• Journal of the Korean Wood Science and Technology
• /
• v.36 no.6
• /
• pp.23-32
• /
• 2008

Anatomical and physical characteristics of seven cultivars of chestnut wood (Castanea crenata Sieb. et Zucc.), Tanzawa, Ibuki, Mansung, Arima, Ginyose, Tsukuba, and Riheiguri, were investigated to obtain some valuable information for their possibilities to be used for high quality furnitures and woodcrafts. Solitary pore and figured-porous or ring-porous wood types were observed in wide growth rings, and ring-porous in narrow growth rings. Procumbent type was prevalent in ray cells although upright and square types were scarcely existed. Uniseriate, biseriate, and multiseriate rays were observed in tangential section. Uniseriate ray was abundant near the pith, and biseriate and multiseriate rays were frequently existed near the bark. The occurrence rate of biseriate and multiseriate rays was significantly high in Tanzawa, Ibuki, Mansung and Tsukuba, but was somewhat low in Arima, Ginyose and Riheiguri. The inner region showed larger vessel diameter, more vessel number, fewer ray number and higher ray height than the outer region. Growth-ring width in inner region was larger than that in outer region. Growth-rings in inner region of Mansung and Arima were wide while that of Ibuki was narrow. Outer region in all cultivars showed higher latewood percentage than inner region. Especially, Mansung and Tsukuba showed significantly high latewood percentage in their outer region. Green moisture content and density of heartwood were higher than those of sapwood. Tsukuba and Riheiguri had higher green moisture content, and Ibuki and Riheiguri had higher green density than the other chestnut cultivars.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.19 no.4
• /
• pp.317-324
• /
• 1999

This study was conducted to evaluate the dry matter yield and quality of mixture swards associated with Festulolium braunii(Festuca pratensis Huds. ${\times}$ Lolium multiflorum Lam.). The experiment was arranged in a randomized block design with four mixture types: A(control); orchardgrass(seeding rate 60%) + tall fescue 20% + Kentucky bluegrass 10% + white clover 10%, B; orchardgrass 60% + tall fescue 20% + Festulolium braunii 10% + white clover 10%, C; orchardgrass 60% + Festulolium braunii 20% + Kentucky bluegrass 10% + white clover 10%, and D; orchardgrass 30% + Festulolium braunii 30% + red clover 40%. This study was carried out from Sept. 1996 to Dec. 1998 at Chungnam National University. The DM yield of D mixture type was higher than that of other mixture types(P<0.05). Compared with A(control) mixture type, the DM yield of the B mixture type which substitutes Kentucky bluegrass with Festulolium braunii was higher, but the C mixture type which substitutes tall fescue with Festulolium braunii was lower than that of A(control) mixture type. The content of CP, NDF, ADF, hemi-cellulose and cellulose among mixture types shows no significant differdence. Howerever, the DMD was not significantly different among mixture types in 1997, but the DMD of C and D mixture type were significantly higher than those of other mixture types in 1998(P<0.05). On the otherhand, the yield of CP and DDM in D mixture types was higher than those of the other mixture types(P<0.05). In botanical composition, the Festulolium braunii percentage of B, C and D mixture type with mixed Festulolium braunii wasd highly maintained, especially D mixture type was ranging from 40% to 60% in experimental periods. Following the above result, It is the most favorable mixture method for Festulolium braunii to make use of top grass like orchardgrass + red clover. It is also recommened to substitute bottom grass like Kentucky bluegrass with Festulolium braunii rather than with tall fescue in A(control) mixture type.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.61 no.1
• /
• pp.50-56
• /
• 2016

Direct seeding of sorghum (Sorghum bicolor L. Moench) has a problem of low yield including poor establishment. This poor establishment results from poor quality seed, poor seedbed preparation, seedling pests, poor sowing technique and high soil temperature. This study sought to establish the age at which sorghum seedlings can be transplanted with minimal effects on grain yield. Transplants were raised in 128 nursery tray pot. Five seedling ages were established by transplanting at 10 (T10), 15 (T15), 20 (T20), 25 (T25) and 30 (T30) days after planting (DAP). The treatment combinations were arranged in a randomized complete block design and replicated three times with an individual plot size of $6{\times}5m^2$. Each plot had five ridges with a planting space of $0.60{\times}0.20m^2$ at one plants per stand. Results showed that seedling age on transplanting significantly affected growths and yields to sorghum after transplanting. Plant heights and diameters of transplants at T15 were longer than the other transplants. Conclusively, The advantages of this practice were better control of crop density and greater yields; either to fill gaps after emerging and thinning of crops or to compensate for a growth period that was too short for a complete crop cycle.

