• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1995.04a
• /
• pp.375-375
• /
• 1995

• Journal of IKEEE
• /
• v.28 no.1
• /
• pp.33-37
• /
• 2024

In this paper, we report the design and the measurement of a X-band low noise amplifier (LNA) monolithic microwave integrated circuit (MMIC) using a 0.25 ㎛ gate length microstrip GaN-on-SiC high electron mobility transistor (HEMT) technology. The developed X-band GaN-based LNA MMIC achieves small signal gain of 22.75 dB ~ 25.14 dB and noise figure of 1.84 dB ~ 1.94 dB in the desired band of 9 GHz to 10 GHz. Input and output return loss values are -11.36 dB ~ -24.49 dB and -11.11 dB ~ -17.68 dB, respectively. The LNA MMIC can withstand 40 dBm (10 W) input power without performance degradation. The chip dimensions are 3.67 mm × 1.15 mm. The developed GaN-based LNA MMIC is applicable to various X-band applications.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.1
• /
• pp.149-155
• /
• 2015

This paper proposes 5-MS/s 10-bit digital-to-analog converter(DAC) with the improved linearity. The proposed DAC consists of a 10-bit R-2R-based DAC, an output buffer using a differential voltage amplifier with rail-to-rail input range, and a band-gap reference circuit for the bias voltage. The linearity of the 10-bit R-2R DAC is improved as the resistor of 2R is implemented by including the turn-on resistance of an inverter for a switch. The output voltage range of the DAC is determined to be $2/3{\times}VDD$ from an rail-to-rail output voltage range of the R-2R DAC using a differential voltage amplifier in the output buffer. The proposed DAC is implemented using a 1-poly 8-metal 130nm CMOS process with 1.2-V supply. The measured dynamic performance of the implemented DAC are the ENOB of 9.4 bit, SNDR of 58 dB, and SFDR of 63 dBc. The measured DNL and INL are less than +/-0.35 LSB. The area and power consumption of DAC are $642.9{\times}366.6{\mu}m^2$ and 2.95 mW, respectively.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.255-260
• /
• 2007

The construction industry has been recognized as lagging behind other industries in the area of research and development (R&D) due primarily to the lack of R&D funds. To overcome this situation, the Korea Ministry of Construction and Transportation has a plan to expand its investments on the construction R&D up to 1.72 billion US dollars over the next 3 years. Despite this effort, it is still challenging to conduct the quantitative measurement on the efficiency of construction R&D projects, which can be utilized as the objective basis in the reasonable selection of a promising R&D team or in the consequential evaluation of a R&D performance. This study aims to conduct the efficiency analysis on the construction R&D projects to provide the basis for evaluating the performance of research and development. Toward this end, this study performs an efficiency analysis, which reflects all of the input and output data into/from the construction R&D by utilizing the Data Envelopment Analysis (DEA). The proposed methodology can be utilized to make a better decision on the priority of the R&D investments and present a sound basis to suggest the areas to be improved so as to reduce the inefficiency of R&D projects.

• Proceedings of the Technology Innovation Conference
• /
• 1997.07a
• /
• pp.247-265
• /
• 1997

The objectives of not-for-profit organizations including government supported research institutes are, by definition, to achieve socially desired nonfinancial goals. Current reporting focuses on providing information to meet the needs of users. This information may be provided in the annual research report, financial report, and other reports. An objective of current reporting is to provide users with information that will assist them in evaluating the performance(efficiency and effectiveness) of reporting entity. The evaluation of R&D project's performance requires information not only about the acquition and use of resources, but also about the outputs and outcomes of R&D activities, This study aims to recommend that R&D Service Efforts and Accomplish- mints(SEA) reporting is useful for performance evaluation in national R&D programmes. To achieve this aims, I attempt to develop the R&D SEA measures with reference to the Concepts Statement No. 2 of the Governmental Accounting Standards Board. R&D SEA measures consist of five categories : (1) input measures, (2) outcome measures, (3) output measures, (4) re1a1e efforts to accomplishments, (5) explanatory information.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.11C
• /
• pp.963-969
• /
• 2008

