• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.19-20
• /
• 2023

The pre-qualification system related to floor impact noise is considered ineffective, and thus, the introduction of a post-verification system is being prepared. This is because the performance, which was notarized in the qualification test due to various reasons, was not uniformly confirmed on building construction fields. Industry practitioners perceive that this is due to the influence of factors such as the flatness, levelness and/or thickness of the floor. However, it is very difficult to confirm such facts in a short period of time on the fields, and since the practical application of technology to measure and evaluate quantitatively and the establishment of a system are insufficient, it cannot be said to be a problem that can be brought to the surface. In fact, even when considering the conventional measurement of the dynamic modulus of elasticity, measurements are performed under controlled variables, such as placing a 200mm×200mm buffer material on a flat test-floor. However, in the fields, it is common to lay down larger productions(for example, 900mm×600mm) on the bare floor where significant variables are not controlled, and to construct finishing layers corresponding to the pre-qualified floor system without separately confirming the realization of the dynamic modulus of elasticity in the field conditions. In this study, spatial information of the bare floor on the field was measured and evaluated through a laser scanner. Technical methods for assessing the smoothness, flatness, and thickness of construction surfaces were reviewed, providing key insights for grading the quality of construction based on these criteria. Through further detailed and thorough investigations, it is expected that results suitable for practical application and systematization will be derived.

• The Journal of Industrial Distribution & Business
• /
• v.9 no.11
• /
• pp.25-38
• /
• 2018

Purpose - This study aimed to identify the sub-dimensions of fashion social media quality (information quality, social quality, service quality, system quality) and investigate how they affect purchase intention through fashion information use behavior (information acceptance, information diffusion). Research design, data, and methodology - Data collection was carried out twice for systematic verification of the research model. In the first data collection, the reliability and validity of research variables were verified through 238 respondents and questionnaires were revised and supplemented based on their responses. In March 2018, the final survey was conducted from 755 respondents the age of 20 to 49. Using SPSS 23.0, descriptive statistics, exploratory factor analysis, correlation analysis were performed. In order to test hypotheses, structural equational modeling technique was employed using AMOS 23.0. Results - First of all, fashion Social media quality consists of four factors including information quality, social quality, service quality and system quality. Second, fashion Social media information quality, social quality, and system quality were shown to have a positive(+) effect on information acceptance behavior, and social quality, service quality and system quality were shown to have a positive(+) effect on information diffusion behavior. It was also determined that the acceptance and diffusion behaviors of fashion information through fashion Social media had positive(+) influence on purchase intention. Conclusions - This study holds academic significance in its identification of the components of fashion Social media quality and for conducting an empirical analysis on the causal relationship between fashion information acceptance and diffusion behaviors, and purchase intention. The results of this study indicate that fashion involvement is the key factors in determining the quality of Social media, the acceptance of information through Social media, and, by extension, the purchase of fashion products. Practitioners in the fashion industry may use the findings of this study in order to build more effective Social media strategy.

• Journal of Korean Society for Quality Management
• /
• v.48 no.3
• /
• pp.381-393
• /
• 2020

Purpose: The purpose of this study was to find useful solutions by analyzing causes and results about defects on mechanical drawing notes and provide an automated tool with solutions to mechanical engineers. Methods: The collected data for defects on mechanical drawing notes were from ongoing development and mass production projects. Various measurement methods were used based on the Lean 6 Sigma analysis such as Process analysis, C&E diagram and some statistical analysis. Results: The results of this study are as follows; The results of the Lean 6 Sigma analysis, the validity of the selected indicators for improving drawing notes quality was verified through the verification of cause variables. The strategy established to improve the mechanical drawing notes was reflected as an automated program, and the defects were within a manageable range and achieved target Sigma level. Conclusion: Through the application of the "Mechanical drawing notes automation tool", it is expected to resolve the "Voice of Customer, VOC" and "Voice of Business, VOB".

• Journal of Environmental Health Sciences
• /
• v.28 no.2
• /
• pp.61-69
• /
• 2002

Oship stream is located nearby south eastern coasts. This study was performed to find out waters quality modeling and then to predict water quality of Oship stream. Based on survey data, BOD, T-N, T-P calibration and verification result were in good agreement with measured value within mean coefficient variance(MSE) value, which were 13.9%, 9.0%, 26.5% and 19.5%, 12.0%, 16.5%, respectively. Sectional water quality predictions of the main stream of Oship stream are executed on the basis of the following cases 1) with sewage treatment of Dogye-eup 2) reduction of mine wastewater treatment of 80% in th basin. As a result, BOD, T-P improvement rates at down stream of Oship stream, case 1) were appeared 12.2%, 22.2%, case 2) maximum sulfate ion and conductivity reduction removal rate of Oship stream were 58%, 68%. The main pollution sources of Oship-stream were almost domestic wastewater and mine wastewater discharged from Dogye-eup which located in uppers stream. The large effects will appear after the construction of Dogye sewage water treatment plant which remove the organic matter and nutrients in these sewage water. The waste water from mine can not easily to treat for characteristics of effluence and economic problems. However, to achieve the goal of water quality in Oship-stream water system, treatments of those are necessary.

