• Environmental Analysis Health and Toxicology
• /
• v.24 no.3
• /
• pp.219-229
• /
• 2009

The purpose of this study is to evaluate the skin whitening effect of Scirpi rhizama ethanol extract (SREE) in an animal model. For the experiment of the study, three brown guinea pigs weighing about 450 g to 550 g were exposed to ultraviolet-B rays on the backs at 500 $mJ/cm^2$ once a week, three consecutive weeks and the total quantity of light was 1,500 $mJ/cm^2$. The artificial tanning spots were divided into six different groups including normal (N), control (C), vehicle control (VC), positive control (PC), experimental 1 (E1, 1% SREE), experimental 2 (E2, 2% SREE) groups. Then, 30 ${\mu}L$ of SREE was transdermaly applied on the artificial tanning spots twice a day and 5 days a week for 8 weeks. With the result of a gross observation, it was found that the degree of pigmentation became apparently thinner in the group applied with E2, compared to the control or the vehicle control group. The melanin index of E2 group was significant lower than the control or the vehicle control group. In the observation with a light microscope, it was found that the degree of melanin pigmentation and S-100 protein expression considerably decreased in the groups applied with SREE, compared to the control or the vehicle control group. With the numerical analysis of melanin pigmentation and S-100 protein expression by using image-analysis software, it was found that the tendency was coincide with the results of microscopic observation.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.23 no.5
• /
• pp.396-405
• /
• 2001

Osseointegrated implants are used for the fixation of dental prosthesis with good long-term clinical results. In an attempt to improve the quantity and quality of the bone-implant interface, numerous implant modification have been used. Implants surface modifications have been used such as titanium-plasma sprayed, hydroxyapatite-coating, sandblasted, sandblasted and acid-etched, acid-etched. Rough surface implants have greater implant surface area and enhance the bone-implant interface and improve stabilization. The purpose of present study was to evaluate light microscopic and scanning microscopic examinations and removal torque value of newly developed calcium phosphate blast and acid-etched implant in the femur of rabbits. Titanium plasma sprayed(TPS) implant served as controls. After 12 weeks of healing of the femurs of 12 rabitts, the implant-containing segments of femur were removed on bloc and bone block including sections. Histologic examination and histomorphometric and removal torque values comparision were made for two implants. Obtained results are follows: 1. Newly developed calcium phosphate blasted and acid-etched implants were in close contact with bone under light microscopic examinations. 2. New implants showed mean bone-to implant contact 59.8%, whereas TPS implants showed mean bone-to implant contact 54.5% (statistically no difference p<0.05). 3. New implants showed mean bone density 56.7%, whereas TPS implants showed mean bone density 49.2% (statistically difference p<0.05). 4. New implants demonstrated mean removal torque values 40.5Ncm, whereas the mean removal torque values of TPS implants ranged 39.3Ncm. No statistical differences(p<0.05) were observed between two groups of implants nor was there any difference between the two implants at the clinical level.

• Journal of Korean Society of Forest Science
• /
• v.96 no.2
• /
• pp.178-182
• /
• 2007

Rauvolfia serpentina (L.) Benth. ex Kurz is a medicinal plant and an endangered tropical rainforest plant species. Since the field cultivation that aims to fulfill the industrial needs is never accomplished, tissue culture appears to be the most feasible way to improve the quality and quantity of R. serpentina. This experiment used two kinds of explants (roots and shoots) to induce optimal root formation in different combinations of auxin and photoperiod. Each explants exhibited different responses on given treatments. Differentiated root could be produced from explants cultured in IBA 20 mg/L with and without light. The highest number of roots, root length and root weight induced from shoot explants were effective on MS medium containing IBA 20 mg/L and incubated under dark condition, while highest total weight (callus and root) from root explants cultured on MS medium supplemented 10 mg/L IBA and 10 mg/L NAA and incubated under day length (11/13 hr). The root induced from shoot explants produced the highest major alkaloid content. The highest content of ajmaline (2.17 ppm fresh weight) and reserpine (1.30 ppm fresh weight) were observed in shoot explants cultured in MS medium containing combination of IBA 10 mg/L and NAA 10 mg/L and incubated under dark condition, yohimbine (1.47 ppm fresh weight) was in the shoot explants cultured in MS medium containing NAA 20 mg/L and incubated under day length, while serpentine was absent.

