• Journal of Korean Society for Quality Management
• /
• v.47 no.3
• /
• pp.437-451
• /
• 2019

Purpose: The purpose of this study is to improve the quality of the PGM system by improving the structure and production process of slip-ring rotary joint for radar. Methods: The improvement measures for each cause are established through failure analysis of broken items. Specifically, changing in the housing to improve the heating system. Changing the transportation method to prevent damage to equipment during transport. Changing work process of the attenuator ring to prevent damage. etc. Results: The results of this study are as follows; improving the heating system reduces heat generated by the attenuator by about 7 degrees and obtain additional temperature margins. Reduction of defect rate because of adding X-band rotary joint run-out measurement test, ESS of slip-ring rotary joint and Transportation improvement(reinforced flight boxes, tube protection, etc). Getting stable VSWR values by improving work process of attenuator overheating due to a bad bonding process. Conclusion: Through this study, improvements were made to slip-ring rotary joint that failed repeatedly for various reasons. As a result of the application of the improvements, the same fault does not occur until now, so we can see that the quality of PGM has improved.

• Journal of Korean Society for Quality Management
• /
• v.43 no.4
• /
• pp.499-510
• /
• 2015

Purpose: This paper treats the improvement of the quality and reliability of military weapon systems based on the maintenance data. Methods: The proposed method of the data integration and refinement are used to obtain the component reliability information and to find the frequently failed components based on the Pareto analysis. Based on the reliability information and the number of failed component frequencies, the target components of quality improvement are determined and improved by multiple methods such as engineering changes, special meetings, additional training and revising maintenance manuals. Results: Based on the proposed process, we find some components which need to be improved in order to enhance the quality and reliability. Conclusion: A process is developed for improving the quality and reliability of weapon systems. This process will be adopted by various weapon systems to enhance the quality and reliability, as well as reduce military spending.

• International Journal of Contents
• /
• v.18 no.3
• /
• pp.34-48
• /
• 2022

The purpose of this study was to develop indicators for quality management of educational institutions, and to achieve this, literature analysis and expert interviews were conducted. Through literature analysis, the components of TQM were derived focusing on factors to improve the quality of education, engineering education accreditation standards, and a representative education accreditation system, were considered. Additionally, seven areas as well as 32 indicators required for education quality management, were derived by comparing the EFQM excellence model and the MBNQA education model, applied for quality management of companies and institutions. By comparing and synthesizing these results, a draft was developed for the quality management index of educational institution. Next, opinions on correction and supplementation of quality management indicators derived from literature analysis, were collected from five education experts. From the comparisons and integration of these results, eight criteria (leadership, strategy, customers, people, facilities and environment, curriculum management, curriculum improvement, and performance management) and 34 indicators, were proposed for quality management indicators for educational institutions. Curriculum management, people, and performance management criteria were considered more significantly in quality management of educational institutions, and several implications are suggested based on the study results.

• Proceedings of the Safety Management and Science Conference
• /
• 1999.11a
• /
• pp.53-72
• /
• 1999

IPQC system was introduced for the flight safety at the age of scientific safety management in the 1980s. In spite of performing this system, aircraft accidents caused by human factors, which were above 70% among all flight accident factors, have not been reduced. Accordingly, throughout this paper I analyzed the aircraft accident factors by means of a literature study and a pilot survey. Then, based on the notion of TQC(Total Quality Control), I hierarchically classified Individual Quality into Capacity Management, Safety Management, and General Management and did the low-ranked management factors as well. AHP (Analytic Hierarchy Process), one of the scientific management methods, was used for estimating the relative importance of Individual Quality Control factors and the heavy aircraft accident causes over the last 20 years were analyzed according to the flight ranks. Based on the comparative analysis of results derived above, an IPQC model as flight ranks is established. In short, according to this newly suggested model we can obtain the maximum flight safety with the preventive actions against aircraft accidents caused by human factors and by improving the operation effect under the reasonable pilot management.

