• 복식
• /
• 제59권8호
• /
• pp.49-65
• /
• 2009

As basic materials in this research, 874 pieces of engraving that recorded the garment produced by diverse authors in the 17-18th century were collected among the collections of male and female garment in the engraving kept by National Library of France and 216 pieces of engraving were classified among them to observe justaucorps as stated in the materials. Since type of justaucorps in the 18th century can be classified by difference in shape and change through the above engraving materials in large quantity and the shape and composition can be compared and analyzed with other materials such as picture, stored garment, written materials without difficulty, the chronology can be composed by single type of justaucorps. Intending to understand the change in composition caused by type classification and pattern making as per analysis of type property of justaucorps, the men's upper garment in France in the 18th century. Checking change in design per from and materials, justaucorps of 1680-1700s was in silhouette where waist in the length above knee was adhered and slightly spread to lower part. In the type of 1710-1750s, waist adhered remarkably and many pleats were made under waist to produce volume of form that spread to lower part like skirt. In the type of 1760-1780s, straight silhouette was attached to whole body and end of front adjustment in slant line turns to rear part. The developmental aspect of construction can be checked by making pattern. Changing the cutting line of body plate to smoothly connect section and to try to adhere to the body, the development of simpler and delicate pattern production technique was confirmed.

• 한국전자통신학회논문지
• /
• 제14권4호
• /
• pp.743-754
• /
• 2019

지표면 침식 잠재력은 비가 내린 영향으로 토양에 전달 된 운동 에너지로 평가할 수 있다. 충격 신호를 분석할 수 있는 디즈드로미터로 우적 에너지율 관계식을 산출하였다. 대륙 강수의 97%와 해양 강수의 95%가 강우량과 강우율의 관계로 이루어진 이 지수 방정식으로 설명되었다. 이 관계식의 지수는 강우 유형에 의존하지 않지만 계수는 강우 사건에 따라 조정될 수 있는 변동을 나타냈다. 이 관계식은 결정 계수, 평균 절대 오차 및 신뢰 오차에 의해 검증되었다. 특정 유형의 토양과 관련된 강수의 운동 에너지는 강우로 인한 침식의 가능성을 결정할 수 있다.

• 산업경영시스템학회지
• /
• 제44권1호
• /
• pp.45-50
• /
• 2021

Machines and facilities are physically or chemically degenerated by continuous usage. The representative type of the degeneration is the wearing of tools, which results in the process mean shift. According to the increasing wear level, non-conforming products cost and quality loss cost are increasing simultaneously. Therefore, a preventive maintenance is necessary at some point. The problem of determining the maintenance period (or wear limit) which minimizes the total cost is called the 'process mean shift problem'. The total cost includes three items: maintenance cost (or adjustment cost), non-conforming cost due to the non-conforming products, and quality loss cost due to the difference between the process target value and the product characteristic value among the conforming products. In this study, we set the production volume as a decreasing function rather than a constant. Also we treat the process variance as a function to the increasing wear rather than a constant. To the quality loss function, we adopted the Cpm+, which is the left and right asymmetric process capability index based on the process target value. These can more reflect the production site. In this study, we presented a more extensive maintenance model compared to previous studies, by integrating the items mentioned above. The objective equation of this model is the total cost per unit wear. The determining variables are the wear limit and the initial process setting position that minimize the objective equation.

