• Journal of the Semiconductor & Display Technology
• /
• v.22 no.3
• /
• pp.119-124
• /
• 2023

In this study, experimental approach of the measurement of condensation and evaporation heat transfer coefficients is discussed for mixed refrigerants using in the ultra low-temperature cooling system for semiconductor etching process. An experimental apparatus was described performing the condensation and evaporation heat transfer measurements for mixed refrigerants. The mixed refrigerant used in this study was composed of the optimal mixture determined in previous research, with a composition of Ar:R14:R23:R218 = 0.15:0.4:0.15:0.3. The experiments were conducted over a temperature range from -82℃ to 15℃ and at pressures ranging from 18.5 bar to 5 bar. The convection heat transfer coefficients of the mixed refrigerant were measured at flow rates corresponding to actual operating conditions. The condensation heat transfer coefficient ranged from approximately 0.7 to 0.9 kW/m2K, while the evaporation heat transfer coefficient ranged from 1.0 to 1.7 kW/m2K. The detailed discussion of the experimental methods, procedures, and results were described in this paper.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.18 no.3
• /
• pp.254-261
• /
• 2006

The effect of enhanced geometry (pore diameter, gap width) is investigated on the pool boiling of R-123/oil mixture for the enhanced tubes having pores with connecting gaps. Tubes with different pore diameters (and corresponding gap widths) are specially made. Significant heat transfer degradation by oil is observed for the present enhanced tubes. At 5% oil concentration, the degradation is 26 to 49% for $T_{sat}=4.4^{\circ}C$. The degradation increases 50 to 67% for $T_{sat}=26.7^{\circ}C$. The heat transfer degradation is significant even with small amount of oil (20 to 38% degradation at 1% oil concentration for $T_{sat}=4.4^{\circ}C$), probably due to the accumulation of oil in sub-tunnels. The pore size (or gap width) has a significant effect on the heat transfer degradation. The maximum degradation is observed for $d_p$ = 0.20 mm tube at $T_{sat}=4.4^{\circ}C$, and for $d_p$=0.23 mm tube at $T_{sat}=26.7^{\circ}C$. The minimum degradation is observed for $d_p$=0.27 mm tube for both saturation temperatures. It appears that the oil removal is facilitated for the larger pore diameter (along with larger gap) tube. The highest heat transfer coefficient with oil is obtained for $d_p$ =0.23 mm tube, which yielded the highest heat transfer coefficient for pure R-123. The heat transfer degradation increases as the heat flux decreases.

• Journal of Microbiology and Biotechnology
• /
• v.15 no.2
• /
• pp.376-383
• /
• 2005

Alcaligenes sp. JMP228 carrying 2,4­dichlorophenoxyacetic acid (2,4-D) degradative plasmid pJP4 was inoculated into natural soil, and transfer of the plasmid pJP4 to indigenous soil bacteria was investigated with and without 2,4-D amendment. Plasmid pJP4 transfer was enhanced in the soils treated with 2,4-D, compared to the soils not amended with 2,4-D. Several different transconjugants were isolated from the soils treated with 2,4-D, while no indigenous transconjugants were obtained from the unamended soils. Inoculation of the soils with both the donor Alcaligenes sp. JMP228/pJP4 and a recipient Burkholderia cepacia DBO 1 produced less diverse transconjugants than the soils inoculated with the donor alone. Repetitive extragenic palindromic-polymerase chain reaction (REP-PCR) analysis of the transconjugants exhibited seven distinct genomic DNA fingerprints. Analysis of 16S rDNA sequences indicated that the transconjugants were related to members of the genera Burkholderia and Pandoraea. Denaturing gradient gel electrophoresis (DGGE) analysis of PCR-amplified 16S rRNA genes revealed that inoculation of the donor caused clear changes in the bacterial community structure of the 2,4-D­amended soils. The new 16S rRNA gene bands in the DGGE profile corresponded with the 16S rRNA genes of 2,4-D­degrading transconjugants isolated from the soil. The results indicate that introduction of the 2,4-D degradative plasmid as Alcaligenes sp. JMP228/pJP4 has a substantial impact on the bacterial community structure in the 2,4-D-amended soil.

• Journal of Korean Institute of Industrial Engineers
• /
• v.28 no.2
• /
• pp.201-215
• /
• 2002

In this paper, we use a structural equation model to diagnose success factors on commercialization of information and communication technology considering the characteristics of commercialization process in terms of the type of technology, technology provider and technology receiver. The results of our study indicated the following. The transferor's research ability has significant effects on the commercialization by small businesses with low R&D expenditure to sales ratio, and the business management ability plays an important role in the commercialization by the relatively large (over 100 employees) companies with low R&D expenditure ratio. During the commercialization of the technology independently researched by government run institute or university, the transferee's business management ability is crucial to success. To those companies which run the existing business with high R&D expenditure ratio, their ability to utilize technology is essential. When the independently researched technology is used in the new business, the companies' business management ability and the role of technology transfer center are the important factors on the commercialization. Based on these findings, we suggest some strategies to effectively promote R&D efforts for successful commercialization.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.517-520
• /
• 2003

The purpose of this paper is to investigate the effect of arc current and contact velocity on the erosion of silver contact to be used in low voltage circuit breakers. The arc current range from $2kA_{rms}$ to $20kA_{rms}$. A test system allows the control of the opening velocity profiles with contact velocities up to 10m/s and also enables the synchronization of the contact opening with a point on the arc current waveform. Contact erosion is evaluated by measuring the mass change of the cathode and anode. The results show that increase the opening velocity from 2m/s to 6m/s leads to an decrease in the contact erosion. The material transfer from one electrode to another is shown to depend on the transfer charge and the opening velocity of the contacts.

