• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.428-428
• /
• 2018

지역빈도해석은 대상 지점의 관측자료만을 사용하는 지점빈도해석과 달리 지역구분을 통해 정의된 동질지역 내에 포함된 모든 지점의 자료를 사용하여 보다 정확하고 신뢰할 수 있는 확률수문량을 산정할 수 있는 방법이다. 지역빈도해석의 절차는 크게 지역구분인자를 이용한 동질지역구분과 홍수지수모형의 적용을 통한 확률강우량 산정으로 나눌 수 있다. 본 연구에서는 지역구분에 사용되는 지역구분인자가 지역빈도해석의 확률강우량 산정에 미치는 영향을 알아보기 위하여 지역구분인자와 확률강우량 산정결과와의 상관성을 분석하고자 한다. 먼저, 동질지역 구분을 위해 지형적 특성과 수문학적 특성을 나타내는 지역구분인자를 선정하였으며, 군집분석을 통해 동질지역 구분을 수행하였다. 구분된 동질지역에 대해 지역성장곡선을 추정하고 홍수지수모형을 통해 지점별 확률강우량을 산정하였다. 지역빈도해석을 통해 산정된 확률강우량의 지점빈도해석 대비 증감률과 동질지역구분에 사용된 지역구분인자와의 상관성분석을 통해 지역빈도해석의 확률강우량 산정에 영향을 주는 지역구분인자를 확인하였다.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.44 no.3
• /
• pp.117-124
• /
• 2021

The development of IOT technology and artificial intelligence technology is promoting the smartization of manufacturing system. In this study, data extracted from acceleration sensor and current sensor were obtained through experiments in the cutting process of SKD11, which is widely used as a material for special mold steel, and the amount of tool wear and product surface roughness were measured. SVR (Support Vector Regression) is applied to predict the roughness of the product surface in real time using the obtained data. SVR, a machine learning technique, is widely used for linear and non-linear prediction using the concept of kernel. In particular, by applying GSVQR (Generalized Support Vector Quantile Regression), overestimation, underestimation, and neutral estimation of product surface roughness are performed and compared. Furthermore, surface roughness is predicted using the linear kernel and the RBF kernel. In terms of accuracy, the results of the RBF kernel are better than those of the linear kernel. Since it is difficult to predict the amount of tool wear in real time, the product surface roughness is predicted with acceleration and current data excluding the amount of tool wear. In terms of accuracy, the results of excluding the amount of tool wear were not significantly different from those including the amount of tool wear.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.249-249
• /
• 2020

수공구조물을 설계하기 위해서는 다양한 지속기간에 대한 설계수문량을 추정해야 한다. 국내의 경우도 기후변화로 인한 이상기후의 발생으로 1~2시간 동안 강우강도가 큰 집중호우가 발생하여 도시홍수를 발생시키며 직접 또는 간접적으로 피해를 주고 있다. 특히 북한 지역은 강우관측소가 존재하지 않은 지역이 많아 수공구조물 설계에 필요한 설계수문량을 추정하기에 많은 어려움이 있다. 본 연구에서는 하향스케일링(down-scaling)을 이용하여 북한 지역의 24시간 이내의 확률강우량을 추정하고자 한다. 이를 위하여 미계측 유역인 화천댐 상류유역의 지역빈도해석과 군집분석을 수행하여 수문학적 동질성을 확보하였고, 한강유역을 4개의 동질지역으로 구분하였다. 스케일 성질은 동일한 분포형을 가정하므로 수문학적 동질성이 확보된 기준 지속기간의 자료로부터 임의이 지속기간에 대한 확률강우량 추정이 가능하다. 따라서 북한지역의 짧은 지속기간에 대한 확률 강우량 추정을 위하여 동일한 지역 내의 지역 스케일 지수와 스케일 인자를 이용하여 하향스케일링을 적용할 수 있으며, 단기 혹은 장기에 해당하는 지속기간에 대한 확률강우량을 추정할 수 있다.

