• 자원환경지질
• /
• 제51권6호
• /
• pp.531-542
• /
• 2018

대나무 활성탄을 흡착제로 사용하여 우라늄으로 오염된 지하수를 정화하는 흡착 배치실험을 수행하였다. 국내에서 판매되는 두 종류의 대나무 활성탄을 사용하여 다양한 우라늄 농도를 가지는 인공오염수를 대상으로 활성탄 투입량에 따른 제거효율 변화를 측정하였다. 인공오염수의 다양한 pH, 온도, 흡착 시간 조건에서 흡착실험을 반복하여, 최적의 제거효율을 나타내는 대나무 활성탄의 적용 조건을 결정하였다. 실험 결과, 인공오염수에 대한 대나무 활성탄의 우라늄 제거효율은 70 ~ 97 %를 나타내었으며, 우라늄 농도가 0.14 mg/L인 실제 우라늄 오염지하수에 대한 제거효율도 84 %로 매우 높았다. 오염수의 온도의 경우 $10{\sim}20^{\circ}C$ 범위, pH는 5 ~ 9 범위에서 우라늄 제거효율 변화가 크지 않아, 현장에서 별도의 추가 처리 없이 오염지하수에 적용할 수 있을 것으로 판단되었다. 흡착실험 결과로부터 대표적인 흡착등온선을 도시한 결과, 우라늄에 대하여 대나무 활성탄은 Langmuir 흡착특성을 나타내었으며, A type과 C type 대나무 활성탄의 최대흡착농도($q_m:mg/g$)값은 각각 200.0 mg/g와 16.9 mg/g으로 높게 나타났다. 오염수 100 mL에 대나무 활성탄 2 g(2 wt%)을 첨가한 경우, 초기 우라늄 농도가 0.04 ~ 10.8 mg/L 범위에서 분리상수 값(separation factor: $R_L$)과 표면흡착률 값(surface coverage: ${\theta}$)이 1 이하로 낮게 유지되어, 다양한 우라늄 농도 범위를 가지는 오염지하수에 대하여 적은 양의 대나무 활성탄으로 효과적으로 정화할 수 있을 것으로 판단되었다.

• 한국자기학회지
• /
• 제7권5호
• /
• pp.225-231
• /
• 1997

유화 Spinel $Co_{0.95}$ F $e_{0.05}$C $r_{2}$ $S_{4}$에 대한 Mossbauer Spectrum을 자기적 전이온도 부근에서부터 액체 헬륨 온도까지 여러 온도 범위에 측정하였다. 사면체 자리에 놓여있는 F $e^{2+}$ 이온은 Jahn-Teller active로서의 역할을 하여 자기적 전이온도 이하에서부터 결정 구조상에 일그러짐을 유도하여 전기 4중극자를 형성하게된다. 초미세 자기장은 100 K 근방에서 최대 값을 갖고 온도가 감소할수록 급히 감소하는 현상을 보이고 있다. 전기 4중극자 상호작용과 자기 2중극자 상호작용 크기의 비 R은 자기적 전이온도에서 0의 값이었으나 온도가 내려감에 따라 증가하여 4.2 K 에서는 5.4의 값을 가지고 있다. 초미세 자기장의 방향과 최대 전기장 기울기 주축과의 각 .theta. 의 최적 값은 0이며 최대 전기장 기울기의 비 대칭성 매개변수 .eta. 는 0.25 근방임이 밝혀졌다. 이 경우의 Mossbauer spectra 컴퓨터 모사는 실험결과와 잘 일치하고 있다....

• 센서학회지
• /
• 제25권1호
• /
• pp.20-26
• /
• 2016

The bioelectrical impedance (BI) for the young and the elderly was measured using bioelectrical impedance spectroscopy (BIS). First, while applying a current of $600{\mu}A$ to the foot and hand, BI was measured at 50 frequencies ranging from 5 to 1000 kHz. The BI for young subjects was considerably lower than that for old subjects since young subjects have more lean mass (hydration). The prediction marker was 0.74 for young subjects and 0.78 for old subjects. Second, a Cole-Cole diagram was obtained for young subjects and old subjects, indicating the different characteristic frequencies. At 50 kHz, the average phase angle was $7.8^{\circ}$ for young subjects whereas that was $6.1^{\circ}$ for old subjects. Third, BIVA was analyzed for young subjects and old subjects. The vector length was 210.89 [${\Omega}/m$] for young subjects and 326.12 [${\Omega}/m$] for old subjects. At 50 kHz, the resistance (R/H) and the reactance ($X_C/H$) divided by height were 208.94 [${\Omega}/m$] and 28.68 [${\Omega}/m$] for young subject, and 324.33 [${\Omega}/m$] and 34.09 [${\Omega}/m$] for old subjects.

