• 한국전자거래학회지
• /
• 제10권1호
• /
• pp.41-60
• /
• 2005

본 논문에서는 국방CALS의 구현을 위한 표준방법론인 ID EF1/1X를 무기체계 연구개발 절차에 적용하여 연구개발 수행과정에서의 연구목표, 정보의 입력, 산출, 제약조건에 대한 정보모델링을 제시하였다. ID EF1/1X를 실행하는 프로그램인 SmartER를 이용하여 연구개발 수행기관 내부에 존재하는 모든 정보자원의 관리에 대한 요구분석을 실시하여 관리해야 할 정보를 식별한 후 TO-BE모델에 대한 정보모델링을 제시한 것이다. ID EF 적용대상인 무기체계 연구개발의 절차는 개념연구, 탐색개발, 체계개발, 그리고 시제품 제작을 거쳐 연구개발 결과 보고서 작성 단계로 구성되어 있다. 본 연구의 정보모델링 결과로 무기체계 통합데이터베이스(IWSDB)를 이용하여 정보를 공유하고 연구개발업무를 수행하는 것을 제시하였다. 무기체계 연구개발사업과 같은 대형 체계개발 사업에 대한 프로세스의 효율성을 기하기 위해서 적절한 방법론으로 알려진 IDEF에 대한 본격적인 연구가 진행되어 국방CALS를 구현하는 계기가 되었으면 한다.

• 한국재료학회지
• /
• 제14권11호
• /
• pp.821-827
• /
• 2004

Titanium oxide thin films were prepared on Si(100) substrates by R.F. magnetron reactive sputtering at $30\sim200watt$ R.F power range, and annealed at $600^{\circ}C\sim800^{\circ}C$ for 1 hour. The properties of $TiO_2$ thin films were analyzed using x-ray, ${\alpha}-step$, ellipsometer, scanning electron microscopy, and FT-IR spectrometer. Upon in-situ depositions, the initial phase of $TiO_2$ thin film showed non-crystalline phase at R.F. power $30\sim100$ watt. The crosssection of $TiO_2$ thin films were sbserved to be the columnar structure. With the increasing R.F power and annealing temperature, the grain size, crystallinity, refractive index, and void size of titanium oxides showed a tended to increase. The FT-IR transmittance spectra of titanium oxide thin films have the obsorption band of Ti-O bond, Si-O bond, Si-O-Ti bond and O-H bond. With the increase of R.F. power and annealing temperature, these films have the stronger bond structures. It is considered that such a phenomena is due to phase transition and good crystallinity

• 품질경영학회지
• /
• 제47권1호
• /
• pp.151-162
• /
• 2019

Purpose: This study is in order to secure high quality of military supplies, it is important to secure design quality in the development phase. I will review how to establish a quality assurance system in the development phase based on the author's seminar presentation contents and application example of Hanwha Systems Co., Ltd. Methods: To guarantee design quality in the development phase, in 2002, quality assurance system that is adequate for SQA(Software Quality Assurance)'s requirements of CMM(Capability Maturity Model) was conduct. In 2009, based on the CMMI(Capability Maturity Model Integration) Level 5, there has been continuous and reenforced quality assurance activities. Results: By suggesting the construction and a case study on application of R&D quality assurance, it would be helpful for companies aiming to construct or enhance quality assurance system. Conclusion: To secure high quality for military supplies, a development QA system should be established to secure quality in the development phase. In addition, Total life cycle QA system for development, mass production and operation phase should be reestablished.

• 설비공학논문집
• /
• 제7권4호
• /
• pp.589-599
• /
• 1995

The frictional pressure drop of a capillary tube flow is experimentally investigated for pure refrigerants such as R32, R125, and R134a and refrigerant mixtures such as R32/R134a(30/70 by mass percent), R32/R125(60/40), R125/R134a(30/70), and R32/R125/R134a(23/25/52). The binary interaction parameters for the calculation of viscosities of refrigerant mixtures are found based upon the data in the open literature. Several homogeneous flow models predicting the viscosity of two-phase region are compared to select the best model. Cicchitti's equation is known to be the most adequate for the prediction of the viscosity for refrigerant mixtures, which is used in the analysis of adiabatic capillary flows. A model for the prediction of the frictional pressure drop of single and two-phase flow is developed for refrigerant mixtures in this study. This model may be used to design and analyze the performance of a capillary tube in the refrigerating system.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권3호
• /
• pp.522-530
• /
• 2004

Single-phase heat transfer coefficients and pressure drops of R-718 were measured in smooth, horizontal copper tubes with inner diameters of 3.36 ㎜, 5.35 ㎜. 6.54 ㎜ and 8.12 ㎜, respectively. The experiments were conducted in the closed loop, which was driven by a magnetic gear pump. Data are presented for the following range of variables : Reynolds from 1000 to 20000. Single-phase heat transfer coefficients increased by 10∼30 % as the inner diameter of tube was reduced and it was found that a well-known previous correlation, Gnielinski's correlation was not suitable for the small diameter tubes. But the pressure drop in the small diameter tubes have been shown slightly deviations with Blauius' correlation. Based on an analogy between heat and mass transfer. the new heat transfer correlation is proposed to predict the experimental data successfully.