• 대한환경공학회지
• /
• 제33권7호
• /
• pp.523-529
• /
• 2011

본 연구는 MBT시스템과 연계된 호기성안정화장치에서 입경 크기가 안정화에 미치는 영향을 검토하기 위하여 실시되었다. 반응기내 생분해성 폐기물(음식물류 폐기물 60%, 종이류 폐기물 25%, 목재류 폐기물 2% 및 퇴비 5%)을 동일한 조성으로 충전하고, 각각의 입경을 5 mm, 10 mm, 20 mm, 50 mm, 100 mm 및 미선별 등으로 조절하여 충전한 후에 안정화 정도를 비교분석하였다. 실험결과 온도변화에서는 50 mm 이하의 입경에서 최고 온도가 $65^{\circ}C$ 이상을 보였으며, 100 mm와 미선별 반응기에서는 최고온도가 약 $50^{\circ}C$를 보였다. $CO_2$ 가스의 발생량은 입경의 크기에 따라 발생량이 비례하는 현상이 관찰되지 않고, 오히려 100 mm 이상에서 높은 발생량을 보였다. 반응과정중 습윤 및 건윤기준의 무게변화는 입경 크기가 가장 작은 5 mm에서 각각 30% 및 46%의 감소율을 보였으며, 입경이 클수록 감소율이 낮아지는 경향을 보였다. 물용출 $COD_{Cr}$ 및 TOC는 입경 크기가 50 mm 이하인 반응기에서는 반응초기 대비 감소율이 약 80%로 나타난 반면 입경이 100 mm 및 미선별 반응기에서는 약 60%의 감소율을 나타내었다. 이러한 결과로부터 생분해성 폐기물의 입경이 작을수록 유기물의 분해율이 높아져 생분해성 물질의 분해 안정화가 촉진되는 것으로 나타났으며, 가능한 50 mm 이하로 입경을 조절하여 반응시키는 것이 필요한 것으로 나타났다.

• International Journal of Quality Innovation
• /
• 제8권3호
• /
• pp.156-172
• /
• 2007

The high-tech industry is the economic lifeline for Taiwan. Its characteristics are short product life cycle, rapid changes in the market, and a high obsolescence rate for new products. Under globalization, the high-tech industry has adopted Information Technology (IT) to shorten the manufacturing process, reduce costs and conduct product research and development (R&D) to increase the core competence of enterprises and achieve the goal of sustainable operations. Enterprises should actively strengthen their integration with internal and external resources and lead in R&D management to increase industrial operating performance. Effectively managing operations and R&D management evaluation in Taiwan's High-tech Industry has become a critical subject. This study adopted 4 major Balanced Scorecard (BSC) perspectives to establish the Total Performance Evaluation Indicators for the R&D management department in Taiwan's High-tech Industry. The Analytic Network Process (ANP) was applied to evaluate the overall performance of the R&D management department. The research framework is divided into 2 phases. The first phase is combined with the 4 major perspectives, Financial, Customer, Internal Business Process and Learning and Growth, as the related indicators for each measurement perspective. The Key Performance Indicators (KPI) were selected using Factor Analysis to identify the key factor from the complicated indicators. The relationship between the characteristics of each BSC's evaluation perspective is dependence and feedback. This study applied ANP to conduct the calculation and adjustment of correlation between each KPI, and determine on their relative weights for the objective KPI. The "Financial Perspective" for R&D management department in Taiwan's High-tech Industry focused on the budget achievement rate of R&D management. The weight indicator value is (0.05863). The "Customer Perspective" focused on problem-solving satisfaction. The weight value of this indicator is (0.17549). The "Internal Business Process Perspective" focused on the quantity and quality of R&D. The weight value of this indicator is (0.13506). The "Learning and Growth Perspective" focused on improving competence in the research personnel's professional techniques. The weight value of this indicator is (0.02789). From the total weighting indicators, the order of the Performance Indicators for the R&D management department in Taiwan's High-tech Industry is: (1) Customer Perspective; (2) Internal Business Process Perspective; (3) Financial Perspective; and (4) Learning and Growth Perspective.

• 벤처창업연구
• /
• 제12권5호
• /
• pp.39-53
• /
• 2017

본 연구는 농촌흡인요인, 귀농준비정도, 귀농지 주거환경, 귀농 지원정책이 귀농만족도에 미치는 영향에 관해 가족요인을 조절효과로 반영하여 연구하였다. 이는 농촌으로 이주율이 증가하고, 귀농에 대한 관심이 증대 되는 시점에 농촌흡인요인, 귀농준비정도, 귀농지 주거환경, 귀농 지원정책이 귀농만족도에 유익한 영향을 미치는지와 독립변수로 제시된 농촌흡인요인, 귀농준비정도, 귀농지 주거환경, 귀농 지원정책과 종속변수인 귀농만족도 간에 가족요인 조절효과를 분석하여, 귀농만족도에 영향을 미치는 변수들을 규명하는데 그 목적이 있다. 본 연구를 위해서 귀농인을 대상으로 한 설문조사를 진행하였고, 최종적으로 237개의 유효한 설문지를 수집하였다. 수집된 자료는 인구통계학적 특성을 통제변인으로 하는 다중회귀분석을 진행하였고 가족요인 조절효과는 조절회귀 분석을 실시하였다. 분석결과는 다음과 같다. 농촌흡인 요인 중 경제적 요인이 높을수록 귀농 만족도가 높아지는 것으로 나타났고, 귀농준비정도에서는 작목준비가, 귀농지 주거환경에서는 안전성, 귀농지원정책에서는 창농지원이 귀농만족도에 정(+)의 영향을 미치는 것으로 나타났다. 가족요인의 조절효과 분석결과 경제적 요인, 작목준비, 편리성과 귀농만족도 간에 가족요인의 조절 효과가 나타났다. 이러한 연구를 통해, 귀농만족을 높이고 도시로의 재 이주율을 줄이기 위해 귀농정책의 적극적인 지원과 귀농지의 안정성 그리고 귀농흡인 요소에서 경제적인 이익이 증대시키는 것이 무엇보다 중요하다는 결론을 도출하였다.