• 전기화학회지
• /
• 제3권1호
• /
• pp.25-30
• /
• 2000

다결정 Pt/0.1 M $H_2SO_4$수성 전해질 계면에서 중간주파수 구간의 위상이동 변화와 Langmuir흡착등온식 사이의 관계를 교류임피던스 방법 즉 위상이동 방법을 이용하여 연구 조사하였다. 제안된 계면등가회로는 전해질저항($R_S$), Faraday저항$(R_F)$, 흡착유사용량$(C_\varphi)$의 등가회로 요소($C_P$)의 직렬접속으로 구성된다 지연되는 위상이동$(\varphi)$은 음전위(E) 및 주파수(f)에 따르며, $\varphi=-tan^{-1}[1/2{\pi}f(R_s+R_F)C_p]$이다. 중간주파수(6Hz)에서 위상이동 변화$(\varphi\;vs.\;E)$는 Langmuir흡착등온식$(\theta\;vs.\;E)$의 결정에 적용할 수 있는 실험적인 방법이다. 다결정 $Pt/0.1\;M\;H_2SO_4$ 전해질 계면에서 수소의 흡착평형 상수(K)와 흡착표준자유에너지$({\Delta}G_{ads})$는 각각 $1.8\times10^{-4}$와 21.4kJ/mol이며 과전위 수소흡착(OPD H)에 기인한다.

• 폴리머
• /
• 제27권3호
• /
• pp.255-264
• /
• 2003

세팔 별모양 폴리스타이렌 (PS, $M_{w}$=2.80$\times$$10^{5}$ , 2.49$\times$$10^{6}$ g/mol)의 여러 종류의 사슬 크기를 t-decalin 용액의 온도 20~7$0^{\circ}C$ 사이에서 점성도법, 레이저 광산란법을 이용하여 측정하였다. 별모양 고분자들의 팽창이 만능성을 갖기 위하여서는 그들 자신의 교란되지 않은 회전 반경 $R_{G,Br,o}$이 포함된 (N/ $R_{G,Br,o}$$^{2}$)$^{3}$2/$ au$/$\tau$$_{C}$ 파라미터가 사용될 것으로 예측하였으나, 실험 결과는 오히려 선형 폴리스타이렌 고분자의 교란되지 않은 회전 반경이 사용된 (N/ $R_{G,Br,o}$$^{2}$)$^{3}$2/$\tau$/$\tau$$_{C}$ 파라미터가 보다 우수한 만능성을 보여 주었다. 이러한 이유는 가지 효과가 $\tau$/$\tau$$_{C}$(=[(Τ-Θ$_{Tc}$ )/Θ$_{Tc}$ ]/[(Θ$_{Tc}$ -Τ$_{c}$)/ $T_{c}$])부분에서 이미 반영되어 척도 상수 N/ $R_{G,O}$$^{2}$ 부분에서는 나타나지 않는 것으로 생각되어진다. 여기서 N은 고분자 사슬을 이루고 있는 단량체의 개수, Θ$_{Tc}$ 는 고분자의 분자량이 무한대일 때의 임계 용액 온도로써의 Θ 온도를 각각 의미한다.미한다.미한다.다.

• Fibers and Polymers
• /
• 제2권3호
• /
• pp.135-140
• /
• 2001

Organic-inorganic hybrid composites consisting of poly(vinylidene fluoride) (PVDF) and SiO$_2$ were prepared through a sol-gel process and the crystallization behavior of PVDF in the presence of $SiO_2$ networks was investigated by spectroscopic, thermal and x-ray diffraction measurements. The hybrid composites obtained were relatively transparent, and brittleness increased with increasing content of tetraethoxysilane (TEOS). It was regarded from FT-lR and DSC thermal analyses that at least a certain interaction existed between PVDF molecules and the $SiO_2$ networks. X-ray diffraction measurements showed that all of the hybrid samples had a crystal structure of PVDF ${\gamma}$-phase. Fresh gel prepared from the sol-gel reaction showed a very weak x-ray diffraction peak near 2$\theta$=$21^{\circ}$ due to PVDF crystallization, and Intensity increased grade-ally with time after gelation. The crystallization behavior of PVDF was strongly affected by the amount of $SiO_2$ networks. That is, $SiO_2$ content directly influenced preference and disturbance fur crystallization. In polymer-rich hybrids, $SiO_2$ networks had a favorable effect on the extent of PVDF crystallization. In particular, the maximum portent crystallinity of PVDF occurred at the content of 3.7 wt% $SiO_2$ and was higher than that of pure PVDF. However. beyond about 10 wt% $SiO_2$, the crystallization of PVDF was strongly confined.

