• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.569-574
• /
• 2008

Recently, the domestic remodeling market is increased in scale. This study is to develop the sanitary piping system which improves quality of life and facility performance when the aged public housing is remodeled. Above all, we found out three standard floor plans in bathrooms of the public housing. And then, the plan and section types of the sanitary piping system were developed for the on-floor piping, a construction cost of each section types was estimated to review the economical fact. Also, the field mock-up test was performed in the type of the pipe shaft with on-floor pit. In result, the developed sanitary piping system was available for the remodeling public housing without a great facility cost. Additionally, the sanitary pipe was replaced easily through the shaft and on-floor fit. And a noise was reduced to a lower unit when the water flowed down.

• Journal of Korea Technology Innovation Society
• /
• v.21 no.4
• /
• pp.1345-1365
• /
• 2018

Following principal-agent relationship between government and funding agency effects on efficiency and management of project, this paper suppose that project management cost rate variable on outsourcing and administration of institution, applies multiple regression analysis and logit analysis by using factors that procurement status of institutional operating expenses and each subordinates scale (Budget, subject number) and method (Top-down/Bottom-up), not a total amount, for examining factors following project efficiency analysis and way of commission. The major variables which effect on efficiency of institution are management cost scale (0.36), institutional operating expenses ratio (-0.47), way of outsourcing, the factors that affect way of outsourcing are portion of project management cost (-38.5) and institutional operating expenses rate (-11.7). This means both legal and financial stability are necessary and it is avoidable moral hazard and adverse selection on principal-agent problem.

• Journal of Intelligence and Information Systems
• /
• v.23 no.2
• /
• pp.139-160
• /
• 2017

Technology commercialization creates effective economic value by linking the company's R & D processes and outputs to the market. This technology commercialization is important in that a company can retain and maintain a sustained competitive advantage. In order for a specific technology to be commercialized, it goes through the stage of technical planning, technology research and development, and commercialization. This process involves a lot of time and money. Therefore, the duration and cost of technology commercialization are important decision information for determining the market entry strategy. In addition, it is more important information for a technology investor to rationally evaluate the technology value. In this way, it is very important to scientifically estimate the duration and cost of the technology commercialization. However, research on technology commercialization is insufficient and related methodology are lacking. In this study, we propose an evaluation model that can estimate the duration and cost of R & D technology commercialization for small and medium-sized enterprises. To accomplish this, this study collected the public data of the National Science & Technology Information Service (NTIS) and the survey data provided by the Small and Medium Business Administration. Also this study will develop the estimation model of commercialization duration and cost of R&D performance on using these data based on the market approach, one of the technology valuation methods. Specifically, this study defined the process of commercialization as consisting of development planning, development progress, and commercialization. We collected the data from the NTIS database and the survey of SMEs technical statistics of the Small and Medium Business Administration. We derived the key variables such as stage-wise R&D costs and duration, the factors of the technology itself, the factors of the technology development, and the environmental factors. At first, given data, we estimates the costs and duration in each technology readiness level (basic research, applied research, development research, prototype production, commercialization), for each industry classification. Then, we developed and verified the research model of each industry classification. The results of this study can be summarized as follows. Firstly, it is reflected in the technology valuation model and can be used to estimate the objective economic value of technology. The duration and the cost from the technology development stage to the commercialization stage is a critical factor that has a great influence on the amount of money to discount the future sales from the technology. The results of this study can contribute to more reliable technology valuation because it estimates the commercialization duration and cost scientifically based on past data. Secondly, we have verified models of various fields such as statistical model and data mining model. The statistical model helps us to find the important factors to estimate the duration and cost of technology Commercialization, and the data mining model gives us the rules or algorithms to be applied to an advanced technology valuation system. Finally, this study reaffirms the importance of commercialization costs and durations, which has not been actively studied in previous studies. The results confirm the significant factors to affect the commercialization costs and duration, furthermore the factors are different depending on industry classification. Practically, the results of this study can be reflected in the technology valuation system, which can be provided by national research institutes and R & D staff to provide sophisticated technology valuation. The relevant logic or algorithm of the research result can be implemented independently so that it can be directly reflected in the system, so researchers can use it practically immediately. In conclusion, the results of this study can be a great contribution not only to the theoretical contributions but also to the practical ones.

• Journal of Technology Innovation
• /
• v.4 no.1
• /
• pp.165-183
• /
• 1996

In acquiring and transferring a superior knowledge assesing the intermediate result value of a competitive R&D project is very important for a firm engaging in R&D. Most existing literatures on R&D evaluation are concerned with project selection and resource allocation. In this paper the stage of an R&D project is classified into research, exploratory development, and development. And a model is suggested which evaluates the intermediate result value before completion of development stage under duopoly and oligopolistic competition. Assessed value of the intermediate result transferred to the next tier company can be used as a minimum acceptable price to the inventor when more advanced knowledge acquired through R&D is transferred to the next tier one. The model suggested is composed of structural variables including research cost, success rates, potential profits, discount rate degree of competition. By using exponential distribution for invertion process time in each stage, we derive a formula that can assess the value of the intermediate result, and we demonstrate how the model can be applied to a competitive R&D situation through an example.

