최근 국방부는 4차산업혁명을 비롯한 첨단과학 기술의 급속한 발전으로 미래 전장환경이 급속도로 변화하고 있는 현실에서 병역자원 감소와 복무기간 단축 등의 사회적 문제에 대해 능동적으로 대응하고, 인간 중심의 가치문화를 정립하기 위해 노력하고 있다. 이에 대한 일환으로 국방부는 국방개혁과 연계하여 육군의 역할을 재정립하고, 육군의 전투력을 극대화하기 위해 차세대 개인전투체계인 워리어플랫폼 도입을 추진하고 있다. 본 논문에서는 미래지상작전 양상 및 개념을 살펴보고, 해외 개인전투체계에 대한 사례분석을 통해 한국군에 적합한 최적의 워리어플랫폼 아키텍처를 제시한다. 이를 위해 개인 전투원에게 요구되는 필수 요구능력과 부대유형별 요구능력에 대해 분석하고, 워리어플랫폼 단계별 통합 및 연동방안을 구체적으로 제시하며, 통합 및 연동이 필요한 장비들간의 데이터 흐름 및 전원연결 구성도를 제시함으로써 효율적인 사업 추진 방향을 제안한다.
The quality of meat is highly variable in many properties. This variability originates from both animal production and meat processing. At the pre-slaughter stage, animal factors such as breed, sex, age contribute to this variability. Environmental factors include feeding, rearing, transport and conditions just before slaughter (Hildrum et al., 1995). Meat can be presented in a variety of forms, each offering different opportunities for adulteration and contamination. This has imposed great pressure on the food manufacturing industry to guarantee the safety of meat. Tissue and muscle speciation of flesh foods, as well as speciation of animal derived by-products fed to all classes of domestic animals, are now perhaps the most important uncertainty which the food industry must resolve to allay consumer concern. Recently, there is a demand for rapid and low cost methods of direct quality measurements in both food and food ingredients (including high performance liquid chromatography (HPLC), thin layer chromatography (TLC), enzymatic and inmunological tests (e.g. ELISA test) and physical tests) to establish their authenticity and hence guarantee the quality of products manufactured for consumers (Holland et al., 1998). The use of Near Infrared Reflectance Spectroscopy (NIRS) for the rapid, precise and non-destructive analysis of a wide range of organic materials has been comprehensively documented (Osborne et at., 1993). Most of the established methods have involved the development of NIRS calibrations for the quantitative prediction of composition in meat (Ben-Gera and Norris, 1968; Lanza, 1983; Clark and Short, 1994). This was a rational strategy to pursue during the initial stages of its application, given the type of equipment available, the state of development of the emerging discipline of chemometrics and the overwhelming commercial interest in solving such problems (Downey, 1994). One of the advantages of NIRS technology is not only to assess chemical structures through the analysis of the molecular bonds in the near infrared spectrum, but also to build an optical model characteristic of the sample which behaves like the “finger print” of the sample. This opens the possibility of using spectra to determine complex attributes of organic structures, which are related to molecular chromophores, organoleptic scores and sensory characteristics (Hildrum et al., 1994, 1995; Park et al., 1998). In addition, the application of statistical packages like principal component or discriminant analysis provides the possibility to understand the optical properties of the sample and make a classification without the chemical information. The objectives of this present work were: (1) to examine two methods of sample presentation to the instrument (intact and minced) and (2) to explore the use of principal component analysis (PCA) and Soft Independent Modelling of class Analogy (SIMCA) to classify muscles by quality attributes. Seventy-eight (n: 78) beef muscles (m. longissimus dorsi) from Hereford breed of cattle were used. The samples were scanned in a NIRS monochromator instrument (NIR Systems 6500, Silver Spring, MD, USA) in reflectance mode (log 1/R). Both intact and minced presentation to the instrument were explored. Qualitative analysis of optical information through PCA and SIMCA analysis showed differences in muscles resulting from two different feeding systems.