• The Journal of Fisheries Business Administration
• /
• v.50 no.3
• /
• pp.17-29
• /
• 2019

This paper aims to find out the problems and improvement direction of quality control and hygiene management of fishery products in Korea. For this reason, we conducted a comparative analysis of quality control and hygiene management of fishing, landing and selling between Japan and Korea, taking mackerel as an example. Japan has established a systematic freshness management system from fishing to landing (production) areas and consumption areas. On the other hand, Korea is not fully lead-managed in the production area after fishing, and is distributed in a state where the quality of the product is deteriorated due to exposure to room temperature. Accordingly, a certain quality can not be secured at the final consumption stage, and sanitary problems occur. In order to improve the quality control and hygiene management of the fishery products, the following needs to be improved. First, we will improve the fishing level freshness management system. Second, we will improve the quality control and hygiene management of fish in the production area and wholesale stage. Third, we will promote the introduction of innovative sales and consignment sales systems at the production stage. Fourth, we will establish a consistent low temperature distribution system from the production area to the wholesale stage from a long-term perspective. Fifth, we will promote the development and education of manuals on fish quality and hygiene management.

• Journal of Korean Society for Quality Management
• /
• v.27 no.1
• /
• pp.1-17
• /
• 1999

To satisfy the needs of customers, firms must supply customers with products of high quality. This requires firms establish a quality management system which pursues customer satisfaction in a business strategy. Quality management must be connected with the strategic chain and the firm can obtain excellent performances only when top management leadership which places people over profit is exercised. The purpose of this study is to analyse whether elements of strategic quality management has any effect on quality and business performances. A questionnaire was used for the survey. In this study, it is showed that elements of strategic quality management(strategy, leadership, customer satisfaction, quality improvement activity, technological innovation, shop floor management, employee participation) are positively correlated with the quality and business performances. This tells firms have to carry out the strategic quality management effectively based on the strategic chain and emphasizing leadership.

• Journal of Korean Society for Quality Management
• /
• v.38 no.2
• /
• pp.180-189
• /
• 2010

For the success of total six sigma innovation, it is necessary to improve the suppliers' quality in the supply chain. This paper presents the deployment and support system of six sigma innovation for supply chain quality improvement, with the application to an aerospace production company. The process of project selection, project implementation, financial effect verification, benefit sharing is presented. This paper will benefit the companies which are going to enhance all the companies in the supply chain via six sigma activities.

• Proceedings of the Safety Management and Science Conference
• /
• 2004.05a
• /
• pp.61-65
• /
• 2004

As technique that can contribute in quality improvement in design process to overcome shortcoming of traditional quality control, call design or development department quality control activity that is achieved to reduce gun damage shuddering at circle minimizing change or side effect of product performance as off-line quality control. This paper discuss optimal process design of investment projects expansion and replacement investment on each line or individual in the production. Generally optimal plant design has add to a few method by Subsidiary means with use a especial method. And then in this paper, a Robust design is presented, which may be effective to the processes appraisal or improvement. We propose that should make a optimal plant design model for reducing field failure rate to assign by real data on different factors in plant system. Using this model, robust design of taguchi method used in this comprehensive method for reducing field failure rate in plant system.

• Journal of Korean Society for Quality Management
• /
• v.23 no.2
• /
• pp.113-121
• /
• 1995

A business is nothing more than a collection of people. To assure the Quality of the business's items and services, it is essential to assure that those people are properly trained and motivated. This paper outlines the problems and difficulties encountered in implementing a formal quality education system on a business and also provides a guide to the useful references which should be considered in quality education system. The concluding section describes the effective methods of quality education to achieve successful quality management.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.6 no.1 s.12
• /
• pp.1-12
• /
• 2007

The objective of Bus Information System developed as a part of the ITS, provides the operation information of buses to passengers and managers. The system uses roadside antennas (reading electronic tags on board buses) to enable wireless communication each other and radio data communication to deliver information about buses and their locations. This information is used to estimate the arrival time of the bus which will be shown on the bus stop message board or via internet. Bus Information System or Bus Management System (BMS) is going ahead and set up in many local governments, and recently quality improvement of the BIS is considered as a very important element in expanding of business or management. Therefore this research wished to contribute rationalization of the system by maintaining optimum quality. An gang was chosen to apply overall quality control process and will be evaluated in terns of its propriety and performance. This study has led the improvement of service and promote the use of public transits, which is the best way to solve the city traffic problem by effective management of public transits.