• Journal of Wetlands Research
• /
• v.8 no.1
• /
• pp.59-71
• /
• 2006

River Management System was developed to achieve water quality analysis that reflects physical characteristics of river flow. The Gyecheon basin which is located at the upstream of Hoengseong dam was selected as an experimental watershed and hydrologic and water quality monitoring network was set up for acquisition of real time data. The observed data have been stored in the system until present. The hydraulic and water quality models were constructed for an experimental watershed, and the calibration and verification was performed using past flood events and observed water quality data. Graphic User Interface(GUI) was developed with ArcView in a study area. Developed system can be effectively used to water quality monitoring and management in Hoengseong Lake.

• Culinary science and hospitality research
• /
• v.23 no.4
• /
• pp.144-162
• /
• 2017

This research utilized integrated package program of PASW Statistics 18.0 and AMOS 22.0 to analyze how the influence of service quality factor of coffee chains affects customer satisfaction and intention of customer behavior. The utilized statistics techniques were frequency analysis, exploratory, confirmatory factor analysis, covariance structure analysis, multiple group structure equation model analysis, etc. As a result of hypothesis verification, first of all, it was verified that the service quality factor of coffee chains affected positive (+) effect on service justice. Second, it was verified that the service justice affected positive (+) effect on customer satisfaction. To see it detailed, it is possible to see that all factors, perception of interactive justice, distributive justice, procedural justice, were adopted as the case of affecting service satisfaction (p<.001). Third, it was verified that among the circumstances that service quality affected to satisfaction, justice played a role as intermediary role. Fourth, it was verified that service satisfaction affected positive (+) effect on customer satisfaction, finally, the influence that customer satisfaction affecting behavioral intention has no effect on behavioral intention by brands of domestic or abroad.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.5 no.4
• /
• pp.263-272
• /
• 2009

Nowadays, lots of software that have similar functions is being produced. Hence it is getting more important to select the best and suitable software for each individual or company. Moreover, there are few trustworthy materials regarding to the objective procedure and criteria for the best evaluation of the software quality. To overcome these problems, benchmarking has been carried out. However, benchmarking is also confronting the limit of quality evaluation verification due to the difficult of the objectification of the major test items. To solve these problems, some others try to evaluate the quality of software using objective criteria of evaluation based on ISO/IEC standards. Nevertheless, this method using these defined evaluation items and criteria may result in not very reliable outcome. Therefore, this paper offers the evaluation items reflected in the characteristics of each software in order to prove the validity of the proposed method. Moreover, the objective and quantitative criterion which analyzes and reflects the organization characteristics using AHP methodology is applied to the experiment and performance evaluation. Hence we expect that the proposed method provides the needs of the re-establishment of software quality evaluation criteria and the improvement of process in terms of management.

• Journal of Korean Society for Quality Management
• /
• v.52 no.1
• /
• pp.57-75
• /
• 2024

Purpose: The purpose of this study is to recognize the importance of a cooperative relationship in which parents of early childhood education institutions share responsibility and authority, and to suggest ways to establish efficient management strategies. Methods: The survey was conducted through online responses using Google surveys and SNS. The collected data was collected using SPSS 22.0 and Smart PLS 4.0 statistical programs. Results: Among the 13 hypotheses, only expertise in educational service quality was confirmed to have no effect on customer trust. The verification results of 11 mediation effects confirmed that customer satisfaction does not mediate the relationship between non-verbal communication and customer loyalty, and that customer trust does not mediate the relationship between expertise and verbal communication on customer loyalty. Conclusion: We presented basic data for establishing a marketing strategy that can improve the quality of services of infant and toddler education institutions and increase management performance.

• Journal of Korean Society for Quality Management
• /
• v.42 no.3
• /
• pp.339-360
• /
• 2014

Purpose: The objective of this paper was to analyze the requirements of the end-users by class after carrying out a survey on the user requirements for sleeping bags and utilize the result for effective product development. Methods: The test for difference in means by class was conducted through one sample analysis and one-way ANOVA after the survey result has gone through a reliability verification, and an LSD (Least Significant Difference) test was conducted as a post-mortem method. Results: A significant result was derived from the survey on the user requirements for sleeping bags by method of use, use of combination of sleeping bag components or a sleeping bag alone. Conclusion: The significant result derived from the survey of this paper on the user requirements for sleeping bags can be utilized for effective development of sleeping bags.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.25 no.3
• /
• pp.61-67
• /
• 2017

The Nose Landing Gear(NLG) of Rotary Wing Aircraft is an essential equipment in Landing System for pilot to perform a flight mission. It supports the fuselage at ground and absorbs the impact from the ground when landing, thereby, these functions sustain operational capability for pilot and crew. However, the A aircraft caused stick-slip behavior when it was stationed on the ground. Therefore, this paper summarizes pilot comment in operation which are classified by cause of occurrence and the troubleshooting process about each comment. It also describes design improvements which was derived from troubleshooting and suggests verification results of flight test.