• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.3
• /
• pp.195-200
• /
• 2008

To compress the moving picture data effectively, it is needed to reduce spatial and temporal redundancy of input image data. While motion estimation! compensation methods is effectively able to reduce temporal redundancy but it is increased computation complexity because of the prediction between frames. So, the study of algorithm for computation reduction and real time processing is needed. This paper is presenting quantizer effectively able to quantize DCT coefficient considering the human visual sensitivity. As quantizer that proposed DCT-based H.263 could make transmit more frame than TMN5 at a same transfer speed, and it could decrease the frame drop effect. And the luminance signal appeared the difference of $-0.3{\sim}+0.65dB$ in the average PSNR for the estimation of objective image quality and the chrominance signal appeared the improvement in about 1.73dB in comparision with TMN5. The proposed method reduces $30{\sim}31%$ compared with NTSS and $20{\sim}21%$ compared to 4SS in comparition of calculation quantity.

• Progress in Superconductivity and Cryogenics
• /
• v.18 no.1
• /
• pp.10-13
• /
• 2016

In this study, we developed a new volume reduction technique for cesium contaminated soil by magnetic separation. Cs in soil is mainly adsorbed on clay which is the smallest particle constituent in the soil, especially on paramagnetic 2:1 type clay minerals which strongly adsorb and fix Cs. Thus selective separation of 2:1 type clay with a superconducting magnet could enable to reduce the volume of Cs contaminated soil. The 2:1 type clay particles exist in various particle sizes in the soil, which leads that magnetic force and Cs adsorption quantity depend on their particle size. Accordingly, we examined magnetic separation conditions for efficient separation of 2:1 type clay considering their particle size distribution. First, the separation rate of 2:1 type clay for each particle size was calculated by particle trajectory simulation, because magnetic separation rate largely depends on the objective size. According to the calculation, 73 and 89 % of 2:1 type clay could be separated at 2 and 7 T, respectively. Moreover we calculated dose reduction rate on the basis of the result of particle trajectory simulation. It was indicated that 17 and 51 % of dose reduction would be possible at 2 and 7 T, respectively. The difference of dose reduction rate at 2 T and 7 T was found to be separated a fine particle. It was shown that magnetic separation considering particle size distribution would contribute to the volume reduction of contaminated soil.

• Journal of the Korea Institute of Building Construction
• /
• v.8 no.6
• /
• pp.107-115
• /
• 2008

Bearing wall apartments have been introduced to meet the needs of population growth in metropolis since 1980 in Korea. It is extremely difficult to remodel bearing wall apartments. Noises and vibrations generated between floors are also problems to solve. This paper introduces rahmen structures that enable easy remodel. Modularized Hybrid System(MHS) is demonstrated to be effective in terms of material quantity, construction costs, and amount of $CO_2$ emission compared with those of bearing wall structures. Housings with MHS composite girder ensure the flexibility of architectural plan and easy remodel while the floor heights are maintained the same as bearing wall structures. The reduction of the concrete and reinforcing steels tonnage decreased construction cost of MHS multi-residential housings. The $CO_2$ omission was also diminished in accordance with the reduction of construction materials. This paper describes new structural system adapting MHS frames to propose the extended life of residential housings and reduce the national resources by preventing unnecessary rebuilding of housings.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.4
• /
• pp.453-461
• /
• 2016

The paper represents the experimental analysis of the shock noise of medium caliber guns when a projectile is passed through the shielding material. In the study, the shielding material was constructed and tested in three separate experiments. The shielding material was not installed for medium caliber gun in Case 1. A medium caliber gun was fully covered with shielding material in Case 2, and another one was put with shielding material near muzzle in Case 3. In each experiment, the experimental data was compared with each other. Results showed the firing shielding material achieved a significant noise reduction in $90^{\circ}$ to the noise source. Case 3 is confirmed to be better effective than Case 2 in the near field. But, the noise reduction in the far field is small in quantity due to the low frequency. The paper is considered that further study is necessary for the shielding material which can absorb a low frequency noise in the future.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.6
• /
• pp.2485-2492
• /
• 2018

The rapid development of large-scale integrated circuits has brought great challenges to the circuit testing and diagnosis, and due to the lack of exact fault models, inaccurate analog components tolerance, and some nonlinear factors, the analog circuit fault diagnosis is still regarded as an extremely difficult problem. To cope with the problem that it's difficult to extract fault features effectively from masses of original data of the nonlinear continuous analog circuit output signal, a novel approach of feature extraction and dimension reduction for analog circuit fault diagnosis based on wavelet packet decomposition, local linear embedding algorithm, and clone selection algorithm (WPD-LLE-CSA) is proposed. The proposed method can identify faulty components in complicated analog circuits with a high accuracy above 99%. Compared with the existing feature extraction methods, the proposed method can significantly reduce the quantity of features with less time spent under the premise of maintaining a high level of diagnosing rate, and also the ratio of dimensionality reduction was discussed. Several groups of experiments are conducted to demonstrate the efficiency of the proposed method.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.54 no.2
• /
• pp.157-166
• /
• 2012