최신의 무기체계 및 전자장비들은 아군의 생존성 향상을 위해 스텔스 기술에 대한 요구가 증가하고 있기 때문에, 레이다 반사 면적을 줄이는 저피탐 기술 구현이 필요하다. 이러한 스텔스 기술을 위해 형상 설계나 전파 흡수체를 적용한 저피탐 특성 구현 방법이 널리 사용되는데, 능동위상배열 안테나는 형상 설계에 구조적인 한계가 있고 전파 흡수체 적용 시 안테나의 전기적 성능이 저하되는 단점이 있다. 따라서 본 논문에서는 X-대역에서 동작하는 능동위상배열 안테나의 저피탐 특성 구현을 위해 전파 흡수체를 적용하기에 적합한 개별 복사소자를 선정하고, 13x13 배열 안테나를 설계 및 제작하였다. 다음으로 제작된 안테나의 흡수체 유무 및 종류에 따른 상대 RCS와 전기적 성능 측정 결과 비교를 통해 저피탐 특성은 확보하면서 전기적 성능은 동등 이상의 수준으로 유지됨을 보임으로써, 본 논문에서 제안한 저피탐 특성 구현 방법이 유효함을 보이고 전파 흡수체 적용 시 안테나 성능이 저하되는 한계를 극복할 수 있음을 확인하였다.
Objectives: We investigated the effects of Allii Fistulosi Bulbus (AFB) on high fat diet (HFD)-induced obesity in mice and the regulation of energy metabolism in muscle tissues of mice. Methods: The C57BL/6 mice (6 weeks, male) were fed a HFD for 8 weeks and then administrated with AFB extract at 500 mg/kg (p.o.) once daily for 4 weeks. The body weight (BW), muscle weight, calorie intake, fasting blood glucose (FBG) and serum glucose, insulin, and low-density lipoprotein-cholesterol (LDL-C) levels were measured in mice. It was also observed the histological changes of pancreas, liver, and fat tissues with hematoxylin and eosin staining. It was investigated the phosphorylation of insulin receptor substrate 1 (IRS-1), Ser/Thr kinase (AKT), and adenosine monophosphate-activated protein kinase (AMPK), and the expression of phosphoinositide 3-kinase, glucose transporter type 4 (GLUT4), and sirtuin1 (Sirt1) in gastrocnemius tissues by western blot, respectively. Results: The increases of BWs, calorie intakes and FBG levels in obesity mice were decreased significantly by the administration of AFB extract. The AFB extract administration was reduced significantly serum levels of glucose, insulin, and LDL-C in obesity mice. The AFB extract inhibited lipid accumulation in liver tissues, hyperplasia of pancreatic islets, and enlargement of fat tissues in obesity mice. The phosphorylation of IRS-1 and AKT was increased significantly in muscle tissues and AMPK phosphorylation and the GLUT4 and Sirt1 expression were decreased significantly in muscle tissues after the AFB administration. Conclusions: Our study indicates that AFB extract improves symptoms of obesity through regulation of energy regulating proteins in muscle tissues.
음원의 음량, 방향 및 음원까지의 거리와 같은 음원의 특성을 인식하는 것은 자율주행차, 로봇 시스템, AI 스피커 등 무인 시스템에서 중요한 기술 중의 하나이다. 음원의 방향이나 거리를 인식하는 방법은 레이다, 라이더, 초음파 및 고주파와 소리를 이용하는 방법이 있다. 그러나 이러한 방법은 신호를 발신하여야 하며, 장애물에 의한 비가시 영역에서 발생하는 음원은 정확하게 인식할 수 없다. 본 논문에서는 비가시 영역을 포함한 주변에서 발생하는 음원의 음량, 방향 및 음원까지의 거리를 인식하는 방법으로 가청 주파수 대역의 소리를 검출하여 인식하는 방법을 구현하고 평가하였다. 음원을 인식하기 위하여 주로 사용하는 교차형 기반의 음원인식 알고리즘은 음원의 음량과 방향을 인식할 수 있으나 사각영역이 발생하는 문제가 있다. 뿐만아니라 이 알고리즘은 음원까지의 거리를 인식할 수 없다는 제약이 있다. 이러한 기존 방법의 한계를 탈피하기 위하여, 본 논문에서는 교차형 기반의 알고리즘보다 더 발전된 직사각형 기법을 사용한 QRAS 기반의 알고리즘으로 음원의 음량, 방향 및 음원까지의 거리를 인식하여 음원의 특성을 파악할 수 있는 음원인식 알고리즘을 제안한다. 전방향 음원인식을 위한 QRAS 기반의 알고리즘은 직사각형으로 배치된 4개의 음향센서에 의하여 도출되는 6쌍의 음향 도착 시간차를 사용한다. QRAS 기반의 알고리즘은 기존 교차형 기반의 알고리즘으로 음원을 인식할 때 발생하는 사각영역과 같은 문제점을 해결할 수 있으며, 음원까지의 거리도 인식할 수 있다. 실험을 통하여 제안된 전방향 음원 인식을 위한 QRAS 기반의 알고리즘은 사각영역없이 음원의 음량, 방향 및 음원까지의 거리를 인식할 수 있음을 확인하였다.