• 터널과지하공간
• /
• 제14권5호
• /
• pp.327-338
• /
• 2004

본 연구에서는 터널의 안정성을 정량적으로 평가하기 위해 지반과 지보재의 파괴를 고려한 터널의 안전율에 대한 개념을 정립하고, 안전율을 계산하는 수치해석기법을 정립하고자 하였다. 안전율을 구하기 위해서 지반이 파괴될 때까지 지반의 강도를 감소시켜가며 반복적으로 해석을 수행하는 전단강도 감소기법을 사용하여 지반의 파괴 및 이에 따른 지보재의 파괴를 고려하여 측압계수 및 암반등급에 따른 터널의 안전율을 구하였다. 이 방법을 사용하면 파괴 활동면을 미리 가정하지 않아도 안전율과 파괴 활동면을 동시에 구할 수 있다. 수치해석은 유한 차분법에 기초를 둔 지반해석 프로그램인 FLA $C^{2D}$(ver 3.3)을 사용하였으며, 해석 결과로부터 소성영역의 분포와 지보재의 응력분포를 확인하였다. 해석 결과 양호한 1등급과 2등급의 암반에서는 안전율이 높게 나타났으며, 암반등급이 저하될수록 안전율은 낮게 계산되었다. 또한 측압계수 0.5인 경우가 측압계수 2.0인 경우보다 안전율이 더 크게 확보되는 것으로 나타났다. 본 연구에서 정의된 안전율은 터널의 안정성을 나타내는 정량적 지표로 사용될 수 있음을 확인하였으며. 소성영역, 숏크리트 응력, 록볼트 축력을 검토함으로써 터널에 설치되는 지보재의 양과 설치 위치를 조정하는데 도움이 될 수 있을 것으로 판단된다.다.

• Strategy21
• /
• 통권41호
• /
• pp.261-293
• /
• 2017

Nuclear power is a way of attaining an enormous amount of energy with relatively small amount of resources and after it has been introduced to the submarine since 1954, there are approximately 150 of nuclear powered submarine currently on a mission around the world. This is due to the maneuverability, mountability and covertness of nuclear submarines. However, there are other tasks, not only the high level of nuclear technology that are needed to be dealt with in order to construct nuclear powered submarine. The biggest task of all is to secure the enriched uranium. Accordingly, this research is about the way of enriching and securing the nuclear fuel that are used in the nuclear submarine with the characteristics, merits and demerits of the nuclear submarine. Due to the fact that the pressurized water reactor in South Korea is the reactor that was originally built for the development of nuclear powered submarine, many parts is designed to be suitable for the submarine propulsion. However, in order to apply this to submarine it is needed to consider additional requests such as the position of reactor, accident-coping system, radioactive covering, reactor output adjustment and ship's pitch and roll in order to apply this to submarine. Nuclear submarines have much higher speed based on the powerful propulsion in comparison with diesel-electric submarine and also have bigger loading area. Besides, there is no need to snorkel and they also have advantages in covertness with the multi-noise proof system. The nuclear technology in South Korea has seen the dramatic development since 1962 and in 1998 reached to the level that we have succeeded in the localization of nuclear plant and exported the world-class one-piece small-sized reactor (SMART) to UAE. To operate these reactors, we import the whole quantity of low-enriched uranium and having our own uranium enrich facility is not probable because of the budget and international regulations. With the ROK/US nuclear agreement revised on 2015 November, the enrichment of uranium that are available without special permission has changed up to 20%. According to the assumption that we use the 20% enrichment of Uranium on U.S. virginia class submarine, it is necessary to change the fuel after 11 years and it will cause additional cost of 1 billion dollars. But the replace period by the uranium's enrichment rate is not fixed so that it is possible to change according to the design of reactor. Therefore, I would like to make a suggestion on two types of design concepts of nuclear submarine that can be operated for 30 years without nuclear fuel change by using the 20% enriched uranium from ONNp.First of all, it is possible by increasing the size of reactor by 3 times and it results in the 1,000t increase of the weight. And secondly, it is by designing the one piece reactor to insert devices such as steam turbine, condenser into the inside of nuclear core like the Rubis class submarines of France.