• Journal of Korean Society for Quality Management
• /
• v.44 no.4
• /
• pp.785-798
• /
• 2016

Purpose: This paper developed the framework for extracting strategies of research and business development (R&BD) based on the data envelopment analysis(DEA). Methods: DEA has been widely utilized in evaluating R&D efficiency. Even though, technology transfer and commercialization has been regarded as the important factors for practical R&D efficiency evaluation, most research have evaluated R&D efficiency by just using the DEA outputs such as the number of patents and papers. The technology transfer, commercialization and relations among costs and generated technology and commercialization are needed to be considered for more practical R&D efficiency evaluation. Thus, this research addressed a method on how to incorporate the commercialization factors into the R&DB efficiency evaluation, and improve the efficiency strategically in terms of R&D and B&D. To achieve this, this research utilized a two-stage network DEA model for R&BD efficiency evaluation. Results: The proposed framework was applied to the 15 public research institutes and the 34 universities for validation. R&BD efficiency for the 15 public research institutes and the 34 universities was evaluated, and the differentiated improvement strategies for the inefficient DMUs to improve their efficient were proposed. Conclusion: The R&BD efficiency would be effectively analyzed based on two-stage network DEA. It would be utilized for the effective strategy planning for cultivating R&BD.

• Transactions of the Korean hydrogen and new energy society
• /
• v.25 no.4
• /
• pp.449-458
• /
• 2014

The heat transfer phenomenon was investigated in this study when a single round water jet with the low velocity and against the direction of gravity flows to the downward facing Isothermal of definite thickness circular plate. Experimental investigation is performed for a single round jet diameter 4mm, 6mm, and 8mm with the jet velocity 2.4m/s and jet fluid temperature of $24^{\circ}C$, varied the ratio of nozzle clearance/nozzle diameter (H/D)1, 2, 3, 6, and 8, on circular plate isothermal condition with $85^{\circ}C$. The local convection heat transfer coefficient distributions are analyzed based on the visualization of jet flow field. The effects of the diameter of Nozzle, the ratio of H/D and the ratio of nozzle diameter/circular plate diameter on heat transfer phenomenon are investigated. As a results of experiment is obtained correlation equation, $Nu_r=3.18Re_r^{0.55}Pr_r^{0.4}$.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.7 no.6
• /
• pp.964-978
• /
• 2015

Numerous experiments with a scaled pilot facility were carried out to compare the relative bulk transfer performance of three special devices for applications to drilling systems. The pipe diameter for bulk transportation was 3 in., which corresponds to around half of the actual system dimensions. Two different pressures, 3 and 4 bar, were considered to check the relative performance under different pressure conditions at a bulk storage tank. And to make a practical estimation method of the bulk transfer rate at the early design stages of the bulk handling system, a series of experiments were conducted for real scaled bulk handing systems of two drilling vessels. The pressure drops at each pipe element as well as the bulk transfer rates were measured under different operating conditions. Using the measured results, the friction factor for each pipe element was calculated and a procedure for transfer rate estimation was developed. Compared to the measured transfer rate results for other drilling vessels, the estimated transfer rates were within a maximum 15% error bound.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.135-145
• /
• 2017

The purpose of this study is to present meaningful information and policy implications concerning the determinants of royalties to the government-funded research centers and agencies. These groups are responsible for policies encouraging technology transfer from the public sector to the private sector. To identify key determinants of royalties in technology transfer, this study conducted AHP survey analysis (Survey period: 01/10~31/10, 2016) of 85 companies which were participants of the R&D project "Next Generation BioGreen21" of R.D.A in the "N"center from 2011 to 2015. Research results show that the critical factors include: 1)Technical considerations for determining the profitability of the technologies, 2)The interest and willingness of the management group, 3)Necessity and urgency of technology transfer. These findings suggest three main policy implications. First, the government-funded research centers and agencies should develop technologies that help companies improve their commercialization as well as the profitability in the near future. Second, government-funded research centers and agencies should consider reducing the administrative burden of the royalty payment for private companies. Third, public R&D projects should reflect the proper research schedule for technology development on the basis of the R&D time span of companies which transfer technology.

• Journal of Korea Technology Innovation Society
• /
• v.20 no.2
• /
• pp.430-457
• /
• 2017

The purpose of this study is to present meaningful information and policy implications concerning the determinants of royalties of technology transfer to stakeholder. To identify key determinants of royalties in technology transfer, this study conducted AHP survey analysis (Survey period: 01/09~31/10, 2016) of 96 government-funded research centers and 85 companies which were participants of the R&D project "Next Generation BioGreen21" of R.D.A in the "N" center from 2011 to 2015. Research results show that both parties acknowledge 'Technical considerations for determining the profitability of the technologies' and 'The interest and willingness of the management group' as critical factors for the determinants of royalties. The difference of each party is that private companies acknowledge 'Available budget plan' as a critical factor while the government-funded research centers value 'Market competitiveness'. These findings suggest four main policy implications which are the investigation of technological demands reflecting specific needs of industrial sites, the diversification of royalty payments for private companies, the differentiated research evaluation system for the purpose of technology transfer and the planning of public R&D project reflecting research time span of private companies.