• KIEAE Journal
• /
• v.15 no.5
• /
• pp.113-118
• /
• 2015

Purpose: In Korea, buildings make up 20.5% (2012) of the gross national energy consumption, so they are a major target for greenhouse gas reduction. In particular, energy consumption in multihousing represents approximately 32.6% of the entire building sector. With improving energy performance being the focus, efforts are continuously being made to reinforce standards and systems in greenhouse gas reduction. This study investigated the current status of multihousing in Korea in terms of energy performance as described in the performance evaluation reports submitted (to an institution that specializes in reviewing the performance evaluation of green homes) based on the construction criteria and performance codes for green homes and examined if the evaluation criteria using related methodologies were appropriate. The results will provide helpful information for reviewing the future directions of operations and amendments to the systems. Method: The overall characteristics of the system were examined using the evaluation methodologies (and current state of revisions) of the performance codes for green homes and comparing them with similar systems. Also, the current state of application and energy performance (conducted according to the evaluation methodologies) were compared by the evaluation institution for multihousing neighborhoods that were assessed for five years from 2010 to 2014. Result: It has been confirmed that the performance codes for green homes are different from other similar systems in evaluating performances of multihousing in that they allow both quantitative and qualitative methods of evaluation, and they consider both energy and sustainability simultaneously in the evaluation. Furthermore, regarding the adoption rate of the forms for the two evaluation methods (Form 1 - quantitative and Form 2 - qualitative), the rate preferring Form 2 increased gradually in time to reach 55.3% in 2014. In analyzing the rate of overall energy reduction (submitted in Form 1) and the coefficient of thermal transmission for each part (submitted in Form 2), it was observed that the deviation between the performance submitted and the criteria decreased in line with the level of reinforcement.

• Journal of the Korean Institute of Gas
• /
• v.18 no.3
• /
• pp.44-52
• /
• 2014

Small petrol stations have great potential for a wide distribution in metropolitan area in which the land value possesses primary installation cost of the facility. The objective of the present study is to propose appropriate facility regulations of small petrol stations in Korea that can be popularly installed in the future in terms of securing safety in addition to serviceability. The hazard analysis and damage prediction from the possible fire and explosion accidents were performed using a software, PHAST v.6.5. As essential components of the facility regulations proposed in this study, the regulations about the refueling lot, maximum capacity of underground tank, location of fixed refueling facilities, height of firewall for small petrol stations were subsequently compared with those for regular-sized petrol stations.

• Archives of design research
• /
• v.20
• /
• pp.51-58
• /
• 1997

This paper aims to aid a practical evaluation for screening out the design proposais under applying the IRDS system, which is developed a computer aided industrial design system as a computer application system. In this study, the author adopted 3 evaluation methods with criteria which have quantitative and qualitative attributes : the Intuitive Evaluation Methods(X), the Accumulative Evaluation Method(Y), the Benchmarking Evaluation Methods(Z). The results show that the 3 Methods have reciprocal relationships under reliability(r=0.0001). In analysis on the properties of the evaluation methods, the Evaluation Method (X) shows rapidity especially, the Evaluation Method (Y); relativity, the Evaluation Method(Z); importance respectively. The correlation analysis between the evaluation methods makes the null hypothesis denying, then we could adapt the research hypothesis. Therefore the correlation between them has positive relationship, and it shows thicker than the result of the 1st study.

• Tunnel and Underground Space
• /
• v.25 no.2
• /
• pp.210-219
• /
• 2015

This paper describes a new quantitative process for evaluating the roughness of discontinuity, which is suggested as a qualitative criteria in RMR or Q-system. For this purpose, the Delphi method which is one of the surveying methods was introduced. The selected panels were asked to evaluate the roughness of discontinuities on the Web which was hosted by authors in advance. A total of 3 surveys were performed using JRCs suggested by Barton and Choubey as well as Ai generated by the Monte Carlo simulations. After each survey, the results were provided to all panels for comparing their decisions to others. As surveys proceeded, better consensus and convergence were achieved. With a good agreement of panels on roughness classification, the quantitative criteria for roughness of discontinuity in RMR and Q-system was established in this study.

• Food Science of Animal Resources
• /
• v.35 no.5
• /
• pp.674-682
• /
• 2015

The objective of this study was to evaluate the risk of illness from Campylobacter spp. on ham. To identify the hazards of Campylobacter spp. on ham, the general characteristics and microbial criteria for Campylobacter spp., and campylobacteriosis outbreaks were investigated. In the exposure assessment, the prevalence of Campylobacter spp. on ham was evaluated, and the probabilistic distributions for the temperature of ham surfaces in retail markets and home refrigerators were prepared. In addition, the raw data from the Korea National Health and Nutrition Examination Survey (KNHNES) 2012 were used to estimate the consumption amount and frequency of ham. In the hazard characterization, the Beta-Poisson model for Campylobacter spp. infection was used. For risk characterization, a simulation model was developed using the collected data, and the risk of Campylobacter spp. on ham was estimated with @RISK. The Campylobacter spp. cell counts on ham samples were below the detection limit (<0.70 Log CFU/g). The daily consumption of ham was 23.93 g per person, and the consumption frequency was 11.57%. The simulated mean value of the initial contamination level of Campylobacter spp. on ham was −3.95 Log CFU/g, and the mean value of ham for probable risk per person per day was 2.20×10⁻¹². It is considered that the risk of foodborne illness for Campylobacter spp. was low. Furthermore, these results indicate that the microbial risk assessment of Campylobacter spp. in this study should be useful in providing scientific evidence to set up the criteria of Campylobacter spp..