• Journal of Korean Society for Quality Management
• /
• v.51 no.4
• /
• pp.497-514
• /
• 2023

Purpose: This study aims to estimate the demand for various public parking lots in Seoul by clustering similar demand types of parking lots and predicting the demand for new public parking lots. Methods: We examined real-time parking information data and used time series clustering analysis to cluster public parking lots with similar demand patterns. We also performed various regression analyses of parking demand based on diverse heterogeneous data that affect parking demand and proposed a parking demand prediction model. Results: As a result of cluster analysis, 68 public parking lots in Seoul were clustered into four types with similar demand patterns. We also identified key variables impacting parking demand and obtained a precise model for predicting parking demands. Conclusion: The proposed prediction model can be used to improve the efficiency and publicity of public parking lots in Seoul, and can be used as a basis for constructing new public parking lots that meet the actual demand. Future research could include studies on demand estimation models for each type of parking lot, and studies on the impact of parking lot usage patterns on demand.

• Journal of Korean Society on Water Environment
• /
• v.30 no.2
• /
• pp.212-219
• /
• 2014

In this study, a land pollutant load calculation method in TMDLs was improved to consider climate change scenarios. In order to evaluate the new method, future change in rainfall patterns was predicted by using SRES A1B climate change scenarios and then post-processing methods such as change factor (CF) and quantile mapping (QM) were applied to correct the bias between the predicted and the observed rainfall patterns. Also, future land pollutant loads were estimated by using both the bias corrected rainfall patterns and the enhanced method. For the results of bias correction, both methods (CF and QM) predicted the temporal trend of the past rainfall patterns and QM method showed future daily average precipitation in the range of 1.1~7.5 mm and CF showed it in the range of 1.3~6.8 mm from 2014 to 2100. Also, in the result of the estimation of future land pollutant loads using the enhanced method (2020, 2040, 2100), TN loads were in the range of 4316.6~6138.6 kg/day and TP loads were in the range of 457.0~716.5 kg/day. However, each result of TN and TP loads in 2020, 2040, 2100 was the same with the original method. The enhanced method in this study will be useful to predict land pollutant loads under the influence of climate change because it can reflect future change in rainfall patterns. Also, it is expected that the results of this study are used as a base data of TMDLs in case of applying for climate change scenarios.

• Journal of Korea Water Resources Association
• /
• v.43 no.9
• /
• pp.813-822
• /
• 2010

An important problem in frequency analysis is the estimation of the quantile for a certain return period. In frequency analysis an assumed probability distribution is fitted to the observed sample data to estimate the quantile at the upper tail corresponding to return periods which are usually much larger than the record length. In most cases, the selection of an appropriate probability distribution is based on goodness of fit tests. The goodness of fit test method can be described as a method for examining how well sample data agrees with an assumed probability distribution as its population. However it gives generally equal weight to differences between empirical and theoretical distribution functions corresponding to all the observations. In this study, the modified Anderson-Darling (AD) test statistics are provided using simulation and the power study are performed to compare the efficiency of other goodness of fit tests. The power test results indicate that the modified AD test has better rejection performances than the traditional tests. In addition, the applications to real world data are discussed and shows that the modified AD test may be a powerful test for selecting an appropriate distribution for frequency analysis when extreme cases are considered.

• Journal of Korea Water Resources Association
• /
• v.51 no.9
• /
• pp.747-759
• /
• 2018

Multivariate regional frequency analysis has advantages of regional and multivariate framework as adopting a large number of regional dataset and modeling phenomena that cannot be considered in the univariate frequency analysis. To the best of our knowledge, the multivariate regional frequency analysis has not been employed for hydrological variables in South Korea. Applicability of the multivariate regional frequency analysis should be investigated for the hydrological variable in South Korea in order to improve our capacity to model the hydrological variables. The current study focused on estimating parameters of regional copula and regional marginal models, selecting the most appropriate distribution models, and estimating regional multivariate growth curve in the multivariate regional frequency analysis. Annual maximum rainfall and duration data observed at 71 stations were used for the analysis. The results of the current study indicate that Frank and Gumbel copula models were selected as the most appropriate regional copula models for the employed regions. Several distributions, e.g. Gumbel and log-normal, were the representative regional marginal models. Based on relative root mean square error of the quantile growth curves, the multivariate regional frequency analysis provided more stable and accurate quantiles than the multivariate at-site frequency analysis, especially for long return periods. Application of regional frequency analysis in bivariate rainfall-duration analysis can provide more stable quantile estimation for hydraulic infrastructure design criteria and accurate modelling of rainfall-duration relationship.

