• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.1228-1230
• /
• 1992

The permanent magnet synchronous motor(PMSM) is receiving Increased attention for servo drive applications in recent years because of its high torque to inertia ratio, superior power density and high efficiency. By vector-controll method, PMSM has the same operating characterics as seperately excited dc motor. The drive system of servo motor is requested to have an accurate response for the reference input and a quick recovery for the disturbance such as load torque. However, when the unknown disturbances and parameter variations are imposed on the permanent magnet synchronous motor(PMSM), the drive system is significantly effected by them. As a result, the drive system with both a fast compensation and a robustness to a parameter variations is requested. This paper investigates the possibility of applying the fuzzy logic controller(FLC) using Multi-Rule Base In a servo motor control system. In this paper, The five Rule Bases(1 to 5) are selected to recover the state error caused by the disturbance in steady state. In the initial operating mode. Rule Base 0 is used. To show the validity of the proposed fuzzy logic controll system, the computer simulation results are provided.

• Asian Pacific Journal of Cancer Prevention
• /
• 제17권2호
• /
• pp.553-555
• /
• 2016

Background: Liver cytology is indicated and requested for evaluating hepatic masses in symptomatic or serendipitous cryptic discovered lesions. Objective: To determine the cytomorphological patterns of hepatic lesions identified among a group of Sudanese patients. Materials and Methods: This is an analytical descriptive hospital-based study included 165 patients undergoing ultrasound-guided fine needle is an aspiration cytology (FNAC)for hepatic lesions, at Al-Amal Military Hospital & Khartoum Teaching Hospital in Khartoum, Sudan. Clinical data were reviewed. Air dried Diff Quick stained smears were grouped into unsatisfactory samples, benign lesions, and malignant neoplasms. Results: Our population were consisted of 35 (21.2%) females and 130 (78.8%) males, with a male to female ratio 3.7:1 and an age ranged between 47 to 80, and a mean age $57{\pm}7$. Of 165 cases, 57 (34.5%) were benign, no atypia were noticed, 101 (61.2%) were malignant. Most investigated patients were found to have metastatic lesions. Conclusion: FNAC is a useful tool for investigating hepatic lesions.

• 한국전자통신학회논문지
• /
• 제10권3호
• /
• pp.357-364
• /
• 2015

본 연구에서는 아날로그 메모리를 이용한 DC-DC 컨버터 제어기를 설계하였다. 이 방식은 기존의 폐루프 방식의 컨버터 제어기가 안고 있는 안정도 문제를 근본적으로 해결하는데 기여하게 될 것이다. 본 연구에서 아날로그 메모리는 컨버터의 출력과 이에 대응되는 최적의 시비율 판단을 위한 연상메모리를 구현하는데 이용된다. 메모리의 읽기 동작은 연상메모리의 최적 함수 선택을 위하여 절대값 회로와 승자전취 메커니즘 회로가 사용되며, 병렬의 고속 쓰기와 읽기 동작뿐만 아니라 고집적을 가능하게 하는 시스템 구성이 제안된다.

• Earthquakes and Structures
• /
• 제17권6호
• /
• pp.599-609
• /
• 2019

After an earthquake, a quick seismic assessment of a structure can facilitate the recovery of operations, and consequently, improve structural resilience. Especially for facilities that play a key role in rescue or refuge efforts (e.g., hospitals and power facilities), or even economically important facilities (e.g., high-tech factories and financial centers), immediately resuming operations after disruptions resulting from an earthquake is critical. Therefore, this study proposes a prompt post-earthquake seismic evaluation method that uses displacement and acceleration measurements taken from real structural responses that resulted during an earthquake. With a prepared pre-earthquake capacity curve of a structure, the residual seismic capacity can be estimated using the residual roof drift ratio and stiffness. The proposed method was verified using a 6-story steel frame structure on a shaking table. The structure was damaged during a moderate earthquake, after which it collapsed completely during a severe earthquake. According to the experimental results, a reasonable estimation of the residual seismic capacity of structures can be performed using the proposed post-earthquake seismic evaluation method.

• 대한산업공학회지
• /
• 제37권4호
• /
• pp.390-399
• /
• 2011

Generally the life-cycle cost of complex systems composed of several sub systems or equipments such as train, aircraft weapon systems is spent much more during operation and maintenance phase than development phase. The maintenance cost for maintaining the availability and extending the life span of systems comprise a large proportion of systems operation cost. The cycle of preventive maintenance affects operation and maintenance cost a lot. In this study we introduce a way minimizing life-cycle cost of systems by calculating more reliable preventive maintenance period than the results of previous study using systems reliability data considered the reliability and failure effect ratio of sub-systems or components. We can solve the preventive maintenance period problem known as NP-Hard as quick as possible by using modified genetic algorithm than using other models introduced in previous study.

