• Korean Journal of Optics and Photonics
• /
• v.14 no.3
• /
• pp.255-259
• /
• 2003

In this paper, we propose an improved image encryption and decryption method using a virtual image and a joint transform correlator (JTC). The encrypted image is obtained by the Fourier transform of the product of a virtual-phase image and a random-phase image, and a Fourier transform of the decrypting key generated by the proposed phase assignment rule is used as the Fourier decrypting key. Based on the solution, the original image is reconstructed using JTC in the frequency-domain. The proposed method using a virtual image, which does not contain any information from the original image, prevents the possibility of counterfeiting by unauthorized people. And also the auto-correlation terms, which are the drawback of a JTC system, contribute to reconstructing the original image rather than to disturbing its identification. But because phase-only encryptions are sensitive to noise and scratches, phase errors can be generated in fabricating the encrypted image or the Fourier decrypting key so the errors that are responsible for degradation of the quality of the reconstructed image are analyzed and the solution is demonstrated. Computer simulations show the solution, and the proposed method is very useful for JTC architecture.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.56-64
• /
• 2019

Various defects that occur in the maintenance stage are connected to all kinds of wasted resources and economic losses as additional investments are made. Residents are harmed temporally, materially, and psychologically, and businesses suffer not only monetary losses but also reduced credit ratings. The aim of this study was to increase the efficiency of quality management and minimize defect disputes by estimating the importance of the defect type considering the defect frequency and severity in apartment buildings. For this, 7,548 defect items for 48 apartment buildings were examined. The analysis confirmed that defects are concentrated on RC, finishing and MEP work. In addition, defects with high importance are identified as broken, incorrect installation, missing tasks, and water problems. In addition, the exterior wall/roof, the Internal wall, ceiling, and floor, which are constructed in the field, are more important than the furniture and MEP equipment installed in the field.

• Journal of Software Engineering Society
• /
• v.24 no.3
• /
• pp.101-110
• /
• 2011

Web Service which consists of SOAP, WSDL and UDDI is a software system that enables interactions of heterogeneous systems on networks with standardized XML message. Especially, UDDI is a registry for supporting the registration of a service by service publisher and discovery of a service by service requester. The preliminary studies are just about publishing and searching services. It presents the researches about UDDI study for improvement of searching a service and extended UDDI design for improvement of reusability with service components aspects. In this paper, we suggest not only features about publishing and searching services of existing UDDI system but also novel UDDI data structures and API for a reusable service model. In addition, we design and implement an extended UDDI system for publishing and finding the reusable services. Therefore, by using proposed UDDI systems, service developers reduce development costs and time through developing a service application reusing the already implemented services. In addition, it can expect to ensure the quality of services by reusing the proven services.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.175-178
• /
• 2009

H.264/AVC is a video coding standard of ITU-T and ISO/IEC, and widely spreads its application due to its high compression ratio more than twice that of MPEG-2 and high image quality. In this paper, we explained Intra Prediction in H.264/AVC, which is able to achieve higher compressing efficiency from correlation removal of adjacent samples in spatial domain, and proposed efficient Intra Predictor architecture design for H.264/AVC decoder. The proposed system reduced computation cycle using processing element and precomputation processing element and also reduced the number of access to external memory using efficient register. We designed the proposed system with Verilog-HDL and verified with suitable test vector. The proposed Intra Predictor achieved about 60% cycle reduction comparing with existing Intra Predictors.

• Journal of Cadastre & Land InformatiX
• /
• v.52 no.1
• /
• pp.81-93
• /
• 2022

Recently, there have been many studies on object recognition around the vehicle and recognition of traffic signs and traffic lights in autonomous driving. In particular, such the recognition of traffic lights is one of the core technologies in autonomous driving. Therefore, many studies for such the recognition of traffic lights have been performed, the studies based on various deep learning models have increased significantly in recent. In addition, as a high-quality AI training data set for voice, vision, and autonomous driving is released on AIHub, it makes it possible to develop a recognition model for traffic lights suitable for the domestic environment using the data set. In this study, we developed a recognition model for traffic lights that can be used in Korea using the AIHub's training data set. In particular, in order to improve the recognition performance, we used various models of YOLOv4 and YOLOv5, and performed our recognition experiments by defining various classes for the training data. In conclusion, we could see that YOLOv5 shows better performance in the recognition than YOLOv4 and could confirm the reason from the architecture comparison of the two models.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.609-618
• /
• 2017