• 동력기계공학회지
• /
• 제9권2호
• /
• pp.33-39
• /
• 2005

Experiments are performed to study the mixed convection flow and heat transfer in an inclined parallel plates with the upper part cooled and the lower part heated uniformly. The Reynolds number ranges from $4.0{\times}10^{-3}\;to\;6.2{\times}10^{-2}$, the angle of inclination, ${\theta}$, from 0 to 45 degree from the horizontal line, and Pr of the high viscosity fluid is 909. In this paper, the PIV(Particle image velocimetry) with TLC(Thermo-sensitive liquid crystal) tracers is used for visualizing and analysis. This method allows simultaneous measurement of velocity and temperature field at a given instant of time. Quantitative data of the temperature and velocity are obtained by applying the color-image processing to a visualized image, and neural network is applied to the color-to-temperature calibration. This paper describes the methods, and presents the quantitative visualization of mixed convection. From this study, it is found that the flow pattern can be classified into three patterns which are affected by Reynolds number and the angle of inclination.

• 한국레이저가공학회지
• /
• 제17권3호
• /
• pp.19-23
• /
• 2014

To directly engrave circuit-line patterns as wide as $6{\mu}m$ in a buildup film to be used as an IC substrate, we applied a projection ablation technique in which an 8 inch dielectric ($ZrO_2/SiO_2$) mask, a DPSS 355nm laser instead of an excimer laser, a ${\pi}$-shaper and a galvo scanner are used. With the ${\pi}$-shaper and a square aperture, the Gaussian beam from the laser is shaped into a square flap-top beam. The galvo scanner before the $f-{\theta}$ lens moves the flat-top beam ($115{\mu}m{\times}105{\mu}m$) across the 8 inch dielectric mask whose patterned area is $120mm{\times}120mm$. Based on the results of the previous research by the authors, the projection ratio was set at 3:1. Experiments showed that the average width and depth of the engraved patterns are $5.41{\mu}m$ and $7.30{\mu}m$, respectively.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.836-839
• /
• 2005

The in-plane vibration response of a clamped circular plate should be predicted in many applications. Up to now, papers on the in-plane vibration of rectangular plate are published. However, analytical derivation on the in-plane vibration of the clamped circular plate is not carried out. Therefore, the in-plane vibration of the clamped circular plate is the concern of this paper. In order to derive the equations of motion for the clamped circular plate in the cylindrical coordinate, the kinetic energy and potential energy for the in-plane behavior are obtained by us ing the stress-strain-displacement expressions. Application of Hamilton's principle leads to two sets of differential equations. These displacement equations were highly coupled. It is possible to obtain a simpler set of equations by introducing Helmholtz decomposition. Substituting them into the coupled differential equations, we obtain the uncoupled equations of motion. In order to solve them, we assume that the solutions are harmonic. Then, they lead to the wave equations. Using the separation of variable, we obtain the general solutions for the equations. Based on the solutions, the displacements for r and $\theta$ direction are assumed. Finally we obtain the frequency equation for the clamped circular plate by the application of boundary conditions. The derived equation is compared with the finite element analysis for validation by using the some numerical examples.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2000년도 추계학술대회 논문집
• /
• pp.33-36
• /
• 2000

The dynamic recrystallization (DRX) of medium carbon steels (SCM 440 and POSMA45) was studied with torsion test in the temperature range of $900-1100^{\circ}C$ and the strain rate range of $5.0x10^{-2}\;-\;5.0x10^0/sec$. To establish the quantitative equations for DRX, the evolution of flow stress curve with strain was analyzed. The critical strain (${\varepsilon}_c$) and strain for maximum softening rate ( ${\varepsilon}^{*}$) could be confirmed by the analysis of work hardening rate ($d{\sigma}/d{\varepsilon}\;=\; \theta$). The volume fraction of dynamic recrystallization ($X_{DRX}$) as a function of processing variables, such as strain rate ( $\dot{\varepsilon}$ ), temperature (T), and strain ( $\varepsilon$ ) were established using the ${\varepsilon}_c$ and ${\varepsilon}^{*}$. For the exact prediction, the ${\varepsilon}_c$, ${\varepsilon}^{*}$ and Avrami' exponent (m') were quantitatively expressed by dimensionless parameter, Z/A respectively. The transformation-effective strain-temperature curve for DRX could be composed. It was found that the calculated results were agreed with the experimental data for the steels at any deformation conditions.