• Journal of Nutrition and Health
• /
• 제14권3호
• /
• pp.124-128
• /
• 1981

This study was carried out to understand the activity of pepsin, the proteolytic enzyme, to octapeptide (angiotensin II) in the presence of various synthetic antioxidants as food additives. 1) Dibutyl hydroxy toluene, butyl hydroxyanisole and ethyl protocathechuate did not influence the inhibitory activity of pepsin an the octapeptide as a substrate, but sodium-L-ascorbate inhibited pepsin activity at above 100ppm. However sodium L-ascorbate was completely removed after 30 minutes. 2) Pepsin brought about a quick break up the octapeptide, Asp-Arg-Val-Tyr-Ile-His-Gly-Phe, by splitting the Gly-Phe and Val-Tyr bond. 3) The melting point of synthetized octapeptide was $209-212^{\circ}C$, chemical formula and molecula weight were $C_{43}H_{65}N_{13}O_{12}{\cdot}CH_3COOH{\cdot}H_2O$ and 956.05, respectively. 4) The amino acid mole ratio of synthetized octapeptide by acid hydrolysis were Asp:0.98, Arg: 1.02, Val: 1.00. Tyr: 0.95, Ile: 1.00, His: 1.03, Gly: 0.96, Phe: 1.00.

• 한국유체기계학회 논문집
• /
• 제15권1호
• /
• pp.21-26
• /
• 2012

In this investigation, the aerodynamic performance evaluation of a 1MW class blade has been performed with the purpose of the verification of target output and its clear understanding of flow field using CFD commercial code, ANSYS FLUENT. Before making progress of CFD analysis the HERACLES V2.0 software based on blade element momentum theory was applied for confirmation of quick and approximate performance in the preliminary stage. The blade was designed to produce the target output of a 1MW class at a rated wind speed of 12m/s, which consists of five different airfoils such as FFA W-301, DU91-W250, DU93-W-210, NACA 63418 and NACA 63415 from hub to tip. The mechanical power by CFD is approximately 1.195MW, which is converted into the electrical power of 1.075MW if the system loss is considered to be 0.877.

• 한국식품저장유통학회:학술대회논문집
• /
• 한국식품저장유통학회 2003년도 제23차 추계총회 및 국제학술심포지움
• /
• pp.164.1-164
• /
• 2003

In this study, medium-chain fatty acid (MCFA) metabolized in the liver for quick energy and CLA exhibited biological activity were used for synthesis of structured lipids (SLs). SLs were synthesized by acidolysis of soybean oil, capric acid (C10:0) and CLA with Chirazyme L-2 lipase as biocatalysts. The effect of enzyme load (2, 4, 6, 8, 10% w/w substrates) was investigated. Production of SL (scale-up) was performed with a 1:2:2 molar ratio (oi1/C10:0/CLA) for 24 h at 55$^{\circ}C$ in a stirred batch reactor (420 rpm). The reaction was catalyzed by Chirazyme L-2 lipase (24.48g, 4％ w/w substrates). The scale-up result showed that capric acid and total CLA were incorporated 4.9%, 4.1% (mole%), respectively, in soybean oil. Then, physio-chemical property and flavor characteristic of produced SL-soybean oil were analyzed. Therefore, SL-soybean oil containing C10:0 and CLA was successfully synthesized and may be beneficial in desirable food and nutritional applications.

• Nuclear Engineering and Technology
• /
• 제24권3호
• /
• pp.219-227
• /
• 1992

모의 붕산폐액을 석회와 반응시키고 반응기를 겸한 건조기에서 이를 건조시켜 얻어진 건조물의 특성을 살펴보았다. 반응과 건조후 생성된 건조물의 주된 화학종은 2CaO.B$_2$O$_3$로 확인되었다 건조물의 입도분포로부터 첨가제로서는 생석회가 소석회보다 우수함을 알 수 있었고, 건조물의 부착성 및 응집성을 고려하여 반응몰비(Ca/B)는 3/4인 조건으로 결정하였다. 수분함량이 8 wt% 정도까지 되도록 건조시켜도 건조물은 유동성이 있어 수송에 문제가 발생되지 않으며 건조시간의 단축도 가능하다.

• 한국산학기술학회논문지
• /
• 제8권6호
• /
• pp.1376-1380
• /
• 2007

대전입자형 디스플레이는 높은 대조비와 넓은 시야각 그리고 빠른 응답속도를 가졌다. 본 연구에서는 음전하를 띈 노란색 대전입자와 양전하를 띈 검은색 대전입자를 사용하여 화상을 표시하였으며, 기존의 혼합된 대전입자를 충전하는 방식과는 대비 패널의 상판과 하판에 형성된 셀에 두 대전입자를 전계에 의해 각각 어드레싱하였다. 그리고 상판과 하판을 합착한 후 Aging을 하여 패키징을 하였으며, 합착된 패널은 전극 설계에 의해 4 채널의 전극에 Matrix 구동을 했다. 패널에 충전되는 layer 수는 최소 2 layer가 요구되며, 본 연구에서는 대전입자의 layer는 격벽의 높이로 조절하였다. 패키징된 패널의 상판에 양의 전압을 인가한 결과, 노란색 대전입자는 상판의 전극으로 이동하고 검은색 대전입자는 하판의 전극으로 이동하였다.