• Journal of Korea Water Resources Association
• /
• v.43 no.8
• /
• pp.733-745
• /
• 2010

Seasonality of hydrologic extreme variable is a significant element from a water resources managemental point of view. It is closely related with various fields such as dam operation, flood control, irrigation water management, and so on. Hydrological frequency analysis conjunction with partial duration series rather than block maxima, offers benefits that include data expansion, analysis of seasonality and occurrence. In this study, nonstationary frequency analysis based on the Bayesian model has been suggested which effectively linked with advantage of POT (peaks over threshold) analysis that contains seasonality information. A selected threshold that the value of upper 98% among the 24 hours duration rainfall was applied to extract POT series at Seoul station, and goodness-fit-test of selected GEV distribution has been examined through graphical representation. Seasonal variation of location and scale parameter ($\mu$ and $\sigma$) of GEV distribution were represented by Fourier series, and the posterior distributions were estimated by Bayesian Markov Chain Monte Carlo simulation. The design rainfall estimated by GEV quantile function and derived posterior distribution for the Fourier coefficients, were illustrated with a wide range of return periods. The nonstationary frequency analysis considering seasonality can reasonably reproduce underlying extreme distribution and simultaneously provide a full annual cycle of the design rainfall as well.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.3
• /
• pp.29-35
• /
• 2011

This research proposes the suitable method for estimating the future probable rainfall based in 2100 on the observed rainfall data from main climate observation stations in Korea and the rainfall data from the A1B climate change scenario in the Korea Meteorological Administration. For all those, the frequency probable rainfall in 2100 was estimated by the relationship between average values of 24-hours annual maximum rainfalls and related parameters. Three methods to estimate it were introduced; First one is the regressive analysis method by parameters of probable distribution estimated by observed rainfall data. In the second method, parameters of probable distribution were estimated with the observed rainfall data. Also the rainfall data till 2100 were estimated by the A1B scenario of the Korea Meteorological Administration. Last method was that parameters of probable distribution and probable rainfall were estimated by the A1B scenario of the Korea Meteorological Administration. The estimated probable rainfall by the A1B scenario was smaller than the observed rainfall data, so it is required that the estimated probable rainfall was calibrated by the quantile mapping method. After that calibration, estimated probable rainfall data was averagely became approximate 2.3 to 3.0 times. When future probable rainfall was the estimated by only observed rainfall, estimated probable rainfall was overestimated. When future probable rainfall was estimated by the A1B scenario, although it was estimated by similar pattern with observed rainfall data, it frequently does not consider the regional characteristics. Comparing with average increased rate of 24-hours annual maximum rainfall and increased rate of probable rainfall estimated by three methods, optimal method of estimated future probable rainfall would be selected for considering climate change.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.1
• /
• pp.165-174
• /
• 2019

As a nonstationarity is observed in hydrological data, various studies on nonstationary frequency analysis for hydraulic structure design have been actively conducted. Although the inherent diversity in the atmosphere-ocean system is known to be related to the nonstationary phenomena, a nonstationary frequency analysis is generally performed based on the linear trend. In this study, a nonstationary frequency analysis was performed using climate indices as covariates to consider the climate variability and the long-term trend of the extreme rainfall. For 11 weather stations where the trend was detected, the long-term trend within the annual maximum rainfall data was extracted using the ensemble empirical mode decomposition. Then the correlation between the extracted data and various climate indices was analyzed. As a result, autumn-averaged AMM, autumn-averaged AMO, and summer-averaged NINO4 in the previous year significantly influenced the long-term trend of the annual maximum rainfall data at almost all stations. The selected seasonal climate indices were applied to the generalized extreme value (GEV) model and the best model was selected using the AIC. Using the model diagnosis for the selected model and the nonstationary GEV model with the linear trend, we identified that the selected model could compensate the underestimation of the rainfall quantiles.