• Journal of the Korean GEO-environmental Society
• /
• v.16 no.12
• /
• pp.45-52
• /
• 2015

With the rising interest in the environment, more attention on ecological restoration for damaged slope surface to restore its original state has been drawn. Generally, the most useful method is vegetation based spray work. This method uses green soil including sewage sludge, sawdust, paper sludge, and weathered granite soil. However, because there are neither accurate information nor test values about green soil, green soil is often lost by environmental factors such as rainfalls and strong winds. To solve the problem of green soil, it is necessary to prepare design standards about green soil, and conduct studies to deal with green soil loss in consideration of various variables including basic material property, soil quality of slope surface, and weather. This study was conducted in the mixture of green soil and eco-friendly soil stabilizer. With green soil, basic material property test and compaction test were conducted for the analysis on the basic characteristics of green soil. In the mixture with soil stabilizer at a certain ratio, we conducted shear strength test depending on the ratio in order to analyze the maximum shear strength, cohesion and the change in internal friction angles. Furthermore, in the mixture ratio of green soil and soil stabilizer, which is the same as the ratio in the shear strength test, an inclination of slope surface was made in laboratory for the analysis on erosion and germination rate. Finally, this study evaluated the most effective and economic mixing ratio of soil stabilizer to cope with neighboring environmental factors. According to the test, the shear strength of green soil increased up to 51% rely onto the mixing ratio of and a curing period, and its cohesion and internal friction angle also gradually increases. It is judged that the mixture of soil stabilizer was effective in improving shear strength and thereby increased the stability of green soil.

• Journal of Korea Water Resources Association
• /
• v.55 no.8
• /
• pp.603-611
• /
• 2022

In urban areas, the impermeable area continues to increase due to urbanization, which interferes with the surface penetrating and infiltrating of rainwater, causing most rainwater runoff to the surface, deepening the distortion of water circulation. Distortion of water circulation affects not only flood disasters caused by rainfall and runoff, but also various aspects such as dry stream phenomenon, deterioration of water quality, and destruction of ecosystem balance, and the Ministry of Environment strongly recommends the use of Low Impact development (LID) techniques. In order to apply the LID technique, it is necessary to set a rainwater management target to handle the increase in outflow after the development of the target site, and the current standard sets the rainwater management target using the 10-year daily rainfall. In this study, the difference from the current standards was analyzed through statistical analysis and classification of independent rainfall ideas using inter-event time definition (IETD) in setting the target amount of rainwater management to improve water circulation. Using 30-year rainfall data from 1991 to 2020, methods such as autocorrelation coefficient (AC) analysis, variation coefficient (VC) analysis, and annual average number of rainfall event (NRE) analysis were applied, and IETD was selected according to the target rainfall period. The more samples the population had, the more IETD tended to increase. In addition, by analyzing the duration and time distribution of independent rainfall according to the IETD, a plan was proposed to calculate the standard design rainfall according to the rainwater management target amount. Therefore, it is expected that it will be possible to set an improved rainwater management target amount if sufficient samples of independent rainfall ideas are used through the selection of IETD as in this study.

• Korean Journal of Construction Engineering and Management
• /
• v.24 no.6
• /
• pp.24-35
• /
• 2023

Recently, the Ministry of Land, Infrastructure and Transport presented the '6th Construction Technology Promotion Basic Plan' and 'Smart Construction Revitalization Plan (2022.7.20)'. Off-Site Construction (OSC), which involves construction and production of PC (Precast Concrete) and Modular, etc., has advantages in shortening the construction period, reducing costs, improving quality, reducing construction waste, and reducing safety accidents. However, the construction cost is high compared to the traditional RC construction method, which has hindered its utilization and spread. In this study, OSC utilization was improved. An economic analysis indicator and methodology that can support decision-making in the planning and design stages for multi-unit housing were proposed. The factors used in the economic analysis of OSC (based on the PC method) of apartment houses were reviewed. As for the indicators used in the cost and benefit section, 'Construction Period', 'Disaster Occurrence', 'Waste Generation', and 'Greenhouse gas Emission', which reflect the technical advantages of OSC, were derived. In addition, a scenario analysis was conducted based on actual apartment housing case data for the presented economic analysis indicators and benefit calculation standards. The level of benefit that offsets the difference between the existing RC construction method and the construction cost was reviewed. In future studies, it will be necessary to conduct additional case studies to apply the measurement criteria for detailed indicators and supplement the benefit indicators.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.44 no.2
• /
• pp.64-70
• /
• 2024

The experiment was conducted to determine the changes in seed productivity of Italian ryegrass (Lolium multiflorum Lam.) according to nitrogen fertilization levels in the southern region of Korea. Italian ryegrass (IRG) variety 'Green Call' was sown in the fall of 2021 in Jinju, Gyeongsangnam-do. The experiment consisted of three nitrogen fertilizer levels (100, 120, and 140 N kg/ha) with three replications using a randomized complete block design. Harvesting was done approximately 30 days after heading on May 18th. There was no difference in heading date among treatments, which occurred on April 18th. The longest IRG was observed in the 140 N kg/ha treatment, but there was no significant difference. No significant differences were observed in lodging, disease resistance, and cold tolerance among treatments, but lodging was severe in all treatments. The length of the spike averaged 44.95 cm, with no difference among treatments, and the number of seeds per spike was highest in the 120 N kg/ha treatment. Seed yield increased with increasing nitrogen fertilizer levels, averaging 3,707 kg/ha (as-fed basis). DM content of seed and straw averaged 76.95% and 62.19%, respectively, with no significant differences among treatments. The remaining straw after harvesting averaged 6,525 kg/ha on a dry matter basis, with the highest value observed in the 140 N kg/ha treatment. Overall, considering the results, the optimal nitrogen fertilizer application rate for seed production of Italian ryegrass in the southern region when sown in autumn was found to be 120 N kg/ha.

