• 설비공학논문집
• /
• 제25권12호
• /
• pp.674-678
• /
• 2013

We present a non-invasive technique to the measure temperature distribution in nano-sized porous thin films by means of the two-color laser-induced fluorescence (2-LIF) of rhodamine B. The fluorescence induced by the green line of a mercury lamp with the makeup of optical filters was measured on two separate color bands. They can be selected for their strong difference in the temperature sensitivity of the fluorescence quantum yield. This technique allows for absolute temperature measurements by determining the relative intensities on two adequate spectral bands of the same dye. To measure temperature fields, Silica (SiO2) nanoporous structure with 1-um thickness was constructed on a cover glass, and fluorescent dye was absorbed into these porous thin films. The calibration curves of the fluorescence intensity versus temperature were measured in a temperature range of $10-60^{\circ}C$, and visualization and measurement of the temperature field were performed by taking the intensity distributions from the specimen for the temperature field.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.393-394
• /
• 2008

$TiO_2$ is a wide band-gap semiconductor (3.4 eV) and can only absorb about 5% of sun light in the ultraviolet light region, which largely limits its practical applications because of the lower utility of sun light and quantum yield. In order to move the absorption edge of $TiO_2$ films to visible spectrum range, we have made the impurity level within a band-gap of $TiO_2$ thin film by introduction of oxygen vacancy. Oxygen-defected $TiO_2$ thin film have prepared by reactive sputtering with the partial pressure of Ar:$O_2$=10:90~99.33:0.66 ratio. As a result, we could have the impurity level of about 2.75 eV on condition that oxygen partial pressure is below 7%.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.252-257
• /
• 2004

Nanometer-sized structures are being applied to many devices including micro/nano electronics, optoelectronics, quantum devices, MEMS/NEMS, biosensors, etc. Especially, the thin film with submicron thickness is a basic structure for fabricating these devices, but its mechanical behaviors are not well understood. The mechanical properties of the thin film are different from those of the bulk structure and are difficult to measure because of its handling inconvenience. Several techniques have been applied to mechanical characterization of the thin film, such as nanoindentation test, micro/nano tensile test, strip bending test, etc. In this study, we focus on the strip bending test because of its high accuracy and moderate specimen preparation efforts, and measure Au thin film, which is a very popular material in micro/nano electronic devices. Au film is deposited on Si substrate by evaporation process, of which thickness is 100nm. Using the strip bending test, we obtain elastic modulus, yield and ultimate tensile strength, and residual stress of Au thin film.

• Journal of Ecology and Environment
• /
• 제29권1호
• /
• pp.41-47
• /
• 2006

We investigated the enect of $O_3$ on the photosynthetic characteristics of tree of heaven (Ailanthus altissima) that is naturalized plant and used as restoration plant for contaminated area. Two-year-old seedlings were planted to pots and transferred into closed $O_3$ chamber. Photosynthetic pigments contents and photosynthetic characteristics were measured every three weeks under 100 pub $O_3$ fumigation. There was no visible foliar injury by $O_3$ exposure and contents of photosynthetic pigments did not show significant differences between control and $O_3$-treated seedlings. Also there were no significant differences in stomatal conductance, and water use efficiency. But photosynthetic rate and apparent quantum yield (AQY) of $O_3$ treated seedlings were reduced after nine weeks of ozone fumigation. In addition, the reduction of carboxylation efficiency and photorespiration were observed in the leave of $O_3$ treated seedlings after six weeks. In accordance with our result, carbon fixation system of A. altissima was most sensitive to $O_3$ stress to evaluate physiological damage induced by $O_3$.

• 한국표면공학회지
• /
• 제52권6호
• /
• pp.334-341
• /
• 2019

Organometal halide perovskite materials have attracted much attention in the photovoltaic and light emitting devices due to the compositional flexibility with AMX₃ formula (A is an organic amine cation; M is a metal ion; X is a halogen atom). The addition of homovalent or heterovalent metal cations to the bulk organohalide perovskites has been performed to modify their energy band structure and the relevant optoelectronic properties by ligand-assisted ball milling. Here, we report CH₃NH₃Pb_1-xM_xBr₃ nanocrystals substituted by metallic cations (M is Sn²⁺, In³⁺, Bi³⁺; x = 0, 0.01, 0.02, 0.05, 0.1, 0.2). Photoluminescence and quantum yield was significantly reduced with increasing metallic cations content. These quenching effect could be resulted from the metal cations that behave as a non-radiative recombination center.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.398-399
• /
• 2006

$TiO_2$ is a wide band-gap semiconductor (3.4 eV) and can only absorb about 5% of sun light. in the ultraviolet light region, which largely limits its practical applications because of the lower utility of sun light and quantum yield. In order to move the absorption edge of $TiO_2$ films to visible spectrum range, we have made the impurity level within a band-gap of $TiO_2$ thin film by introduction of oxygen vacancy. Oxygen-defected $TiO_2$ thin film have prepared by reactive sputtering with the partial pressure of Ar:$O_2$=10:90~99.33:0.66 ratio. As a result, we could have the impurity level of about 2.75 eV on condition that oxygen partial pressure is below 7%.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.272-272
• /
• 2013

