• Journal of Korean Society on Water Environment
• /
• v.27 no.2
• /
• pp.228-234
• /
• 2011

The goal of water quality management on stream and watershed is to focus not on discharged loads management but on a water quality management. Discharged loads management is not goal of water quality management but way for perform with total maximum daily loads management. It is necessary to estimate the relation between non-point source with stromwater runoff (NPSSR) and water quality to select a watershed where it is required to manage NPSSR for water quality improvement. To evaluate the effects of NPSSR on stream's water quality, we compare the aspects of water quality in dry and wet seasons using flow duration curve analysis based on flow rate variation data by actual surveying. In this study we attempt to quantify the variation characteristic of water quality and estimate the Inflow characteristic of pollution source with water quality and flow rate monitoring on 10 watersheds. We try to estimate water quality and flow rate by regression analysis and try again regression analysis with each high and low water quality data more than estimations. An analysis of relation between water quality and flow rate of 10 watersheds shows that the water quality of the Nonsan and the Ganggyeong streams had been polluted by NPSSR pollutants. Other eight streams were important point source more than NPSSR. It is wide variation range of $BOD_5$ also high average concentration of $BOD_5$. We have to quantify water quality variation by cv1 in wet season and cv365 in dry season with comparing the estimate of high water quality and low water quality. This method can be used to indicator for water quality variation according to flow rate.

• Journal of Korean Society for Quality Management
• /
• v.32 no.4
• /
• pp.265-273
• /
• 2004

We got the growth distance curve by spline smoothing method with observed marketing data and the growth velocity curve by the derivation of the growth distance curve. Using this growth velocity curve, we defined the several characteristic points which describe the variation of marketing data. In this paper, to specify several patterns of marketing data, we suggested characteristic function by using these characteristic points. In addition, we applied characteristic function to the seventeen brands of electric home products data.

• Journal of Korean Society for Quality Management
• /
• v.27 no.2
• /
• pp.126-142
• /
• 1999

Robust design is an approach to reducing performance variation of quality characteristic values in quality engineering. Taguchi has an idea that mean and variation are handled simultaneously to reduce the expected loss in products and processes. Taguchi parameter design has a great deal of advantages but it also has some disadvantages. The various research efforts aimed at developing alternative methods. In the Taguchi parameter design, the product-array approach using orthogonal arrays is mainly used. However, it often requires an excessive number of experiments. An alternative approach, which is called the combined-array approach, was suggested by Welch et. al. ( 1990) and studied by others. In these studies, only single quality characteristic was considered. In this paper we propose how to simultaneously optimize multiple quality characteristics using desirability function when we used the combined-array approach to assign control and noise factors. An example is illustrated to show the difference between the Taguchi's product-array approach and the combined-array approach.

• Journal of Integrative Natural Science
• /
• v.6 no.1
• /
• pp.39-45
• /
• 2013

Robust design is an approach to reducing performance variation of quality characteristic values in quality engineering. Taguchi has an idea that mean and variation are handled simultaneously to reduce the expected loss in products and processes. In the Taguchi parameter design, the product-array approach using orthogonal arrays is mainly used. However, it often requires an excessive number of experiments. An alternative approach, which is called the combined-array approach, was studied. In these studies, only single quality characteristic (or response) was considered. In this paper we propose how to simultaneously optimize for multiple quality characteristics (or multiresponse) using desirability function when we used the combined-array approach to assign control and noise factors.

• ETRI Journal
• /
• v.28 no.3
• /
• pp.347-354
• /
• 2006

The characteristic variation of 3-dimensional (3-D) solenoid-type embedded inductors is investigated. Four different structures of a 3-D inductor are fabricated by using a low-temperature co-fired ceramic (LTCC) process, and their s-parameters are measured between 50 MHz and 5 GHz. The circuit model parameters of each building block are optimized and extracted using the partial element equivalent circuit method and an HSPICE circuit simulator. Based on the model parameters, the characteristics of the test structures such as self-resonant frequency, inductance, and quality (Q) factor are analyzed, and predictive modeling is applied to the structures composed of a combination of the modeled building blocks. In addition, characteristic variations of the 3-D inductors with different structures using extracted building blocks are also investigated. This approach can provide a characteristic estimation of 3-D solenoid embedded inductors for structural variations.

