• 대한산업공학회지
• /
• 제31권2호
• /
• pp.173-179
• /
• 2005

This paper presents an extended EMQ model which determines an optimal production quantity for a single stage production system when defective items are stochastically produced in the production process and they are re-processed in the rework process to convert them into non-defectives. Through the mathematical modeling, an optimal solution minimizing the average cost per unit time and minimum average cost as well as some properties are derived. It can be shown that each of the existing models is a special case of the proposed model under some conditions. Numerical experiment is carried out to examine the behavior of the proposed model and support properties derived.

• 산업경영시스템학회지
• /
• 제34권4호
• /
• pp.25-34
• /
• 2011

In this paper, we investigate an inventory system where a single manufacturer purchases and processes raw materials in order to deliver finished goods to multiple retailers. Earlier study in this type of supply chain only consider a single raw material in order to produce finished goods, but we consider multi-raw materials in order to produce finished goods. Also, we develop an iterative solution procedure to find the order quantity for the finished goods and raw materials, and the number of shipments between manufacturer and retailers that minimizes the total cost per unit time of the raw materials ordering and holding, manufacture's setup and finished goods holding, the retailer's ordering and inventory holding. Numerical examples are presented to illustrate that jointly considering the total cost results in less total cost than that of considering them separately.

• Journal of Multimedia Information System
• /
• 제6권3호
• /
• pp.155-164
• /
• 2019

We intended to confirm that microwave attenuation by tree leaves is strongly linked to water content in leaves. We sampled natural broadleaves, including Japanese cinnamon, and investigated their effects on the microwave (3 to 20 GHz) frequency characteristics using a network analyzer. Experiments determined that microwave attenuation by foliage increases as a linear function of frequency per unit weight (gram). As the frequency increases, the spatial resolution increases, but the phase difference (imaginary component) increases. So we solved the dispersion of phase difference by sweeping the frequency and taking the intermediate value. Based on these experimental results, we developed a microwave scanner on 10Ghz to describe foliage moisture as a image and to enable assessments of leaf condition. Photosynthesis is the process whereby plants synthesize oxygen and sugars from carbon dioxide and water, thereby converting light energy into chemical energy. Since water is a major parameter of photosynthesis, the quantity of water accumulated inside a leaf reflects leaf health. The equipment described here and related microwave technologies will help assess the capacity of leaves to absorb atmospheric carbon dioxide.

• International Journal of Internet, Broadcasting and Communication
• /
• 제14권2호
• /
• pp.70-78
• /
• 2022

The trenchless entire repair technology (TERT) have many different names depending on the companies, and they have the same or similar methods as well as materials. In addition, there was quiet difficulty in application of field working and even confuse to classify for new TERT, while application criteria of TERT is not listed systematically. This study proposed standardization and method for TERT affecting by pipe condition, working materials, working method, specification/quantity per unit according to field condition, strange affairs and others. Determination criteria of defective sewer pipe has proposed to effective method which modify a criteria between Ministry of Environment and Seoul Metropolitan City. A Cured-in-place pipe (CIPP) is suitable for TERT, and the design criteria for the entire broken pipe are proposed when the pipe itself deforms more than 10%. A check lists are specimen preparing, hardening site made by clamped mold, numbers, flexural and tensile property, water leak and desquamation test, and have to use material property of minimum CIPP value depend on ISO 11296-4, ISO 11297-4, KS M3550-7 and KS M3550-9.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.714-715
• /
• 2015

Drill and blast method has been most widely used in tunnel excavation, after NATM (New Austrian Tunneling Method) was introduced in 1983. The NATM method utilized mass of shotcrete to secure the bearing capacity of tunnels. Overbreak defined how much larger the actual excavation was than the planned. When it became larger, more shotcrete was required to fill in it Here, payline fixed allowable overbreak, referring to payable amounts of shotcrete. Since owner was not responsible for shotcrete exceeding payline, it was important to properly establish the standards for payline. Although the standards were provided in 'Poom-sam'(standardized quantity per unit), they did not properly reflect the actual conditions for excavation. Thus, this study reviewed existing domestic and foreign standards for overbreak, and estimated overbreak for each type of support using survey data, and finally provided the improvements on the current standards.