The purpose of this study was to identify the differences of cognitive responses, emotional responses, customer satisfaction, and service loyalty about service encounter quality by types of restaurants and to analyse emotional responses, customer satisfaction, and service loyalty in accordance with level of service encounter quality. The questionnaire were collected from customers (N=812) who had used restaurants in Seoul, aiming at 15 or more-year-old customers from October 24, 2005 to November 6, 2005. The main results of this study were as follows: Statistically significant difference was showed in importance and performance of interaction quality, importance and performance of physical environment quality, performance of outcome quality depending on types of restaurants, while significant difference was not indicated in importance of outcome quality by types of restaurants. Positive emotional response was significantly high by types of restaurants in order of fine-dining restaurants, family restaurants, and fast-food restaurants, while negative emotional responses were significantly higher in fast-food restaurants than in the other two types. As far as Customer satisfaction are concerned, fine-dining restaurants showed higher customer satisfaction than the other two types. Attitudinal service loyalty was high in fine-dining restaurants, family restaurants and fast-food restaurants in order and behavioral loyalty was not significantly different with each type of restaurant. In accordance with level of service encounter quality, cluster analysis was conducted and the clusters were divided into 'high-valuation' and 'low-valuation'. 'High-valuation cluster' and 'low-valuation cluster' showed significant difference depending on types of restaurants that customers used(p<.001). The customers who used fine-dining restaurants and family restaurants valued the performance of service encounter highly. However, in fast-food restaurants, a lot of low-valuation customers existed. Therefore, fast-food restaurants have to improve performance of interaction quality, outcome quality and physical environment quality in service encounter. In addition, in 'high-valuation cluster' who valued service encounter quality highly showed higher scores in positive responses, customer satisfaction, service loyalty than in 'low-valuation cluster', and showed low negative responses.
Energy harvesting technology that converts the wasted energy resources into electrical energy is emerging as a semipermanent power source for self-powered electronics and wireless low-power sensor systems. Among the various energy conversion techniques, flexible piezoelectric energy harvesters (f-PEHs), using materials with piezoelectric effects, have attracted significant interest because they can harvest a small mechanical energy into electrical signals without constraints of time and space in various environments. In this study, we used a flexible piezoelectric composite film fabricated by dispersing BaHfxTi(1-x)O3 (x = 0, 0.01, 0.05, 0.1) piezoelectric powders inside a polymeric matrix to facilitate f-PEHs. The fabricated f-PEH with optimal Hf contents (x = 0.05) generated a maximum output voltage of 0.95 V and current signal of 130 nA with stable electrical/mechanical disabilities under periodically bending deformations. In addition, we demonstrated a cantilever-type f-PEH and investigated its potential as a sensor by characterizing the output performance under mechanical vibrations at various frequencies. This study provides the breakthrough for realizing self-powered energy harvesting and sensing systems by adopting the lead-free piezoelectric composites under vibrational environments.
본 연구는 모세관 혈당의 혈당값을 대조군으로 연구 참가자의 혈액 포도당을 모니티링할 때 PPG 센서와 DNN 예측알고리즘이 융합된 혈당모니터링 시스템(PPG-BGMS)의 성능을 평가하는 것이다. 연구는 2023년 9월부터 2023년 11월까지 참가자를 대상으로 실시된 연구자 임상시험이다. PPG-BGMS는 1분간의 심박수, 심박변이도 정보와 DNN 예측알고리즘을 활용한 예측된 혈당수치와 개인용혈당관리시스템의 혈당측정기로 측정한 모세관혈당 수치와 비교했다. 총 100명의 참가자 중 제2형 당뇨(T2DM) 유병인은 50명이며, 평균연령은 67세(28세~89세)이다. PPG-BGMS의 예측혈당의 100%가 Clarke 오류그리드 및 Parker(Consensus) 오류그리드의 A+B 영역에 분포하는 것으로 나타났다. PPG-BGMS 예측 혈당의 MARD 값은 5.3 ± 4.0 %이다. 결과에 의하면 비채혈식 PPG-BGMS는 임상표준의 채혈식 개인용 혈당측정시스템의 순간 혈당수치와 비교하여 열등하지 않는 것으로 분석되었다.