• International Journal of Quality Innovation
• /
• v.4 no.2
• /
• pp.16-31
• /
• 2003

A reducing variation of quality characteristics is a typical example of quality improvement. In such a case, we treat the quality characteristic, as a response variable and need to find active factors affecting the response from many candidate factors since reducing the variation of the response will be achieved by reducing variation of the active factors. In this paper, we first derive a method of selecting an active factor by linear regression. It is well known that correlation between factors deteriorates the precision of estimators. We, therefore, examine robustness of the selecting method against the correlation in the data set and derive an evaluation method of the deterioration brought by the correlation. Furthermore, some examples of selecting and evaluation methods are shown to demonstrate practical usage of the methods.

• Journal of the East Asian Society of Dietary Life
• /
• v.25 no.3
• /
• pp.484-491
• /
• 2015

This study investigated the quality variation characteristics of Ssamjang containing Cheongkukjang, in order to improve the degree of preference of Cheongkukjang. The amount of Cheongkukjang was set at 1% based on sensory evaluation. Ssamjang containing Cheongkukjang was stored at $37^{\circ}C$ for 13 weeks, after which quality variation characteristics were weekly. During storage for 13 weeks, physicochemical quality characteristics, moisture content, and pH of Ssamjang containing Cheongkukjang slightly decreased, whereas salt content did not change. Amino nitrogen content slightly increased by 1 week but decreased by 3 weeks and then increased by 5 weeks. For microbiology quality characteristics, viable cell counts and total cell counts of B. cereus were unchanged. For sensory quality characteristics, shape quality was poor after 13 weeks while mold, drying phenomenon, and swelling phenomenon were not observed. Therefore, physicochemical quality and microbiology quality of Ssamjang containing Cheongkukjang were unchanged during storage for 13 weeks, and the storage limit was determined to be 12 weeks according to sensory quality evaluation.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.25 no.2
• /
• pp.1-10
• /
• 2002

Process capability indices are widely used in industries and quality assurance system. In past years, process capability analysis have been used to characterize process performance on the basis of univariate quality characteristics. However, in actual manufacturing industrial, statistical process control (SPC) often entails characterizing or assessing processes or products based on more than one engineering specification or quality characteristic. Therefore, the analysis have to be required a multivariate statistical technique. This paper introduces to multivariate capability indices and then selects a multivariate process capability index incorporated both the process variation and the process deviation from target among these indices under the multivariate normal distribution. We propose a new multivariate capability index $MC_{pm}^+$ using quality loss function instead of the process variation and this index is compared with the proposed indices when quality characteristics are independent and dependent of each other.

• Proceedings of the Korean Society for Quality Management Conference
• /
• 1998.11a
• /
• pp.610-621
• /
• 1998

In parameter design introduced by Taguchi, we analyze a signal-to-noise(SN) ratio. The SN ratio is a function of the expected loss due to the variation of quality characteristic. In this paper, an easy way for developing SN ratios is presented, which can be used to several quality characteristics simultaneously in parameter design. To develop such multivariate SN ratios, the transformation method of the expected loss and combining techniques are employed. And the analysis of real empirical data for an application of the proposed method is also presented.

• Journal of Korean Society for Quality Management
• /
• v.27 no.3
• /
• pp.67-78
• /
• 1999

In parameter design introduced by Taguchi, we analyze a performance measure, so called SN ratio. The SN ratio is a function of the expected loss due to the variation of quality characteristic. In this paper, an easy way for developing performance measures is presented, which can be used to control several quality characteristics simultaneously in parameter design. To develop such multivariate performance measures, the transformation method of the expected loss and combining techniques are employed. And the analysis of real empirical data for an application of the proposed method is also presented.