Most of the roads are paved with impermeable materials such as asphalt concrete and cement concrete, and in the event of heavy rainfall, rainwater directly flows into river through a drainage hole on the pavement surface. This large quantity of rainwater directly spilled into the river frequently leads to the flooding of urban streams, damaging lowlands and the lower reaches of a river. In recent years there has been a great deal of ongoing research concerning water permeability and drainage in pavements. Accordingly, in this research, a porous polymer concrete was developed for permeable pavement by using unsaturated polyester resin as a binder, recycled aggregate as coarse aggregate, fly ash and blast furnace slag as filler, and its physical and mechanical properties were investigated. Also, 3 types of permeable polymer block by optimum mix design were developed and rainfall runoff reduction effects by permeability pavement using permeable polymer block were analyzed based on hydraulic experimental model. The infiltration volume, infiltration ratio, runoff initial time and runoff volume in permeability pavement with permeable polymer block of $300{\times}300{\times}80$ mm were evaluated for 50, 100 and 200mm/hr rainfall intensity.

• The Journal of Fisheries Business Administration
• /
• v.42 no.1
• /
• pp.37-55
• /
• 2011

This study is to examine the economic effects of seaweed forest creation project in the case of Jeju Woodo Seokwang－ri. Seaweed forest creation project will raise up the quality and quantity of coastal fisheries resource and improve the structure of coastal ecosystem as a project the recovery of coastal fisheries resource against barren ground like whitening event. The economic effect by seaweed forest creation project can be found not only in the income increase of fishermen but also in reduction of carbon dioxide. The results of this study are summarized as follows: First, the income increase effect of fishermen has economic value of 26,945 thousand won under a 30-year cash flow based on a 8.5% discount rate. This suggests that the seaweed forest creation project increases income of fishermen. Second, the reduction effect of carbon dioxide has economic value of 1,083 thousand won per year. This indicates that the seaweed forest creation project reduces carbon dioxide. In conclusion, the results of this study suggest the seaweed forest creation project has economic value in the case of Jeju Woodo Seokwang-ri.

• Culinary science and hospitality research
• /
• v.23 no.8
• /
• pp.17-26
• /
• 2017

This study compared and analyzed the importance-satisfaction regarding the selection attributes of the convenience store focusing on PB lunch box for consumers of 20s and 30s. According to the research results, the importance of factors such as easy purchase, time reduction, convenient intake were found to be high among the selection attributes of the convenience store PB lunchbox and those of factors such as confirmation of food ingredients, nutrition, and new taste were found to be relatively low. In addition, factors with high satisfaction included easy purchase, convenient intake, time reduction, while factors with low satisfaction were confirmation of food ingredients, nutrition and hygiene. The results of the IPA analysis were as follows: The $1^{st}$ quadrant (Keep up the good work) included convenience, time reduction, easy purchase, convenient intake, convenient cooking method, and convenient packing container Etc. $2^{nd}$ quadrant (possible overkill) includes origin labeling and the 3rd quadrant (low priority) includes packing container design, convenient storage, consistency of quality and taste, good taste, moderate amount, new taste, one meal, moderate quantity and quality, inexpensive intake, and hygiene Etc. $4^{th}$ quadrant was found to include no corresponding factors.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.780-783
• /
• 2004

Recently Intake noise has been extensively studied to reduce the engine noise. In order to diminish intake noise several resonators were added to the intake system. However this can cause a reduction of engine output power and an increase of fuel consumption. In this study, active noise control simulation of the Filtered-x LMS algorithm is applied real instrumentation intake noise data under rapid acceleration because intake noise is more excessively increased under the such a harsh condition. But the FXLMS algorithm has poor control performance when the system is disturbed. Thus modified FXLMS algorithm using L-point running average filter is developed to improve the control performance under the rapid acceleration and disturbance. The noise reduction quantity of modified Filtered-x LMS algorithm is more than original one in two cases. In the case of control for real instrumentation intake noise data, maximum residual noise of modified FXLMS algorithm is 2.5 times less than applied the FXLMS and also in the case of disturbed, the modified FXLMS algorithm shows excellent control performance but FXLMS algorithm cat not control.

• Resources Recycling
• /
• v.11 no.4
• /
• pp.37-43
• /
• 2002

As the consumption of galvanized steels in cans and automobiles and the quantity of scraps increase, the recycling problems of EAF dust become a important problem. Valuable metals such as Fe, Zn, Pb are of continued interest to metallurgists. To recover the valuable metal and to remove the toxicity of EAF dust, high temperature smelting process is or researching as a pilot scale. The Reduction kinetics of Zn in EAF dust is so important in a view of the economic consideration of the process. In this study, the kinetics behavior of Zn in EAF dust were measured as a point of application in high temperature smelting process. The rate control step in ZnO and franklinite is revealed to be chemical reaction on the reaction surface.