This paper presents 6bit 100MHz Interpolation Flash Analog-to-Digital Converter, which can be applied to the Receiver of Wireless Tele-communication System. The 6bit 100MHz Flash Analog-to-Digital Converter simplifies and integrates S-R latch which multiplies as the resolution increases. Whereas the conventional NAND based S-R latch needed eight MOS transistors, this Converter was designed with only six, which makes the Dynamic Power Dissipation of the A/D Converter reduced up to 12.5%. The designed A/D Converter went through $0.18{\mu}m$ CMOS n-well 1-poly 6-metal process to be a final product, and the final product has shown 282mW of power dissipation with 1.8V of Supply Voltage, 100MHz of conversion rate. And 35.027dBc, 31.253dB SFDR and 4.8bits, 4.2bits ENOB with 12.5MHz, 50MHz of each input frequency.

• Industrial Engineering and Management Systems
• /
• v.14 no.1
• /
• pp.58-72
• /
• 2015

A primary concern of national R&D plans is to encourage technological development in private firms and research institutes. For effective R&D planning and program support, it is necessary to assess technological impacts that may exist both directly and indirectly among technology areas within the whole technology system; however, previous studies analyze only direct impacts among technologies, failing to capture both direct and indirect impacts. Therefore, this study proposes an approach based on decision-making trial and evaluation laboratory (DEMATEL) to identifying specific characteristics of technology areas, such as technological impact and degree of cause or effect (DCE). The method employs patent co-classification analysis to construct a technological knowledge flow matrix. Next, to capture both direct and indirect effects among technology areas, it incorporates the modified DEMATEL process into patent analysis. The method helps analysts assess the technological impact and DCE of technology areas, and observe their evolving trajectories over time, thereby identifying relevant technological implications. This study presents a case study using Korean patents registered during 2003-2012. We expect our analysis results to be helpful input for R&D planning, as well as the suggested approach to be incorporated into processes for formulating national R&D plans.

• Journal of the Korean Society of Systems Engineering
• /
• v.16 no.1
• /
• pp.1-8
• /
• 2020

In this paper we proposed to develop the reliability growth planning for the One-shot system using the PM2-Discrete model. The PM2-Discrete is the methodology specifically developed for discrete systems and is the first quantitative method available for formulating detailed plans in the discrete usage domain. First, the parameters RG, RI, T, MS and d of the PM2-Discrete model are set. Second, the case analysis was performed on One-shot system A. Third, the input parameter values were applied to drive the R(t) equation. Finally, using RGA 11 Software, the reliability Growth Planning Curve of One-shot system A was constructed. Also, the sensitivity analyses are performed for the changes of model parameters. The results of this study can be usefully used in establishing the reliability growth planning curve of the One-shot system.

• Journal of Energy Engineering
• /
• v.2 no.1
• /
• pp.45-53
• /
• 1993

This study was directed to an inquiry into a methodology for prioritizing and evaluating R & D alternatives for fuel cell technology, that can provide information for use in future decisions under the current uncertainty. A case study was performed for three cases of fuel cell development under the assumption that basic input data are same. The three cases are the case considering sequential R & D schedule only(Case 1), the case considering equivalent and excluding subprojects(Case 2), and the case allowing parallel efforts for each phase(Case 3). The following results were obtained; the probabilities of success for R & D phases in parallel projects are correlated, the probability of success for each project increases through Case 1, Case 2 and Case 3 successively and the expected dates of commercialization were notably shortened in Case 3.

• Journal of the Economic Geographical Society of Korea
• /
• v.13 no.1
• /
• pp.147-158
• /
• 2010

Knowledge spillover among firms is a crucial ingredient in realizing the benefits of agglomeration. This paper provides an overview and critical assessment of the Shihwa Industrial Complex (SIC) in Korea. In order to identify the relationships and interplay among different agents in the area, a survey was conducted on business networking of industry-academia-government collaboration in research and development. Unlike the closely knit input-output relationship, the findings suggest that the technological linkages in the SIC still have room for improvement. As the role of small and medium enterprises as catalysts of regional economic development in Korea is expected to grow in importance, more effort should be made to nurture clustering and R&D networking among them.