This paper presents the quantitative evaluation method for technologies acquired from the defense offset program. We firstly deduced the consideration in development by gathering the opinions of 128 experts by conducting a survey. Next, we made up an additional 49 experts for developing a performance management system of the offset program. The management system covered 4 technology fields which are defense R&D, depot maintenance, performance improvement, and manufacturing. The development procedure was composed of 4 parts: setting-up of work process, defining performance indicators, calculating weighted values of each indicator, and devising quantitative method. The results of this research could be used for enhancing the effectiveness of the offset program in 3 ways: establishing a systematic work process after acquisition of technology in offset program, establishing the positive feedback architecture by providing incentives to superior institute or company which is appointed through quantitative performance evaluating, and publicizing and promoting quantified outstanding performances for contributing to advance the offset program.

• Journal of the Korea Institute of Building Construction
• /
• v.13 no.5
• /
• pp.434-440
• /
• 2013

Generally, the envelope of a freeform building is composed of a structure made with rectangular or C-shaped steel pipe, and steel or aluminum panel finishes on the structure. However, these construction methods increase material loss and cost and time. There are also numerous cases of misunderstanding of design and difficulties in construction, which frequently cause construction errors. Such construction errors decrease construction productivity, resulting in poor construction quality and the need for rework, as well as cost and time overruns. To solve the problem, this study proposes a 3D coordinate control technology for freeform structure implemented through a CNC(Computerized Numerical Control) Twisted tube method, and by extension, develops a BIM-based envelope construction method for freeform building.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.4 s.346
• /
• pp.1-12
• /
• 2006

In this paper we propose an efficient mobile multimedia communication protocol, mobile terminal software platform and mobile VoIP application for IP-based convergence networks. The Proposed mobile multimedia communication protocol is called as ST-MRSVP (Split tunnel based Mobile Resource reServation Protocol) which integrates split tunnel based Mobile IP and RSVP in order to support hish speed mobility. Since mobile terminal platform supports QoS (Qualify of Service) with keeping seamless mobility, mobile QoS supporting modules are developed and interworked together by means of shared memory mechanism. Testbed is composed of a core-network embedding the proposed protocols and wireless LAN-based access networks. We verify functionality and performance of the proposed techniques by using various mobility test over the testbed. As a result, the proposed architecture can reduce the handover delay time with QoS support under 30% comparing with the standard mechanisms and support voice quality as good as CDMA phone.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.4
• /
• pp.713-720
• /
• 2012

Recently, holography has received much attention as the next generation visual technology. Hologram is obtained by the optical capturing, but in recent years it is mainly produced by the method using computer. This method is named by computer generated hologram (CGH). Since CGH requires huge computational amount, if it is implemented by S/W it can't work in real time. Therefore it should use FPGA or GPU for real time operation. If it is implemented in the type of H/W, it can't obtain the same quality as S/W due to the bit limitation of the internal system. In this paper, we analyze the bit width for minimizing the degradation of the hologram and reducing more hardware resources and propose guidelines for H/W implementation of CGH. To do this, we performs fixed-points simulations according to main internal variables and arithmetics, analyze the numerical and visual results, and present the optimal bit width according to application fields.

• KIISE Transactions on Computing Practices
• /
• v.20 no.12
• /
• pp.664-669
• /
• 2014

As the prevalence of cloud computing increases, various cloud service types have emerged, such as IaaS, PaaS, and SaaS. The growth and diversification of these cloud services has also resulted in the development of technology for cloud service brokers (CSBs), which serve as intermediate cloud services that can assist cloud tenants (users) in deploying services that fit their requirements. In order to broker cloud services, CSBs require the specification of structural models in order to facilitate the analysis and search for cloud services. In this study, we propose a variability-based service analysis model (SAM) that can be used to describe various cloud services. This model is based on the concept of variability in the software product line and represents the commonality and variability of cloud services by binding variants to each variation point that exists in the specification, quality, and pricing of the services. We also propose a virtual cloud bank architecture as a CSB that serves as an intermediate to provides tenants with appropriate cloud services based on the SAM.