• 대한기계학회논문집
• /
• 제10권5호
• /
• pp.680-688
• /
• 1986

본 연구에서는 마르텐사이트-페라이트 복합조직강의 파괴인성평가법을 확립하 기 위하여 불균질의 대표적 인자인 페라이트 결정입경 및 마르텐사이트의 강도를 변화 시켜 R곡선법과 SZ법에 의해 파괴인성을 평가하고, SZ법에 의한 $J_{IC}$ 의 과대평가 정 도와 이에 대한 원인을 규명하기 위하여 균열선단의 미시파괴거동을 검토하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 C
• /
• pp.946-948
• /
• 1998

The distance relay is very important for transmission line protection. A quadrilateral zone shape is used mainly for a modern digital distance relay. The shape of quadrilateral is vendor specific. At the stage of design, the shape is determined considering all possible types of faults and diverse configurations of system. Also this type relay must be designed to avoid the operation by a sound phase at single-Phase-to-ground fault, by a sound phase at two-phase-to-ground fault. The effect of a source impedance and a load impedance is another important factor to design. In this paper, a reliable zone shape which is appropriate for the KEPCO's transmission system is provided.

• 대한화장품학회:학술대회논문집
• /
• 대한화장품학회 2003년도 IFSCC Conference Proceeding Book II
• /
• pp.357-368
• /
• 2003

II-A isotherms and phase behaviors of 'tocomide', a newly synthesized 1,3-bis(N-(2-hydroxyethyl)-tocopherol succinylamino)-2-hydroxypropane, mixed with cholesterol and linoleic acid, was studied for its monolayer miscibility and a stable delivery formulation for antioxidant applications. The monolayer of tocomide and cholesterol was formed in a homogeneously mixed state at air-water interface. The ternary mixtures with linoleic acid showed various bulk structures, including a stable and transparent solution of thermodynamically stable lamellar phase. The lamellar structure was confirmed by the X-ray diffraction (XRD) patterns and polarized microscopy such that pure tocomide formed a liquid crystal at room temperature with a lamellar periodicity of 36.7 $\AA$(2$\theta$=2.41$^{\circ}$).

• 대한전기학회논문지
• /
• 제41권8호
• /
• pp.893-901
• /
• 1992

In this paper, we propose a new resolver-to digital(R/D) conversion method, in which a bang-bang type phase comparator is employed for fast tracking. We eliminate from the R/D conversion loop the low-pass filter which is needed to reject carrier signal and noise. Instead, we employ two prefilters outside the R/D conversion loop that take the role of the low-pass filter. Thereby, we can construct a fast and accurate tracking R/D converter. Some simulation and experimental results as well as mathematical performance analysis are presented to demonstrate the superior tracking performance of our R/D converter over conventional tracking R/D converters.

• 한국재료학회지
• /
• 제23권6호
• /
• pp.329-333
• /
• 2013

The structural phase transformations of $0.7Pb(Mg_{1/3}Nb_{2/3})O_3-0.3PbTiO_3$ (PMN-0.3PT) were studied using high resolution x-ray diffraction (HRXRD) as a function of temperature and electric field. A phase transformational sequence of cubic (C)${\rightarrow}$tetragonal (T)${\rightarrow}$rhombohedral (R) phase was observed in zero-field-cooled conditions; and a $C{\rightarrow}T{\rightarrow}$monoclinic $(M_C){\rightarrow}$ monoclinic ($M_A$) phase was observed in the field-cooled conditions. The transformation of T to $M_A$ phase was realized through an intermediate $M_C$ phase. The results also represent conclusive and direct evidence of a $M_C$ to $M_A$ phase transformation in field-cooled conditions. Beginning from the zero-field-cooled condition, a $R{\rightarrow}M_A{\rightarrow}M_C{\rightarrow}T$ phase transformational sequence was found with an increasing electric field at a fixed temperature. Upon removal of the field, the $M_A$ phase was stable at room temperature. With increasing the field, the transformation temperature from T to $M_C$ and from $M_C$ to $M_A$ phase decreased, and the phase stability ranges of both T and $M_C$ phases increased. Upon removal of the field, the phase transformation from R to $M_A$ phase was irreversible, but from $M_A$ to $M_C$ was reversible, which means that $M_A$ is the dominant phase under the electric field. In the M phase region, the results confirmed that lattice parameters and tilt angles were weakly temperature dependent over the range of investigated temperatures.