• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.169-170
• /
• 2000

The conventional AC PDP has a relatively low efficiency which is close to 1.5 lm/W. If the AC sustain period is replaced by the RF sustain period, due to oscillating and low electric field, almost 60% of the supplied energy is spent by Xe excitation [1]. The efficiency of RF PDP can be $4{\sim}5$ times higher than that of AC PDP. In this paper, we will present the RF PDP that is a new type of PDP. A new display method in PDP using RF pulses is suggested and applied on a 4-inch-diagonal Panel (hereinafter 4" panel). Even though there were many researches in RF discharge, there was not enough research for display application. Now we propose the RF PDP that is a new display field and we will expect to do more research in this field.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.413-413
• /
• 2008

최근 잉크젯, 스크린, 그라비아 등 기존의 인쇄 방식과 인쇄 기술을 이용하여 저가의 전자회로 혹은 전자 소자를 제조하고자 프린팅 소재 및 공정 개발에 대한 산업계의 관심이 증가하고 있다. 특히 PCB, RFID, 디스플레이, 태양전지 분야의 전극재료의 개발에 많은 연구가 진행 중에 있으며, 다양한 인쇄 방법 중 미세회로의 구현이 가능한 잉크젯 프린팅을 통한 전극 형성방법에 주목하고 있다. 본 연구는 잉크젯 프린팅 방식을 통해 배선을 형성하고자 이에 적합한 다양한 농도의 잉크를 배합하여 평가하였으며, 첨가제 및 소결, 건조 조건의 변화를 통해 기재와의 부착력, 배선의 크랙을 조절하였다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2003.11a
• /
• pp.69-72
• /
• 2003

This paper presents a signal processing IC for digital HDTV, which is designed to operate in bunt-in HDW or in HD-set-top Box. The chip supports de-multiplexing an ISO/IEC 13818-1 MPEG-2 TS stream. It decodes MPEG-2 MP@HL video bitstream, and provides high-quality scaled video for display on HDTV monitor. The chip consists of ARM7TDMI for TS-Demux, PCI interface, Audio interface, MPEG2 MP@HL video decoder Display processor, Graphic processor, Memory controller, Audio int3face, Smart Card interface and UART. It is fabricated using Sam sung's 0.18-um and the package of 492-pin BGA is used.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1361-1363
• /
• 2005

In this paper, we report on the performance stability of solution processible OTFT devices with Au/Ti and ITO source-drain (S/D) electrodes. It appears that the contact resistance of the S/D electrode strongly affects the stability of OTFT devices. Interestingly, the devices with the Au/Ti electrode showed lower mobility than those with the ITO (S/D) devices. The field effect mobilities of the devices with the Au/Ti and ITO electrodes were 0.06, and $0.44cm^2/Vs$, respectively. However, the mobility of the device with the Au/Ti electrode was increased up to $0.26cm^2/Vs$ after 2 weeks, while the mobility of the device with ITO electrode was slightly decreased down to $0.41cm^2/Vs$. The experimental data show us that ITO could be used as the S/D electrode for low-cost OTFT devices.

• 한국가스학회:학술대회논문집
• /
• 1999.09a
• /
• pp.175-178
• /
• 1999

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.948-951
• /
• 2005

New technology that reduces photolithography process steps from 4 to 3 in fabrication of TFT LCD is introduced. The core technology for 3mask-TFTs is the lift-off process [1], by which the PAS and PXL layer are formed simultaneously. To evaluate the stability of this lift-off process, outgases from photo resist on a substrate during ITO deposition and the quality of ITO film were analyzed and the conventional photo resist stripper machine which operates lift-off process was examined to see its ability to reduce particle problems of the machine. Through the development of total process and design for TFTs using this 3mask technology, panels in TN and IPS modes which exhibit same performances of a display using a conventional process were achieved. In addition, this process was already verified in the mass production line and now some products are being produced by the 3mask technology.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1077-1080
• /
• 2009

In this paper, we propose a new method for measuring image sticking of an OLED display using a human visual test. We determined that the perceptual image sticking threshold is 2% of luminance difference at 200 nits and 1% at 100 nits, respectively. Color shift must also be considered when evaluating image sticking, as a ${\Delta}$(u', v') shift of just over 0.002 can be recognized regardless of background brightness. Perception of image sticking is affected by the background level, test pattern, and ambient illumination conditions. The evaluation standard must consider both luminance variation and color shift simultaneously.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1115-1117
• /
• 2009

Resist patterning of all layers in TFT and BM layer in CF were carried out using UV-imprinting Lithography to make a 12.1 inch TFT-LCD panel at the resolution of 1280 ${\times}$ 800 lines (125 ppi). Technical challenges and solutions for resist patterning by UV-imprinting are shown in this article.

• Proceedings of the PSK Conference
• /
• 2002.10a
• /
• pp.355.1-355.1
• /
• 2002

Recently. we have reported that several lipoxygenases products directly activate the capsaicin-activated channel as intracellular messengers in neuron. In particular, 12-(S)-hydroperoxyeicosatetraenoic acid turned out to be the most potent endogenous VR activator. This finding prompted us to search for a novel non-vaniloid VR agonists and antagonists. We have designed and synthesized a series of non-vanilloid VR binding ligands based on the structural simllarity between 12-HPETE and capsaicin, the natural VR agonist. Our recent studies on the development of selective vanilloid receptor agonists and antagonists will be presented.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.780-783
• /
• 2006

In this paper, we confirmed the yellowish gravity-mura phenomenon in Fringe-Field Switching (FFS) mode using 2-D simulation. As the cell gap increases, while the LC efficiency of blue wavelength remains almost same, that of red and green wavelength increases continuously. As a result, yellowish phenomenon occurs.