• 한국환경복원기술학회지
• /
• 제5권5호
• /
• pp.58-66
• /
• 2002

We present a planting plan of the buffer-forest belts created at the boundary area of the waste landfill site which is located in the coastal area of Kyubg-Gi province. In order to form a proper section of ground soil excavated from the sea and a forest which shows a distinction of the vegetation stratification, the planting plan with trees, sub-trees, shrubs, and seedlings (produced at a sprout cultivation place) is devised with an adjustment of planting density. 1. The preparation of mounding is required for planting at a waste landfill site. We first estimate an economical and efficient banking height together with the quantity of soil, and prepare a planting ground with excavated ground soil for the consideration of soil recycling. On the planting ground a banking with a height of 1.5-2m is produced by self-supported soil, playing a role in a salt blocking and an irritation layer of planting. Finally, an additional banking with a height of 2m is produced by qualified vegetation soil, forming a vegetation section with a total height of 6m. 2. Since the planning site is located in the border, the planting area is composed of two regions : one is an inclined face (slope 1 : 3) toward the inside of the landfill site and the other is an inclined face (slope 1 : 4) toward the inland. The buffer planting in the former (latter) region consists of wind break forest (mixed-landscape forest) within a width of less than 35m. 3. Based on the data obtained from the literatures and the investigation of local plants, we choose the 21 plant species (such as Pinus thunbergii, Pinus densiflora, Sorbus alnifolia, Albizzia julibrissin and etc.) and the additinal 7 species which are grown at a sprout cultivation palce of the SUDOKWON landfill site (Rosa rugosa, Quercus acutissima, Prunus armeniaca var. ansu., and etc.). Sub-trees with a height of above 2.5m and seedlings are planted with an interval of $1.5{\times}1.5m$ ($0.45roots/m^2$) and $0.5{\times}0.5m$ ($4roots/m^2$), respectively. Here, both trees exhibit communities planting with more than three rows. Shrubs are planted with $9-16roots/m^2$, depending on their size. Since this case study provides a reference of the planting beds as well as a planting plan at the SUDOKWON landfill site, it is not sufficient for the present plan to be utilized for the formation of buffer-forest belts which are used for the analysis of environmental factor and the reduction of environmental pollutants in the sea waste landfill site. Thus, further studies with the ecological basis are demanded for the environment planting restoration in the sea waste landfill site.

• 한국터널지하공간학회 논문집
• /
• 제21권3호
• /
• pp.363-375
• /
• 2019

복층터널은 도심지에서 대심도로 시공되는 특성이 있으므로 복층터널용 수직구는 급기 및 배기구, 대피통로 계단, 엘리베이터, 배전시설, 접속터널 등의 설치공간의 확보가 필요하다. 또한 복층터널용 수직구는 도심지에 시공되는 특성상 공사영향 최소화를 위하여 터널굴착 완료 후 수직구 내부 콘크리트 구조물의 급속시공이 필요하다. 따라서 수직구 내부 슬래브 및 계단용 콘크리트 시공의 프리캐스트화가 필요하며 이러한 수직구 내부 프리캐스트 구조물 지지를 위한 브래킷의 급속시공기술이 필요하다. 브래킷 형태 사례조사 결과 현장타설 방식, 프리캐스트 방식, 철재브래킷 방식 등이 있는데 본 연구에서는 시공속도 향상을 고려하여 경제성이 양호하고 시공성이 우수한 철재브래킷을 개선한 새로운 브래킷에 대하여, 직선형 매립 앵커볼트와 꺾임형 매립 앵커볼트에 대한 구조성능시험결과 소요하중 지지능력을 확보하는 것을 확인하였고 꺾임형 매립 앵커볼트의 하중지지능력이 보다 큰 것을 확인하였다.