• Title/Summary/Keyword: Quaternary carbon

Search Result 80, Processing Time 0.022 seconds

Synthesis of Quaternary Carbon Unit Containing Vinyl Substituent (Vinyl 치환기를 갖는 4급탄소 Unit의 합성)

  • Suh, Young-Ger;Kim, Hwa-Soon;Cho, Yoon-Sang
    • YAKHAK HOEJI
    • /
    • v.33 no.4
    • /
    • pp.226-228
    • /
    • 1989
  • In connection with the synthesis of the biologically active pimarane diterpenoids, some synthetic routes to the quaternary carbon unit were examined. Especially, Claisen rearrangement of allyl acetates prepared from acetol provided ${\gamma}-hydroxy$ acid containing vinyl substituent as the desired unit.

  • PDF

Low energy and area efficient quaternary multiplier with carbon nanotube field effect transistors

  • Rahmati, Saeed;Farshidi, Ebrahim;Ganji, Jabbar
    • ETRI Journal
    • /
    • v.43 no.4
    • /
    • pp.717-727
    • /
    • 2021
  • In this study, new multiplier and adder method designs with multiplexers are proposed. The designs are based on quaternary logic and a carbon nanotube field-effect transistor (CNTFET). The design utilizes 4 × 4 multiplier blocks. Applying specific rotational functions and unary operators to the quaternary logic reduced the power delay produced (PDP) circuit by 54% and 17.5% in the CNTFETs used in the adder block and by 98.4% and 43.62% in the transistors in the multiplier block, respectively. The proposed 4 × 4 multiplier also reduced the occupied area by 66.05% and increased the speed circuit by 55.59%. The proposed designs are simulated using HSPICE software and 32 nm technology in the Stanford Compact SPICE model for CNTFETs. The simulated results display a significant improvement in the fabrication, average power consumption, speed, and PDP compared to the current bestperforming techniques in the literature. The proposed operators and circuits are evaluated under various operating conditions, and the results demonstrate the stability of the proposed circuits.

Adsorption of nitrate onto nitrogen-doped activated carbon fibers prepared by chemical vapor deposition

  • Yoo, Pyunghwa;Amano, Yoshimasa;Machida, Motoi
    • Korean Journal of Chemical Engineering
    • /
    • v.35 no.12
    • /
    • pp.2468-2473
    • /
    • 2018
  • Nitrogen-doped activated carbon fibers (ACFs) were prepared by chemical vapor deposition using melamine powder and acetonitrile for introducing quaternary nitrogen on the commercial ACFs, subsequently heated at $950^{\circ}C$ and activated by steam. Adsorption experiments of nitrate in aqueous solution were also conducted to evaluate adsorption capacity of the prepared ACFs using ion chromatography. The amount of introduced nitrogen content and nitrogen species on activated carbon fibers was examined by CHN elemental analyzer and X-ray photoelectron spectroscopy, respectively. As a result, adsorption capacity of quaternary nitrogen-doped ACF (ST-ML-AN-ST) was 0.75 mmol/g, indicating ca. two-times higher than that of untreated ACF (0.38 mmol/g). According to the adsorption data, the Langmuir isotherm model was the best fit. The prepared samples were also regenerated using hydrochloric acid. After regeneration, the adsorption capacity of the nitrogen-doped ACF (ST-ML-AN-ST) showed ca. 80% on average, implying that a portion of nitrates was adsorbed on the prepared ACFs irreversibly.

Ion Pair Extraction of Aliphatic Amines and Quaternary Ammonium Salts by Picric Acid (Picric Acid에 의한 지방족 아민류와 4급 암모늄 염류의 이온쌍 추출)

  • 김박광;이종숙;장성기;나운용;옥치환
    • YAKHAK HOEJI
    • /
    • v.35 no.3
    • /
    • pp.182-189
    • /
    • 1991
  • Systematic study on the extraction of ion pair by the use of picric acid (PCA) as an ion pair forming reagent to the aliphatic amines has not be done by spectrophotometric method. The extraction of ion pair by the use of PCA and 23 kinds of the aliphatic amines was examined. The procedure is as follows; Elving's buffer solution (pH 1.3~10, ionic strength 0.5) each amine solution, and PCA solution were taken into a test tube. The mixture was shaken mechanically with chlorform. The organic phase was filtered through a filter paper to remove water droplets. The absorbance was examined at $\lambda_{max}$ against a reagent blank. Primary and secondary whose carbon number were more than 7 or 6, respectively, are extractable as ion pairs with PCA, while tertiary amines and quaternary ammonium salts are also extractable without the correlation of carbon number. It was considered that the ion pair extraction of primary and secondary amines was affected by the number of carbon of amines, but its extraction of tertiary amines or quaternary ammonium salts was affected by kind of aliphatic amines rather than pKa values or carbon number of amines.

  • PDF

Efficient Construction of Quaternary Carbon: Stereocontrolled Synthesis of Novel Abacavir Analogue

  • Kim, Ai-Hong;Hong, Joon-Hee
    • Bulletin of the Korean Chemical Society
    • /
    • v.28 no.9
    • /
    • pp.1545-1548
    • /
    • 2007
  • This paper discusses the racemic and stereoselective synthetic route for novel 4'α -methyl and 6'α -methyl analogues of abacavir. The quaternary carbon at the 4'-position of carbocyclic nucleoside was installed successfully via a Claisen rearrangement. The stereocontrolled construction of a methyl group in the 6'α - position was directed through the Felkin-Anh rule. A Bis-vinyl compound 9 was cyclized successfully using Grubbs' catalyst II to provide a carbocycle nucleus for the target compound. The synthesized compound 15 showed moderate anti-HIV activity (EC50 = 10.67 μM, MT-4 cell lines).

The Quality Properties of Quaternary Component Blended High Fluidity Concrete Using Industrial By-products for Carbon Neutrality (탄소중립을 위한 산업부산물 활용 4성분계 고유동 콘크리트의 품질특성)

  • Yong-Jic, Kim
    • Journal of the Korean Recycled Construction Resources Institute
    • /
    • v.10 no.4
    • /
    • pp.506-513
    • /
    • 2022
  • In this paper, as part of a study for carbon neutrality, the quality properties of quaternary component high-fluidity concrete, which significantly replaced up to 80 % of the cement usage by using three industrial by-products, were evaluated. As a result of the evaluation, even if a large amount of industrial by-products were replaced by more than 80 % of the amount of cement used, it was possible to obtain quality that satisfies the target performance in all concrete mix. In the case of flow properties, mechanical properties, and durability, compared to the existing standard concrete mix, the performance tends to decrease, but it is judged that the performance above the required performance level can be satisfied. When considered comprehensively, the quaternary component High-Fluidity Concrete with a large mixing amount of fine powder of blast furnace slag showed relatively good performance.

Direct Organocatalytic Regioselective α-Hydroxyamination of α-Branched Aldehydes

  • Kim, Sung-Gon;Ahn, Eun-Ju;Park, Tae-Ho
    • Bulletin of the Korean Chemical Society
    • /
    • v.28 no.10
    • /
    • pp.1665-1669
    • /
    • 2007
  • A direct regioselective α-hydroxyamination of α-branched aldehydes with nitrosobenzene using cis-5-benzylproline as catalyst has been developed for the preparation of α-hydroxyamino aldehydes possessing a quaternary carbon center. Such compounds are versatile building blocks for the synthesis of quaternary α- amino acids, β-amino alcohols, and 1,2-diamines.