• Applied Chemistry for Engineering
• /
• v.21 no.5
• /
• pp.542-547
• /
• 2010

n-Paraffin and saturated fatty acid methyl esters in the diesel and bio-diesel fuel crystallize at low temperature. Many articles have addressed various solutions for the low temperature crystallization problem and one of them is the use of methacrylate copolymers. In this work, we synthesized a series of copolymers in the reaction condition of 70 : 30 molar ratio of lauryl methacrylate (LMA) (or stearyl methacrylate (SMA)) and alkyl methacrylates. The structures of the copolymers were characterized by $^1H$-NMR and FT-IR spectroscopy, and the molecular weight of copolymers were obtained from Gel Permeation Chromatography (GPC) method. The concentrations of additives were 500~1000 ppm and 1000~10000 ppm in diesel fuels and bio-diesel fuel (BD5 and BD20), respectively. The addition of copolymers changes the many properties of fuel such as the pour point (PP), cloud point (CP) and cold filtering plugging point (CFPP). For example, the low temperature properties of the copolymers containing SMA ($PSMAmR_2n$) were excellently improved about 15, 7, and $10^{\circ}C$ for PP, CP and CFPP, respectively.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.3
• /
• pp.68-74
• /
• 2009

In this paper, we propose an effective memory reduction algorithm to reduce the amount of reference frame buffer and memory bandwidth in video encoder and decoder. In general video codecs, decoded previous frames should be stored and referred to reduce temporal redundancy. Recently, reference frames are recompressed for memory efficiency and bandwidth reduction between a main processor and external memory. However, these algorithms could hurt coding efficiency. Several algorithms have been proposed to reduce the amount of reference memory with minimum quality degradation. They still suffer from quality degradation with fixed-bit allocation. In this paper, we propose an adaptive block-based min-max quantization that considers local characteristics of image. In the proposed algorithm, basic process unit is $8{\times}8$ for memory alignment and apply an adaptive quantization to each $4{\times}4$ block for minimizing quality degradation. We found that the proposed algorithm can obtain around 1.7% BD-bitrate gain and 0.03dB BD-PSNR gain, compared with the conventional fixed-bit min-max algorithm with 37.5% memory saving.

• Korean Journal of Soil Science and Fertilizer
• /
• v.30 no.1
• /
• pp.46-50
• /
• 1997

This study was conducted to find out the main soil physical properties to control the soil hardness in tamped condition. Sandy loam soil was taken and fill it up to wood cubes and then differently trampling experimental cubic lots which were mulched with various materials, such as, leaves, wood plates and bricks. Soil physical properties were measured 2" core and samples were taken at 250 sites with soil hardness. There were highly significant positive correlations between soil hardness and bulk density, and between bulk density and water content. Negative correlations were found between soil hardness and water content, and between soil hardness and gravel content. The correlation coefficients were increased by multiple correlation between soil hardness, bulk density, volumetric water and gravel content. Bulk density was the main factor to control the hardness, and volumetric water and gravel contents were less effected to soil hardness.

• Transactions on Electrical and Electronic Materials
• /
• v.17 no.4
• /
• pp.196-200
• /
• 2016

We have developed new electrostatic discharge (ESD) protection devices with, bidirectional flip chip transient voltage suppression. The devices differ in their epitaxial (epi) layers, which were grown by reduced pressure chemical vapor deposition (RPCVD). Their ESD properties were characterized using current-voltage (I-V), capacitance-voltage (C-V) measurement, and ESD analysis, including IEC61000-4-2, surge, and transmission line pulse (TLP) methods. Two BD-FCTVS diodes consisting of either a thick (12 μm) or thin (6 μm), n-Si epi layer showed the same reverse voltage of 8 V, very small reverse current level, and symmetric I-V and C-V curves. The damage found near the corner of the metal pads indicates that the size and shape of the radius governs their failure modes. The BD-FCTVS device made with a thin n- epi layer showed better performance than that made with a thick one in terms of enhancement of the features of ESD robustness, reliability, and protection capability. Therefore, this works confirms that the optimization of device parameters in conjunction with the doping concentration and thickness of epi layers be used to achieve high performance ESD properties.