• Fisheries and Aquatic Sciences
• /
• 제4권3호
• /
• pp.150-158
• /
• 2001

A study on the amount, distribution and item of bottom litter on the sea-bed was conducted by the bottom trawl net at 5 sections in Chinhae Bay over a year. The number and weight of litter found per unit of swept area (1 hectare) in each section were estimated as the range of 8.76-80.63 pieces, 3.51-108.39kg, respectively. The seasonal variation of high (Aug., '97) and low season (Feb., '98) in quantity was small, and it was about 2 times as the range of 24.58- 52.61 pieces/ha between them. But the weight variation between high (Apr., '98) and low season (Aug., '97) was very large, about 30 times as the range of 4.06-119.64kg/ha. The largest and second composition on the weight of bottom litter in Chinhae Bay are $76\%$ in other-litter with compound and bulky materials, and $93\%$ in fishing gear, respectively. The relationship between quantity and weight of bottom litter was not occurred due to the variety of specific gravity. Of the fishing gear, fishing nets was portioned to be 2.571kg/ha in weight and $84.9\%$ in composition. So these results prove that fishing nets were discarded as the most part of fishing gear during fishing activity in the bay. The largest composition of the soiled state classified into 3 styles in overall bottom litter was $69\%$ in very soiled state, and the second one of $28\%$ in the soiled state. On the other hand, new state is very small and portioned in $3.0\%$ of all. Chinhae Bay was estimated to be about 10 times in quantity and about 36 times in weight of Tokyo Bay. Therefore, these suggest that Chinhae Bay is a very serious polluted estuary caused by the bottom litter such as heavy and bulky wastes, fishing gear.

• 에너지공학
• /
• 제23권4호
• /
• pp.41-48
• /
• 2014

지금까지 관행적으로 액체의 누출은 순간누출과 연속누출로 분류 되어 왔다. 본 논문에서는 이러한 분류의 문제점을 인식하고 새로운 분류 방법을 찾기 위하여 제한된 시간 동안 누출되는 극저온 액체의 확산에 관한 연구를 수행하였다. 이러한 물리적 현상은 누출된 액체풀의 부피, 반경, 높이에 관한 연립방정식에 의해 지배되며, 주요 변수는 단위면적당 증발률, 누출시간, 누출량의 3 개 이다. 섭동법에 의한 해를 효율적으로 구하기 위하여 독립된 형태의 부피에 관한 2차 미분방정식을 얻었다. 이 새로운 지배 방정식은 기존의 방법에 비하여 매우 간단하게 해를 얻을 수 있게 한다. 섭동해의 결과, 동일한 누출량인 경우에 누출시간이 작으면 연속누출이 순간누출로 이어지는 혼합 형태의 누출이 되나, 누출시간이 크게 되면 연속누출 형태로만 존재하게 된다. 동일한 누출시간의 경우에는 누출량이 작으면 연속누출 형태로만 존재하지만, 누출량이 증가할수록 혼합형태의 누출로 된다. 이러한 2개의 영역을 분할하는 경계를 섭동해를 이용하여 해석적으로 제시함으로서 누출의 새로운 분류에 대한 명확한 근거를 제시 하였다.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제9권6호
• /
• pp.465-470
• /
• 2004

Optimal conditions for the in situ immobilization of lipase in aldehyde-silica packed columns, via reductive amination, were investigated. A reactant mixture, containing lipase and sodium borohydride (NaCBH), was recirculated through an aldehyde-silica packed column, such that the covalent bonding of the lipase, via amination between the amine group of the enzyme and the aldehyde terminal of the silica, and the reduction of the resulting imine group by NaCBH, could occur inside the bed, in situ. Mobile phase conditions in the ranges of pH $7.0{\~}7.8$, temperatures between $22{\~}28^{circ}C$ and flow rates from $0.8{\~}1.5\;BV/min$ were found to be optimal for the in situ immobilization, which routinely resulted in an immobilization of more than 70 mg­lipase/g-silica. Also, the optimal ratio and concentration for feed reactants in the in situ immobilization: mass ratio [NaCBH]/[lipase] of 0.3, at NaCBH and lipase concentrations of 0.75 and 2.5 g/L, respectively, were found to display the best immobilization characteristics for concentrations of up to 80 mg-lipase/g-silica, which was more than a 2-fold increase in immobilization compared to that obtained by batch immobilization. For tributyrin hydrolysis, the in situ immobilized lipase displayed lower activity per unit mass of enzyme than the batch-immobilized or free lipase, while allowing more than a $45\%$ increase in lipase activity per unit mass of silica compared to batch immobilization, because the quantity of the immobilization on silica was aug­mented by the in situ immobilization methodology used in this study.