• Korean Journal of Food Science and Technology
• /
• v.30 no.2
• /
• pp.348-355
• /
• 1998

The developments of various processed foods and the high quality dried fruits, in particular, are urgently needed for the enhancement of fruit consumption and their competitive values. Therefore, in this study, three variables by three level factorial design and response surface methodology were used to determine optimum conditions for osmotic dehydration of kiwifruit. The relationships of moisture losses, solid gains, weight reductions, sugar contents, titratable acidities and vitamin C contents depending on changes with temperature, sugar concentration and immersion time were investigated. The moisture loss, solid gain, weight reduction and reduction of moisture content after osmotic dehydration were increased as temperature, sugar concentration and immersion time increased. The effect of concentration was more significant than those of temperature and time on mass transfer. Sugar content was increased by increasing sugar concentration, temperature, immersion time during osmotic dehydration. Titratable acidity and vitamin C content were increased by decreasing temperature, immersion time and increasing concentration during osmotic dehydration. The regression models showed a significant lack of fit (P>0.05) and were highly significant with satisfying values of $R^2$. At the given conditions such as $66{\sim}69%$ moisture content, above $24^{\circ}Brix$ sugar content and more than 23 mg% vitamin C, the optimum condition for osmotic dehydration was $37^{\circ}C,\;55^{\circ}Brix$ and 1.5 hour.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.29 no.1
• /
• pp.7-12
• /
• 2009

This experiment was conducted to compare the agronomic characteristics and productivity in introduced forage pea cultivars at the experimental field. The experiment was arranged in a randomized block design with three replications. The forage pea used in this study were two cultivars ('Livioletta', 'Austrian Pea') and one Chinese milk vetch cultivar (Chinese domestic cultivar). Flowing of 'Livioletta' cultivar was May 16th and 'Austrian Pea' cultivar was 18th May, 20 days later than the former. The 'Livioletta' cultlvar showed stronger than winter hardiness of 'Austrian Pea' cultivar. Dry matter (DM) content of 'Liviotetta' and 'Austrian Pea' cultivars were 22.5% and 20.9% chinese milk vetch showed the lowest content with 17.7%. 'Austrian pea' cultivar showed the highest DM yield with 5,617 kg/ha but the DM yield of 'Livioletta' cultivar was low with 3,652 kg/ha. The yield of CP (crude protein) and TDN (total digestible nutrient) set high at 'Austrian Pea' cultivar. And 'Livioletta' and 'Austrian Pea' cultivars showed CP content with 15.5% and 14.4% but Chinese milk vetch with 19.3%. The acid detergent fiber (ADF) and neutral detergent fiber (NDF) content of 'Austrian Pea' cultivar were 23.2% and 40.3%. Therefore 'Austrian pea' cultivar seems to be suitable varieties in paddy field as winter forage crops.

• Journal of vocational education research
• /
• v.35 no.4
• /
• pp.131-153
• /
• 2016

The purpose of this study was to derive evaluator's role and capability for institution accreditation evaluation of NCS-based vocational competency development training. This study attempted to explore in various ways evaluator's minute roles using Delphi method, and to derive knowledge, skill, attitude and integrity needed to verify the validity. To the end, this study conducted the Delphi research for over three rounds by selecting education training professionals and review evaluation professions as professional panels. From the results, roles of evaluators were defined as the total eight items including operator, moderator-mediator, cooperator, analyzer, verifier, institution evaluator, institution consultant, and learner, and the derived capabilities with respect to each role were 25 items in total. The area of knowledge included four items of capabilities such as HRD knowledge, NCS knowledge, knowledge of vocational competency development training, and knowledge of training institution accreditation evaluation, and the area of skill comprised fourteen items of capabilities such as conflict management ability, interpersonal relation ability, word processing ability, problem-solving ability, analysis ability, pre-preparation ability, time management ability, decision making ability, information comprehension and utilization ability, comprehensive thinking ability, understanding ability of vocational competency development training institutions, communication ability, feedback ability, and core understanding ability. The area of attitude was summarized with the seven items in total including subjectivity and fairness, service mind, sense of calling, ethics, self-development, responsibility, and teamwork. The knowledge, skill and attitude derived from the results of this study may be utilized to design and provide education programs conducive to qualitative and systematic accreditation and assessment to evaluators equipped with essential prerequisites. It is finally expected that this study will be helpful for designing module education programs by ability and for managing evaluator's quality in order to perform pre-service education and in-service education according to evaluator's experience and role.