• Journal of Digital Convergence
• /
• v.11 no.4
• /
• pp.229-234
• /
• 2013

The purpose of this study is to develop a lighting apparatus of the illuminance and color temperature to maximize the ability of the optimal combination of light sources that can be controlled efficiently control device. Finding people comfortable feeling for indoor lighting that can be used in a variety of color temperature illumination area by combining light sensitivity can be realized. Lighting apparatus for fluorescent lamps with different color temperature of 2000K and 8000K, and by varying the quantity of each of the fluorescent lamps, the illuminance of lighting equipment and color temperature through optical simulations were evaluated. By infrared remote control receiver, divided into 5 types of relaxation, conversation, meeting, hospitality, arts and the lighting environment you want to transfer the PC0 ~ PC4 through the parallel port on the mode selected by the user at the receiving end the DC voltage output. EEFL inverter input DC voltage and the DC input voltage, depending on the level of EEFL dimming value (illuminance and color temperature) lighting environment you want to create change while using a PIR sensor EEFL automatically turn off if people do not have was developed so that the power consumption so you can save.

• Journal of Ecology and Environment
• /
• v.40 no.2
• /
• pp.89-106
• /
• 2016

Many plant species have two modes of reproduction: sexual and asexual. Both modes of reproduction have often been viewed as adaptations to temporally or spatially variable environments. The plant should adjust partitioning to match changes in the estimated success of the two reproductive modes. Perennial plants showed that favorable habitats in soil nutrients or water content tend to promote clonal growth over sexual reproduction. In contrast, under high light-quantity conditions, clonal plants tend to allocate more biomass to sexual reproduction and less to clonal propagation. On the other hand, plants with chasmogamous and cleistogamous flowers provides with a greater tendency of the opportunity to ensure some seed set in any stressful environmental conditions such as low light, low soil nutrients, or low soil moisture. It is considered that vegetative reproduction has high competitive ability and is the major means to expand established population of perennial plants, whereas cleistogamous reproduction is insurance to persist in stressful sites due to being strong. Chasmogamous reproduction mainly enhances established and new population. Therefore, the functions of sexual and asexual propagules of perennial or annual plants differ from each other. These traits of propagule thus determine its success at a particular region of any environmental gradients. Eventually, if environmental resources or stress levels change in either space or time, species composition will probably also change. The reason based on which the plants differ with respect to favored reproduction modes in each environmental condition, may be involved in their specific realized niche.

• Transactions of the Korean hydrogen and new energy society
• /
• v.27 no.2
• /
• pp.192-200
• /
• 2016

A characteristics of microwave drying-gasification was analyzed for converting a dewatered sewage sludge generated a wastewater treatment plant. Gas (60%) was the largest component of the product of microwave gasification, followed by sludge char (33%) and tar (2%). The main components of the producer gas were hydrogen (33%) and carbon monoxide (40%), and there was some methane and hydrocarbons ($C_2H_4$, $C_2H_6$, $C_3H_8$). Larger nitrogen and smaller oxygen amounts were generated. Gravimetric tar generated $414g/m^3$. This means a total tar which is a heavy hydrocarbons from the volatile organic substance in the sewage sludge. Selected light tars were benzene, anthracene, naphthalene, pyrene, showing lower concentrations as 2.62, 0.37, 0.49, $0.28g/m^3$, respectively. Sludge char has larger meso pores which is a mean pore size of $50.85{\AA}$ and has high adsorptivity. An amount of adsorption was $228.71cm^3/g$, showing higher quantity than acommercial adsorbers. This indicates that the gas obtained from the microwave gasification of wet sewage sludge can be used as fuel, but the heavy tar in the gas must be treated. Sludge char can be used as a tar reduction adsorbent in the process, and then burns as a solid fuel.