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.19 no.3
• /
• pp.383-391
• /
• 2012

Purpose: The purpose of this study was to identify the trends in research studies published in Journal of Korean Academy of Fundamentals of Nursing from 2009 to 2011. Methods: A total of 156 studies published between 2009 and 2011 were reviewed using analysis criteria developed by the researchers. Results: Quantitative studies accounted for 90.4% and qualitative studies, 8.3%. The research designs for the quantitative studies were experimental, 28.0% and survey, 63.8%. IRB approval was received for only 25.6% of the studies and 61.0% of studies presented participant criteria. Questionnaires were used for data collection in 90.8% of studies. Individual or group education was the most frequent intervention in the experimental studies. Conclusion: The results indicate that more randomized controlled trials with a low risk of bias are needed to support greater evidence-based nursing practice. Considering the low rate of ethical consideration, it is important that stricter application of research methods needs to be encouraged to improve the quality of Journal of Korean Academy of Fundamentals of Nursing.

• Journal of Korean Academy of Nursing
• /
• v.37 no.6
• /
• pp.1013-1019
• /
• 2007

Purpose: This study was to determine the current trend of nursing research as exploring both quantitative and qualitative methodologies, and to provide the explicit direction to improve the quality of published papers. Methods: Total of 366 articles published between 2004 and 2006 was reviewed using the criteria of analysis. Results: There was more number of quantitative studies than qualitative studies. More studies were conducted with subjects who had health problems, and studies that targeted women and elderly population have been significantly increased. In quantitative methodology, utilization of experimental and quasi-experimental designs has been increased, however descriptive study was dominant as yet. In qualitative methodology, studies using grounded theory and phenomenology were frequently published. It was noted that theoretical framework and rational for sample size were rarely presented in quantitative study. Philosophical position and the process of preparation for study, which guided the research, were not clearly described in qualitative study. Conclusion: The findings of this review suggest that published studies have been improved and diversified, however, detailed and clear evaluation tool that assesses study process and method should be developed as a way to further improve the quality of published papers.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.4
• /
• pp.1863-1871
• /
• 2012

Utilization of the former OSS was mainly focused on the usage of system applications such as operating system and DBMS. However, nowadays many companies are trying to make use of OSS based on the application rather than the system software. However, selection of base OSS is the most important to develop of application for utilizing OSS. The scope of existing OSS evaluation studies is covered the entire OSS quality. Thus existing studies of evaluation of OSS selection is insufficient. Also, the result of assessment is based on qualitative measurement rather than quantitative ones. In this paper, we derives only the indicators for selection among the existing OSS assessment indicators and suggests the assessment indicator that is capable of quantitative assessment in accordance with the characteristics of the project. The proposed assessment indicator is divided into an initial assessment indicator that can be assessed with only the information within the OSS community, and the detailed assessment indicator through metrics to make quantitative measurements possible. In this way, an objective basis can be provided through quantitative scores & indicators when selecting OSS.

• Journal of the Korean Society of Safety
• /
• v.33 no.5
• /
• pp.141-149
• /
• 2018

In a PCB factory, there is a corrosive chemical substance supply system that can causes major leakage accidents. These accidents can give rise to shut down the factory and do residents damage that cause enormous loss of properties. To mitigate these risks, it is necessary to provide a chemical disaster prevention system. Moreover, after considering the situation and environment of the production site, it is of great importance to build an optimal chemical accident prevention system by reflecting risk reduction measures from the point of process design and by assessing quantitative risk based on reliability data. However, because there was no established database of the reliability about facilities and equipment that can be used in the domestic, the business site and consulting organization had being used the reliability data such as USA CCPS(Center for Chemical Process Safety). In these days, Korean institutes are studying on reliability data utilization method of quantitative risk assessment for preventing chemical accidents and domestic utilization algorithms and storage bed of reliability data. This study presents samples of reliability database about the chemical substance supply system that constructed from the history data such as failure, maintenance for 10 years at a PCB factory. Also, this work proposes the safety design criteria for supply facilities of corrosive chemical substance by assessing quantitative risk on the basis of the reliability data.

• Fire Science and Engineering
• /
• v.30 no.5
• /
• pp.116-123
• /
• 2016

The quantitative risk assessment methods for thermal failure in targets were studied using fire modeling. To this end, Fire Dynamics Simulator (FDS), as a representative fire model, was used and the probabilities related to thermal damage to an electrical cable were evaluated according to the change in fire area inside a specific compartment. 'The maximum probability of exceeding the damage thresholds' adopted in a conservative point of view and 'the probability of failure' including the time to damage were compared. The probability of failure suggested in the present study could evaluate the quantitative fire risk more realistically, compared to the maximum probability of exceeding the damage thresholds with the assumption that thermal damage occurred the instant the target reached its minimum failure criteria in terms of the surface temperature and heat flux.