• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47
• /
• pp.55-62
• /
• 2002

With lower quality and three to four times higher price than those of imported malting barley, the competitiveness of domestic malting barley is decreasing. Although the causes can be found in that the domestic environments are much unfavorable to cultivate the malting barley compared with those of USA or Canada, it is mainly reasoned from poorer developments in variety of high quality malting barley as well as in cultivation technology. For assuring the competitiveness of domestic malting barley, therefore, not only the development of high quality malting barley suitable to the climatic environment of this country but also the political supports of the government are required. Also, in addition to the breeding of the good quality malting barley haying higher germinative energy, and heavier and larger kernels of good plumpness as well as lower protein content, the modification of quality inspection standards from the system relying only on the visual characteristics such as kernel size distribution rate, shrimped kernel rate, foreign materials and so on, to such system as those of developed countries haying quality criteria such as protein content for inspection is absolutely required for the quality improvement of domestic malting barley.

• Korean Journal of Construction Engineering and Management
• /
• v.9 no.4
• /
• pp.193-205
• /
• 2008

Quality is an important keyword representing the corporate competitiveness and image in today' s construction industry. Especially in concrete construction, any problems or defects in fresh concrete can significantly degrade the entire quality and performance of the facility built. Thus, adequate quality inspection and testing must be exercised over the fresh concrete, if concrete with the required strength, durability and appearance is to be obtained. The testing of concrete delivered to the construction job site involves testing of fresh concrete and performing strength tests on hardened concrete. The principal tests conducted on fresh concrete include the slump test and tests for air and salt content. The temperature of fresh concrete should be checked out hot or cold weather concreting. The 7-day and 28-day strength of hardened concrete are also determined by compression tests on usually cylinder samples. However, it is very complex and time-consuming process requiring a lot of efforts to document those on-site concrete testing results and to accumulate their historical data. The primary objective of this study is to suggest a unique PDA and web-based system which enables an on-site quality manager to effectively conduct the concrete inspection and testing, automatically document and accumulate the collected historical data, and promptly obtain the approval from supervisors. Finally, it is anticipated that the effective use of the proposed PDA and web-based system would be able to improve reliability of the concrete quality inspection and testing data as well as significantly reduce the approval process.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.7 no.4
• /
• pp.9-17
• /
• 1997

This paper describes a monitoring system that examines water quality by analyzing behavioral patterns of fishes. The water quality inspection system (WQIS) captures color images of fishes with a CCD camera, extracts out fish regions from the images, and determines motion characteristics of fishes by computing consecutive frames. We define five types of measures that reflect behavioral patterns of fishes : floatness, fledness, clustemess, diffusiveness, and mobility. These measures are utilized when the system performs fuzzy inference to induce the conclusion about water quality. We believe that the proposed system can be a solution for securing clean water.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.04a
• /
• pp.343-348
• /
• 1992

Using the real-time image processing technique, we have developed an automatic visual inspection system which detects the defects of the surface muonted components in PCB( missing components, mislocation, mismounts, and reverse polarity, etc ) and collects the quality control and production management data. An image processing system based on a commercial parallel processor, TRANSPUTER by which the image processing time can be largely reduced was designed. Analyzing the collected data, the proposed inspection system contributes to the productivity improvement throughthe reduction of defective rate.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1996.03a
• /
• pp.24-29
• /
• 1996

The seniconductor, which is precision product, requires many inspection processes. The surface conditions of the semiconductor chip effect on the functions of the semiconductors. The defects of the chip surface is crack or void. Because general inspection method requires many inspection processes, the inspection system which searches immediately and preciselythe defects of the semiconductor chip surface. We propose the inspection method by using the computer vision system. This study presents an image processing algorithm for inspecting the surface defects(crack, void)of the semiconductor test samples. The proposed image processing algorithm aims to reduce inspection time, and to analyze those experienced operator. This paper regards the chip surface as random texture, and deals with the image modeling of randon texture image for searching the surface defects. For texture modeling, we consider the relation of a pixel and neighborhood pixels as noncasul model and extract the statistical characteristics from the radom texture field by using the 2D AR model(Aut oregressive). This paper regards on image as the output of linear system, and considers the fidelity or intelligibility criteria for measuring the quality of an image or the performance of the processing techinque. This study utilizes the variance of prediction error which is computed by substituting the gary level of pixel of another texture field into the two dimensional AR(autoregressive model)model fitted to the texture field, estimate the parameter us-ing the PAA(parameter adaptation algorithm) and design the defect detection filter. Later, we next try to study the defect detection search algorithm.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.3
• /
• pp.992-999
• /
• 2000