• Fashion & Textile Research Journal
• /
• v.15 no.1
• /
• pp.138-146
• /
• 2013

Chemical compositions and biological functions of brown colorants extracted from pine bark(Pinus densiflora) have been studied. Dyeing test using multifiber fabrics with extracted colorants were preliminary carried out. Dyeing conditions and fastness tests of selected fabrics have been also studied. The brown colorants were produced 1.5% concentrations by solvent extraction from milled pine bark using methanol. The colorants were extracted with 80% methanol as best choice by a criteria of solid quantity and dyeability on fabrics. The chemical compositions were identified as mixtures of taxifolin epicatechin and procyanidin by LC/MS analysis. The brown colorants could be dyed not only natural fibers such as cotton, silk and wool but also synthetic fiber as nylon and semi-synthetic fiber as viscose rayon. Maximum K/S values was shown at 400 nm according to different fiber with color appearance of redish brown. Optimum pH and temperature of dyeing conditions was 4 and above $80^{\circ}C$, respectively. The brown colorants had a strong antioxidant activity compared to Butylated hydroxyanisole as standard and weak antimicrobial activity against E. coli. compared to kanamycin. Washing, rubbing, perspiration, dry cleaning and light fastness for cotton, nylon and silk dyed with the brown colorants were carried out by KS K method. Most of color fastness such as washing, rubbing, perspiration, and dry cleaning were represented as 4-5 grade. However, light fastness was reported as 2-3 grade. From this studies, brown colorants produced pine bark have a high potentials for natural dyeing on fabrics with antioxidant activity.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.701-704
• /
• 2008

Actuality, amount of electric power is rising together with business expansion. But the most power plant is consisted a thermal power. People have been burning fuel like a coal, and it bring the cinder concrete. Fly-ash is use to the high-degree in construction material, but in case of bottom-ash had been disused the whole quantity. Intermittently, the academic world laid his studies for bottom-ash. Thus, this study contents are a characteristic of be not harden concrete incorporating fine aggregate, a strength of harden concrete, elastic modulus and a unit mass. And there do for the sake to examine utility value of bottom-ash and improve of light weight concrete.

• Journal of the Korean Society for Library and Information Science
• /
• v.32 no.3
• /
• pp.157-177
• /
• 1998

The 21st century will be the advanced Information society era. The management of very large quantity of electronic documents is important because new applications such as Digital Libraries, CSCW (Computer-Supported Cooperative Work) in Intranet, CALS (Commerce At the Light Speed) are emerging, which require the functionalities of efficient storing, searching and managing a bulk of electronic documents. SGML(Standard Generalized Markup Language) is an ISO Standard for representing structure information of electronic documents. This paper proposes an effective data model for storing and managing SGML documents. We also describe the design and implementation details of SGML document management system, which has capabilities of storing SGML instances, generating schema dynamically, and retrieving structure elements efficiently.

• Composites Research
• /
• v.22 no.6
• /
• pp.45-51
• /
• 2009

The marginal integrity at the composite resin-tooth interface has been analyzed in real time through acoustic emission (AE) monitoring during the polymerization shrinkage of composite resin subjected to the light exposure. It was found that AE signals were generated by the polymerization shrinkage. Most AE hit events showed a blast type signal having the principal frequency band of 100-200kHz. Bad bonding states were indicated by many hit events in the initial curing period of 1 minute with high contraction rate. The quantity of hit events for the human molar dentin specimen was much less than that for the steel ring specimen but more than that for the PMMA ring specimen. The better the bonding state, the less the AE hit events. The AE characteristics were related with the tensile crack propagation occurring in the adhesive region between the composite resin and the ring substrate as well as the compressive behavior of the ring substrate, which could be used for a nondestructive characterization of the marginal disintegrative fracture of the dental restoration.