• Asia-Pacific Journal of Business
• /
• v.10 no.2
• /
• pp.1-12
• /
• 2019

Collaborative research and development (R&D) has been encouraged based on the belief that knowledge spill-over is mutually beneficial for partners. Although the benefits are supported by science and technology policy research, the risk of R&D collaboration has not been extensively discussed. Two independent studies suggest that there are risks associated with the overuse of collaborative research frameworks. Two sets of R&D collaboration data were analyzed: between the national bio-technology research program and 1) Data Envelop Analysis (DEA), and 2) between Stochastic Frontier Analysis (SFA). In the case of SFA, output measures were integrated into a single output, with weights extracted from research programme managers' responses to the questionnaire. While the DEA result demonstrated the inefficiency of collaborative research, SFA did not. Unlike previous research highlighting risks associated with disclosing proprietary R&D and potential conflict of interest, our study indicates that the transaction's social cost affects collaborative research efficiency. Therefore, governments promoting R&D collaborations should be carefully managed, and policy makers must reconsider the strict conditions governing compulsory collaborative R&D programs.

• Journal of Information Technology Services
• /
• v.20 no.1
• /
• pp.41-54
• /
• 2021

The SW-centered battlefield management information system R&D project takes a long period of 5-10 years or more by applying a complex and rigid batch acquisition strategy. In order to solve this problem, it is necessary to institutionalize a rapid and flexible battlefield management information system R&D project management procedure applying agile development methodology, and a government project management organization and contract management method to support it In this study, we analyzed the case of applying the Agile development method centered on Scrum to the US SW-centered weapon system R&D project and the characteristics and problems of the battlefield management information system R&D project in Korea, and suggested improvement measures as follows. First, the battlefield management information system R&D model applies the hybrid development method, and the system requirements analysis and system structure design use the existing waterfall development procedure, and the agile method is applied from the SW requirements analysis to the system integration stage. Second, flexible adjustment of performance, schedule, and cost by organizing an Agile IPT in which military (requirements) - DAPA (project management) - developer - functional specialized organizations (test and evaluation, quality, government research institutes, etc.) participate. Third, improving the Basic Order Agreement so that it can be applied to agile R&D.

• Proceedings of the KIEE Conference
• /
• 1998.07a
• /
• pp.134-136
• /
• 1998

When a MCCB Instant trip spring which is adjusted to notrip at -20% of each current from $5{\times}In$ to $10{\times}In$ and trip +20% of those is designed, we should know attraction force between Fixed Magnet and Armature. So we first made some samples, do experiments of weight, and simulated the modelling by 3D Maxwell S/W. With values of experiment and simulated values, we do design instant trip springs and repeat the above process. Finally we set up the Process of designing Instant spring. With it, we can save time and R&D cost.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.4
• /
• pp.640-645
• /
• 2015

Near surface transit system has should be constructed as installation cost of light rail transit with elevated track. So, distance between two substations is longer than conventional system. The long feeding distance results in severe voltage drop. This paper proposes a PWM rectifier instead of diode rectifier. The PWM rectifier has some advantages. This is able to control output voltage constantly to reduce voltage drop and to use regeneration power without additional inverter. This paper analyse on improved voltage profile and cost of substation with PWM rectifier. The analysis of voltage profile use PSIM, and the installation cost of substation with PWM rectifier is compared to substation with diode rectifier.

• Journal of Korean Society for Quality Management
• /
• v.23 no.1
• /
• pp.74-94
• /
• 1995

Through the application of Quality Assurance(QA) techniques in R&D activities, we can approach for cost reduction and productivity improvement with high reliability. Application of QA systems in R&D in developed countries were studied, a enquete survey was performed to investigate researcher's understanding of QA in R&D. As a result of this study, it is considered desirable that QA system be applied partially to the feasible work areas at first, and the scope of application be enlarged to extended areas, later. For these aims, various and feasible QA system should be developed and established. As the need for quality assurance in R&D is expected to be increased continuously in the future, it is imperative for us to be prepared for the application of QA system in R&D activities.

• Korean Management Science Review
• /
• v.13 no.2
• /
• pp.177-191
• /
• 1996

Quality is defined as several terms of fitness for use, conformance to requirements or specification, and loss of social effect. And the quality can be classified into design, production and service quality according to its formation of product (or servece). To be satisfactory product, the product must be controlled to maintain the specified level of quality at the whole life cycle of R&D step through disposal step. And the wrong design is one of the great source of cost. Therefore, the quality assurance on the R&D step is very important. This paper suggests a general procedure for the R&D quality assurance and discusses the methods for the reliable design. And a telecommunication equipment is considered as an applied example. Finally, it is discussed some subjects on the R&D quality assurance as further researches.