Textile dimension inspection is one of the basic issues in the textile dyeing and finishing industry. And also, it a plays an important role in the quality control of total fabric products. In this paper, we implement a real-time textile dimension inspection system which detects various real defects, defects positions of textile and the density of textiles. The proposed method consists of textile density measurement algorithms with zone-occurrence features from subband image which detect various types of real defects. The performance of the proposed method is tested with a number of real textile samples with 10 types of defects and three basic structures of textile. By the dimension inspection of textile at continuous stages in the fabrication process, it is possible to measure the density of textile up to 150m/min and to detect the defect of textile at real time within $\pm$1% error percentages. And also it can be monitored the condition of textile throughout at all the significant working process and can be improved textile quality.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.1
• /
• pp.453-458
• /
• 2016

One of the most common applications of machine vision is quality inspections in automated production. In this study, a welding inspection system that is controlled by a PC and a PLC equipped with a multi-camera setup was developed. The system was designed to measure the primary dimensions, such as the length and width of the welding areas. The TCP/IP protocols and multi-threading techniques were used for parallel control of the optical components and physical distribution. A coaxial light was used to maintain uniform lighting conditions and enhance the image quality of the weld areas. The core image processing system was established through a combination of various algorithms from the OpenCV library. The proposed vision inspection system was fully validated for an actual weld production line and was shown to satisfy the functional and performance requirements.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.8
• /
• pp.625-632
• /
• 2002

We propose an outsole measurement/inspection system to improve the quality of the shoe product. It uses the Divide-and-Conquer technique to measure the length of shoes'outsole. First, it detects edge positions of outsole's toe and heel from each image frame using an unique scale block we defined and calculates the outsole's length as the distance of two edge positions. Then it compensates the total length of outsole using the side image of outsole. Next, it classifies the outsole as inferior goods if the measurement error is bigger than 5.8mm. As a result of testing with the various kinds of outsoles, it was shown that the 95% accuracy was acquired within 1mm allowable error range. In conclusion, the proposed inspection system is effective and useful in the measurement/inspection process of shoe product and any material object as well.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.7
• /
• pp.573-577
• /
• 2002

A tape feeder of a SMD(Surface Mount Device) mounter is a device that sequentially feeds electronic components on a tape reel to the pick-up system of the mounter. As components are getting much smaller, feeding accuracy of a feeder becomes one of the most important factors for successful component pick-up. Therefore, it is critical to keep the feeding accuracy to a specified level in the assembly and production of tape feeders. This paper describes a tape feeder inspection system that was developed to automatically measure and inspect feeding accuracy using machine vision. It consists of a feeder base, an image acquisition system, and a personal computer. The image acquisition system is composed of CCD cameras with lens, LED illumination systems, and a frame grabber inside the PC. This system loads up to six feeders at a time and inspects them automatically and sequentially. The inspection software was implemented using Visual C++on Windows NT with easily usable GUI. Using this system, we can automatically measure and inspect the quality of all feeders in production process by analyzing the measurement results statistically.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.118.3-118
• /
• 2001

CLED (Contact Light Emitting Device) has three layers consisting of a transparent electrode, a light emitting layer and a substrate. When the substrate of the CLED comes in contact with a fingerprint under AC input voltage, it makes an electric field between the fingerprint and the device. Due to the electric field, the light is emitted along the ridgeline of the fingerprint. The intensity along the ridge on the surface of the CLED increase in proportion to the electric field. To achieve uniform performance of fingerprint verification devices, inspection system of CLED for quality control were required. In this research, we proposed the factors for quality controls such as dimensions of the CLED, uniformity ...