• 전자공학회논문지
• /
• 제50권10호
• /
• pp.135-141
• /
• 2013

본 논문에서는 적색, 녹색, 청색의 세 가지 고휘도 LED를 하나의 소켓에 설치하여, 하나의 화소체 단위를 만들고, 이 화소체들의 조합과 다수 모듈들의 조합으로 문자, 그래픽, 동영상 등의 다양한 영상을 표출할 수 있는 풀컬러 전광판 모듈 및 제어장치를 개발하였다. LED 전광판 드라이버 모듈은 일정한 단위 면적에 RGB 픽셀을 조합한 도트에 드라이버 회로가 내장된다. 기존의 이러한 모듈형태는 특정 공간 및 설치 공간에 고정된 해상도를 구현하므로 가격이 높게 책정될 수 있다. 이러한 단점을 극복하기 위하여 임의의 피치 간격으로 배열이 자유로운 LED 드라이버 및 이에 따른 LED 픽셀 모듈을 개발하였다. 본 논문의 전광판 모듈은 기존 각각의 LED 모듈을 구동함에 있어서 병렬 방식의 데이터 처리 방식을 픽셀을 기준으로 그 위의 서브 모듈과 그 상위에 마스터 모듈의 개념을 도입하고 각각의 화소를 직병렬 통신 방식으로 개선함으로 인해서 처리할 수 있는 데이터의 속도를 초당 36프레임 이상으로 끌어올려서 상대적으로 데이터의 처리량이 많은 동화상의 경우에도 원활한 디스플레이를 할 수 있도록 하였다. 또한 기존 전광판의 깜박거림 현상이 개선되어 보다 선명한 영상이 제공되는 효과도 있다.

• 대한간호학회지
• /
• 제20권1호
• /
• pp.16-37
• /
• 1990

A cost analysis for hospitalized patients was carried out based upon Patient Classification System(PCS) in order to determine an appropriate nursing fee. The data were collected from 21 nursing units of three teaching hospitals from April 1 to June 30, 1989. first, all of the 22,056 inpatients were classified into mildly ill(Class Ⅰ), moderately ill(Class Ⅱ), acutely ill(Class Ⅲ), and critically ill(Class Ⅳ) by the PCS which had been carefully developed to be suitable for the Korean nursing units. Second. PCS cost accounting was applied to the above data. The distribution of inpatients, nursing costs, and nursing productivity were as follows : 1) Patient distribution ranged from 45% to class Ⅰ, 36% to class Ⅱ, 15% to class Ⅲ, and 4% to class Ⅳ, the proportion of class Ⅳ in ‘H’ Hospital was greater than that of the other two hospitals. 2) The proportion of Class Ⅲ and Ⅳ in the medical nursing units was greater than that of surgical nursing units. 3) The number of inpatients was greatest on Tuesdays, and least on Sundays. 4) The average nursing cost per hour was W 3,164 for ‘S’ hospital, W 3,511 for ‘H’ hospital and W 4,824 for ‘K’ hospital. The average nursing cost per patient per day was W 14,126 for ‘S’ Hospital, W 15,842 for ‘H’ hospital and W 21,525 for ‘K’ hospital. 5) The average nursing cost calculated by the PCS was W 13,232 for class Ⅰ, W 18,478 for class Ⅱ, W 23,000 for class Ⅲ, and W 25,469 for class Ⅳ. 6) The average nursing cost for the medical and surgical nursing units was W 13,180 and W 13,303 respetively for class Ⅰ, W 18,248 and W 18,707 for class Ⅱ, W 22,303 and W 23,696 for class Ⅲ, and W 24,331 and W 26,606 for class Ⅳ. 7) The nursing costs were composed of 85% for wages and fringe benefits, 3% for material supplies and 12% for overhead. The proportion of wages and fringe benefits among the three Hospitals ranged from 75%, 92% and 98% for the ‘S’, ‘H’, ‘K’ hospitals respectively These findings explain why the average nursing cost of ‘K’ hospital was higher than the others. 8) According to a multi- regression analysis, wages and fringe benefits, material supplies, and overhead had an equal influence on determining the nursing cost while the nursing hours had less influence. 9) The productivity of the medical nursing units were higher than the surgical nursing units, productivity of the D(TS) - nursing units was the lowest while the K(Med) - nursing unit was the highest in 'S' hospital. In ‘H’ hospital, productivity was related to the number of inpatients rather than to the characteristics of the nursing units. The ‘K’ hospital showed the same trend as ‘S’ hospital, that the productivity of the medical nursing unit was higher than the surgical nursing unit. The productivity of ‘S’ hospital was evaluated the highest followed by ‘H’ hospital and ‘K’ hospital. Future research on nursing costs should be extended to the other special nursing areas such as pediatric and psychiatric nursing units, and to ICU or operating rooms. Further, the PCS tool should be carefully evaluated for its appropriateness to all levels of institutions(primary, secondary, tertiary). This study took account only of the quantity of nursing services when developing the PCS tool for evaluating the productivity of nursing units. Future research should also consider the quality of nursing services including the appropriateness of nursing activities.