• Proceedings of the Korea Technology Innovation Society Conference
• /
• 2011.06a
• /
• pp.191-205
• /
• 2011

• Bulletin of the Korean Space Science Society
• /
• 2009.04a
• /
• pp.30.2-30.2
• /
• 2009

• Journal of Animal Science and Technology
• /
• v.54 no.4
• /
• pp.275-282
• /
• 2012

The data including milk yields, fat and protein percent for 628,395 heads collected by National Agricultural Cooperative Federation, 15 type traits and final score for 62,262 heads collected by Korea Animal Improvement Association, which were born in 1998 to 2004, and net profits calculated from milk price and raising expenses of individuals were used to estimate genetic parameters. The highest positive genetic correlation, 0.81, was shown between body depth (BD) and loin strength (SR). Genetic correlations between body depth (BD) and udder depth (UD), front teat placement (TP) and front teat length (TL) were -0.23, which were lowest among the linear type traits. Furthermore, medium level of negative genetic correlations were shown the milk yield with milk contents rate traits. Mostly low level of positive genetic correlations were shown between the milk traits and linear score traits except milk yield and stature. Most of the genetic correlations of between the linear score traits and net profit were low level of positive or negative genetic correlations. Among the genetic correlations, body depth (BD), angularity (DF) and rear attachment width (UW), and final score (FS) with net profit were high as 0.17, 0.17, 0.18 and 0.18, respectively. Finally all of the genetic correlations between net profit and milk traits were positive and higher than the linear traits with positive genetic correlations. The results of this study suggest that net profit has been related with the linear traits, such as body depth (BD), angularity (DF) and rear attachment width (UW) traits, and furthermore, milk traits including yield and contents rates influence positively and greatly on net profit.

• BMB Reports
• /
• v.35 no.4
• /
• pp.389-394
• /
• 2002

$[Ru(bpy)_2(dppz)]^2+$ (bpy=2,2'-bipyfidine, dppz=dipyrido[3,2-a:2',3'-c]phenazine) (RuBD), a long-lifetime metal-ligand complex, displays favorable photophysical properties. These include long lifetime, polarized emission, but no significant fluorescence from the complex that is not bound to DNA. To show the usefulness of this luminophore (RuBD) for probing the bending and torsional dynamics of nucleic acids, its intensity and anisotropy decays when intercalated into supercoiled and relaxed pTZ18U plasmids were examined using frequency-domain fluorometry with a blue light-emitting diode (LED) as the modulated light source. The mean lifetimes for the supercoiled plasmids (< $\tau$ >=148 ns) were somewhat shorter than those for the relaxed plasmids (< $\tau$ >=160 ns). This suggests that the relaxed plasmids were shielded more efficiently from water. The anisotropy decay data also showed somewhat shorter slow rotational correlation times for supercoiled plasmids (288 ns) than for the relaxed plasmids (355 ns). The presence of two rotational correlation times suggests that RuBD reveals both the bending and torsional motions of the plasmids. These results indicate that RuBD can be useful for studying both the bending and torsional dynamics of mucleic acids.

• Transactions on Electrical and Electronic Materials
• /
• v.15 no.5
• /
• pp.257-261
• /
• 2014

Multilayered CdTe/PSS films were prepared by the electrostatic self-assembly method in an aqueous medium. Positively-charged cadmium telluride (CdTe) nanoparticles and anionic polyelectrolyte, poly (sodium 4-styrene sulfonate) (PSS) were assembled alternately in order to build up a multilayered film structure. A linear proportion of absorbance to the number of bilayers suggests that an equal amount of CdTe was adsorbed after each dipping cycle, which resulted in the buildup of a homogenous film. The binding energies of elements (Cd and Te) in multilayered CdTe/PSS film shifted from those of the CdTe nanoparticles in the pure state. This result indicates that the interfacial electron densities were redistributed by the strong electrostatic interaction between the oppositely-charged CdTe and PSS. Electrochemical properties of the multilayered CdTe/PSS films were studied in detail by cyclic voltammetry (CV).

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.7
• /
• pp.571-577
• /
• 2016

In this paper, we propose a novel propulsion method for a Biomimetic underwater robot, which is a bio-inspired approach. The proposed propulsion method mimics the pectoral fins of a real fish. Pectoral fins of real fish are able to propel and change direction. We designed the propulsion mechanism of 1 D.O.F. that has two functions (propel and change direction). We named this propulsion system 'Flipper'. The proposed propulsion method can control forward, pitch and yaw motion using the Flipper. We made an experimental underwater robot system and verified the proposed propulsion method. We measured its maximum speed and turning motion using an experimental underwater robot system. We also analyzed the thrust force from the maximum speed, using the thrust equation. Experimental results showed that our propulsion method enabled the thrust system of the biomimetic robot.