w$), which is a gradient of straight line of wear loss versus testing time, was influenced by the type and the particle size of the abrasives. The $R_w$ value against SiC was found to be larger than that against A1$_2$O$_3$under the similar abrasive particle size. In the case of SiC, the $R_w$ value increased with an increase in the particle size. The $R_w$ value also increased as the eutectic colony size decreased, and that of the 17%Cr iron was larger than that of the 26%Cr iron at the same $E_w$ value. Both of the $S_B$ and $D_c$ values were closely related to the $R_w$ value regardless of chromium content of the specimens. The $R_w$ values of the annealed specimens were greater than those of the as-cast specimens because of softened matrix structures. As for the relationship between wear rate and macro-hardness of the specimens, the hardness resulting in the minimum wear rate was found to be at 550 HV30.

• 약학회지
• /
• 제45권4호
• /
• pp.407-412
• /
• 2001

A $Ca^{2+}$_dependent PLA$_2$activity termed rPLA$_2$, was detected in the cytosol of bovine red blood cells (RBCs). The rPLA$_2$was characterized as a similar form to Group IV cPLA$_2$, but different in several column chromatographic profiles including an anion exchange column. To examine whether this rPLA$_2$is different from the well characterized cPLA$_2$, a quinone derivative, BJ50, was developed and tested for the inhibitory effect on the two PLA$_2$enzymes. The rPLA$_2$activity was inhibited by a quinone derivative (BJ50) with ID$_{50}$ of 20 $\mu$M., but had no effect on the cPLA$_2$, suggesting that rPLA$_2$may be a novel type of cytosolic PLA$_2$in RBCs.s.s.

• Journal of Pharmaceutical Investigation
• /
• 제34권5호
• /
• pp.385-391
• /
• 2004

The purpose of the present study was to formulate the aqueous solution of $20-O-{\beta}-D-glucopyranosyl-20(S)-protopanaxadiol\;(IH-901)$, an intestinal bacterial metabolic derivative from Ginseng protopanaxadiol saponin. For this purpose, the effects of various solubilization agents such as cosolvents [ethanol, propylene glycol (PG), polyethylene glycol 300 (PEG 300), polyethylene glycol 400 (PEG 400), glycerin], surfactants $(Tween\;80,\;Cremophor^{\circledR}\;RH40,\;Cremophor^{\circledR}\;EL,\;Poloxamer\;407,\;Poloxamer\;188)$ and a complexation agent $[hydroxypropyl-{\beta}-cyclodextrin\;(HPBCD)]$, on the solubility of IH-90l in aqueous solution were evaluated. The solubility of IH-901 in water was under $1\;{\mu}g/ml\;at\;20^{\circ}C$. Cosolvents such as ethanol, PG, PEG 300, PEG 400 and glycerin did not enhance the solubility of IH-901 at the 0 - 40% concentration range. The solubility of IH-901 was significantly elevated by the addition of cosolvents over the 80% concentration range. On the other hand, tween 80, $Cremophor^{\circledR}\;EL,\;Cremophor^{\circledR}\;RH40$ and HPBCD showed enhanced effects on the solubility of IH-901. The enhanced effects of Poloxamer 407 or Poloxamer 188 on the IH-901 solubility were less pronounced compared with $Cremophor^{\circledR}\;EL\;or\;Cremophor^{\circledR}\;RH40$. As a results, $Cremophor^{\circledR}$ aqueous solution was selected as an optimum solvent system. The aqueous solutions containing 10% $Cremophor^{\circledR}\;EL$ and 7% $Cremophor^{\circledR}\;RH40$ were formulated as dosing solutions containing 5.0 mg/ml of IH-901 for its intravenous and oral administration, respectively. The formular showed physical stability after stored for 7 days at $4^{\circ}C$.

• 폴리머
• /
• 제26권2호
• /
• pp.227-236
• /
• 2002

열가역적인 polyvinylidene fluoride (PVDF)/propylene carbonate (PC) 의 매우 묽은 농도에서의 pregel 상태의 구조를 레이저 광산란법으로 조사한 결과 겔형성농도의 100배 이상 묽은 농도 조건에서도 PVDF 사슬은 낱개로 용해되어 있는 것이 아니라 많은 PVDF 사슬들이 응집된 거대한 구형 상태로 존재하며 이때의 응집체의 분산도는 상당히 낮으며 용액온도 $40^{\circ}C$에서 회전반경$R_G$ 는 232 nm, 동력학적 반경 $R_H$는 407 nm로 측정되었다. $R_H/R_G$=1.75의 커다란 비 값, 극소점을 갖는 정적 광산란 패턴 등으로부터 예측하건대 이 응집체의 구조는 core-shell 형태의 구형이며, 이때 내부 core의 반지름은 대략 215 nm, 외부 shell의 두께는 192 nm가 되며, shell 부분에서의 PVDF의 단량체 밀도는 core 부분의 단량체 밀도의 약 75% 수준에 머무르는 것으로 판명되었다.

• Journal of Pharmaceutical Investigation
• /
• 제34권5호
• /
• pp.407-411
• /
• 2004

New formulations of amlodipine maleate tablet have been investigated to enhance the stability of the drug against light and humidity. Three kinds of amlodipine maleate tablets were prepared. One is prepared by previously known formulation (formulation C), the others were by new formulations using hydrophilic polymer $(Opadry^{\circledR})$ coated granules (formulations A and B). Amlodipine maleate powder was coated with $Opadry^{\circledR}$ to produce the coated granules and it was mixed with other excipients to produce the tabletting mass of new formulations A and B. Dissolution rate of newly formulated tablets was over 80% within 10 minutes in 0.01 M HCl medium, and its dissolution pattern was similar to that of $Norvasc^{\circledR}$ tablet. After 6 months storage under accelerated conditions, residual drug contents of tested formulations (A and B) were not significantly different from formulation C, ranging from 96.2 to 100.4%. Meanwhile, dissolution amount of formulation C was significantly reduced compared to that of formulation A (p<0.05), showing formulation A was more stable than unprotected formulation C at the accelerated conditions. Results of appearance, hardness and disintegration remained unchanged during stability study. In conclusion, it showed that the new formulations had enhanced the stability characteristics and hydrophilic coating technique was an alternative and promising method to improve the stability of amlodipine maleate tablet.