The attractive features of photosynthetic reaction center proteins for energy application make them useful in solar energy conversion to hydrogen fuel or electrical energy. Almost unity charge separation quantum yield and its rapid speed of ~1ns, absorbance region in visible light (480~740 nm) and high proportion of photosynthetically active solar energy of 48.5% allowed photosystem1 to exploited as a bio-material for photo-energy devices. Directionality of photosystem1 in electron transfer can solve main problem in two-step water splitting process where back reaction deteriorates the overall efficiency. In the study, photosystem1 was extracted from spinach and the photo-induced excited electron in the reaction center was utilized in various field of light energy application. First, hydrogen evolving system realized by photodeposition of platinum at the end of the electron transfer chain, with combining specific semiconductor to oxidize water in the first step of Z-scheme. The evaluation by gas-chromatography demonstrated hydrogen evolution through the system. For the further application of photoelectrical material on electrode, photosystem1 have been controlled by copper ion, which is expected to assemble photosystem in specific orientation followed by maximized photoelectrical ability of film. The research proposed concrete methods for combining natural protein and artificial materials in one system and suggested possibility of designing interface between biological and inorganic materials.

• 한국광물학회지
• /
• 제18권1호
• /
• pp.45-52
• /
• 2005

2차원 고상 핵자기 공명기(2-dimensional solid-state NMR, 이하 2차원 고상NMR)와 관련된 기술과 이론의 발전과 더불어 획기적으로 증가한 스펙트럼의 분해능으로 기존의 일차원 NMR 로는 얻을 수 없었던, 비정질 규산염(유리질, 용융체, silicate glasses and melts)의 다양한 원자-분자 단위의 구조를 규명할 수 있다. 본 논문에서는 이러한 2차원 고상 NMR 방법론의 하나인 3QMAS NMR을 이용하여 이전까지 알려지지 않았던 고압환경에서의 비정질 지구물질의 원자/분자 구조에 대한 최근의 연구결과를 간략히 소개한다.

• ALGAE
• /
• 제28권2호
• /
• pp.203-211
• /
• 2013

Dunaliella salina and Dunaliella bardawil are well known for carotenogenesis, the overproduction of carotenoids, under stress conditions. The effect of high light (HL) and low light (LL) on the growth, morphology, photosynthetic efficiency, and the ${\beta}$-carotene and zeaxanthin production of D. salina CCAP 19/18 and D. bardawil was investigated and compared. Both strains showed similar growth kinetics under LL growth condition, but D. salina CCAP 19/18 was faster. As the light intensity increased, D. salina CCAP 19/18 cells were elongated and D. bardawil cells became larger. Both strains showed decrease of the maximum quantum yield of PSII ($F_v/F_m$) and election transport rate (ETR) under HL growth condition and D. salina CCAP 19/18 was less liable to the light stress. Both strains had about 1.8 and 5 times difference in the $O_2$ evolution rate at LL and HL conditions, respectively. The ${\beta}$-carotene and zeaxanthin production were increased as the light intensity increased in both strains. D. bardawil was more sensitive to light intensity than D. salina CCAP 19/18. The possible application of D. salina CCAP 19/18 as a carotenogenic strain will be discussed.

• Bulletin of the Korean Chemical Society
• /
• 제19권7호
• /
• pp.747-753
• /
• 1998

The phoisomerization process of symmetric carbocyanine dyes such as 3,3'-diethyloxadicarbocyanine iodide (DODCI), 3,3'-diethylthiadicarbocyanine iodide (DfDCI), 1,1'-diethyl-2,2'-dicarbocyanine iodide (DDI), 1,1'-diethyl-2,2'-carbocyanine iodide (DCI), and cryptocyanine (1,1'-diethyl-4,4'-carbocyanine) iodide (CCI) have been studied by measuring the steady state and time resolved fluorescence spectra and the ground-state recovery profiles. The steady-state fluorescence spectrum of photoisomer as a function of concentration and excitation wavelength provides the evidence that the fluorescence of photoisomer is formed by the radiative energy transfer from the normal form and the quantum yield for the formation of photoisomer is increased by decreasing the excitation wavelength. The fluorescence decay profiles have been measured by using the time correlated single photon counting (TCSPC) technique, showing a strong dependence on the concentration and the detection wavelength, which is due to the formation of excited photoisomers produced either by the radiative energy transfer from the non-nal form or by absorbing the 590 nm laser pulse. We first report the fluorescence decay time of photoisomers for these cyanine dyes. The experimental results are explained by introducing the semiempirical calculations. The ground state recovery profiles of DTDCI, DDI, and CCI normal forms have been measured, showing that the recovery time from the singlet excited state is similar with the fluorescence decay time.