본 연구는 기술력 평가항목 중 기업의 재무안정성과 관련된 항목을 신용평가모형에 반영하여 중소기업뿐만이 아닌 전체 기업을 대상으로 한 신용평가모형의 부도변별력을 높이기 위한 기술력 평가모형의 신용평가모형 내 내재화에 착안하여 시작되었다. 따라서 기술력 평가모형이 부채비율 기준의 고안정성 중소기업을 사전에 판별하는 데 적용될 수 있는지 검증하는 것을 목표로 한다. 대상 기업을 업종(제조업 vs. 비(非)제조업)과 업력(창업기업 vs. 비(非)창업기업)으로 구분하고, 3개년 동안 해당 군집의 평균 부채비율 1/2 이하를 달성한 기업에 대해 고안정성 중소기업으로 정의한 후, C5.0 기법을 적용하여 모형의 판별력을 검증하였다. 분석결과 소항목 수준에서는 업종과 업력에 따라 중요도 간 차이가 있지만, 중항목 수준에서는 기술개발역량이 고안정성 중소기업을 판별하는 중요변수로 도출되었으며, 기업의 업력에 따라 창업 초기에는 자금조달능력(수익창출능력을 고려한 자본구조, 자본비용 및 자금조달 방법의 다양성)이 미래 고안정성 중소기업 여부를 결정하는 중요변수이지만, 업력이 증가함에 따라 지속적인 성과를 가능하게 하는 기술개발 인프라가 재무안정성에 영향을 미치는 중요 변수로 변화한다는 결론을 도출하였다. 업종과 업력에 따른 모형의 분류 정확도는 71~91% 수준이며, 기술력 평가항목을 이용하여 고안정성 중소기업을 판별할 수 있다는 가능성을 확인하였다.
Amy Chen;Shannon R. Garvey;Nimish Saxena;Valeria P. Bustos;Emmeline Jia;Monica Morgenstern;Asha D. Nanda;Arriyan S. Dowlatshahi;Ryan P. Cauley
Archives of Plastic Surgery
/
제51권2호
/
pp.234-250
/
2024
Background The impact of diabetes on complication rates following free flap (FF), pedicled flap (PF), and amputation (AMP) procedures on the lower extremity (LE) is examined. Methods Patients who underwent LE PF, FF, and AMP procedures were identified from the 2010 to 2020 American College of Surgeons National Surgical Quality Improvement Program (ACS-NSQIP®) database using Current Procedural Terminology and International Classification of Diseases-9/10 codes, excluding cases for non-LE pathologies. The cohort was divided into diabetics and nondiabetics. Univariate and adjusted multivariable logistic regression analyses were performed. Results Among 38,998 patients undergoing LE procedures, 58% were diabetic. Among diabetics, 95% underwent AMP, 5% underwent PF, and <1% underwent FF. Across all procedure types, noninsulin-dependent (NIDDM) and insulin-dependent diabetes mellitus (IDDM) were associated with significantly greater all-cause complication rates compared with absence of diabetes, and IDDM was generally higher risk than NIDDM. Among diabetics, complication rates were not significantly different across procedure types (IDDM: p = 0.5969; NIDDM: p = 0.1902). On adjusted subgroup analysis by diabetic status, flap procedures were not associated with higher odds of complications compared with amputation for IDDM and NIDDM patients. Length of stay > 30 days was statistically associated with IDDM, particularly those undergoing FF (AMP: 5%, PF: 7%, FF: 14%, p = 0.0004). Conclusion Our study highlights the importance of preoperative diabetic optimization prior to LE procedures. For diabetic patients, there were few significant differences in complication rates across procedure type, suggesting that diabetic patients are not at higher risk of complications when attempting limb salvage instead of amputation.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.