• Journal of the Korean Society of Food Science and Nutrition
• /
• v.20 no.6
• /
• pp.565-571
• /
• 1991

A short time microwave heat treatment, bringing in hot NaCl solution, addition of KCI, CaCl2, MgCl2 into brining solution and salts mixture of phosphates into half fermented dongchim were investigated for their effects on some quality of dongchimi, a Korean pickle of Chinese radish roots, during fermentation. The reference dongchimi was prepared by brining the radish roots in 7% NaCl added with seasonings at $25^{\circ}C$. The result showed that microwave heat treatment affected little on the pH or total acidity change during fermentation. Soaking the roots in 80-9$0^{\circ}C$ hot salt solution significantly reduced the fermentation and softening rate of dongchimi while a rather rapid fementation was found for those soaked in 7$0^{\circ}C$. Addition of KCI and CaCl2 into brining solution slowed the pH decrease and softening of the roots, respectively. The dangchimi added with the salts mixture of phosphate, citrate and nitrite was significantly extreneded the fermentation time to pH 4.0 by more than two folds.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.3 no.1
• /
• pp.32-37
• /
• 2002

Ca$^{2+}$ plays an important the in firmness retention of plant tissues. In this study, effect of CaCl$_2$on extention of shelf-life of kakdugi, and its effective conditions of addition were determined. The rates of pH decrease, acidity increase and mechanical texture decrease during fermentation wire reduced by the addition of CaCl$_2$. Furthermore, sensory characteristics of kakdugi such as crispness, sourness and overall taste were improved. Addition of 0.1% CaCl$_2$in brine solution and 0.05% CaCl$_2$to seasoning was the most effective condition to extend shelf-life of kakdug.g.

• Journal of the East Asian Society of Dietary Life
• /
• v.19 no.6
• /
• pp.1032-1038
• /
• 2009

This study describes the production of functional Ssukgaen Dduk though the addition of yam and mugwort to Goami 2, a healthy diet and diabetes. In this study, the rice is soaked for many hours and the particle size distribution of the rice was determined as a function of the water-soaking time. The produce Ssukgaen Dduk was repeated after the addition of varying concentration of yam. Non-glutinous rice was soaked for 4, 8, 12 hours and the Goami 2 rice was soaked for 4, 8, 12, 16, 20 hours and ground to a powder and passed through a 18~30 mesh sieve to determine the particle size distribution of the rice as a function of water-soaking time. Using this approach, optimal soaking time for Dduk was found to be 4 hours for non-glutinous rice(pass rate of 30 mesh: 58.29%) and 12 hours for Goami 2(pass rate of 30 mesh: 87.88%). When Ssukgaen Dduk made with Goami 2 rice powder only and those made with varying amounts of yam(10%, 20%, 30%, and 40%) were subjected to the sensory test, the control group(non-glutinous rice Ssukgaen Dduk) had the highest preference in general(3.73). Out of Ssukgaen Dduk containing yam, the S4 group, which contained 30% yam, had the highest preference(2.87) In addition the S4 group also had the highest extent of soft, and delicacy of texture general preference of S5, 40% the lowest(2.37), S1 only Goami 2 the hardness(112.59), as 91.46 lower (83.85) yam increased, the less hard the texture Ssukgaen Dduk. In conclusion Ssukgaen Dduk though the addition of mugwort and yam to the Goami 2 rice, it would be better to add 30% yam to 70% Goami 2 rice powder mixed with mugwort.

• Journal of Powder Materials
• /
• v.23 no.2
• /
• pp.91-94
• /
• 2016

High-quality colloidal CdSe/ZnS (core/shell) is synthesized using a continuous microreactor. The particle size of the synthesized quantum dots (QDs) is a function of the precursor flow rate; as the precursor flow rate increases, the size of the QDs decreases and the band gap energy increases. The photoluminescence properties are found to depend strongly on the flow rate of the CdSe precursor owing to the change in the core size. In addition, a gradual shift in the maximum luminescent wave (${\lambda}_{max}$) to shorter wavelengths (blue shift) is found owing to the decrease in the QD size in accordance with the quantum confinement effect. The ZnS shell decreases the surface defect concentration of CdSe. It also lowers the thermal energy dissipation by increasing the concentration of recombination. Thus, a relatively high emission and quantum yield occur because of an increase in the optical energy emitted at equal concentration. In addition, the maximum quantum yield is derived for process conditions of 0.35 ml/min and is related to the optimum thickness of the shell material.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.55 no.4
• /
• pp.411-418
• /
• 2019

In this study, to investigate the effect of physical and chemical properties of butanol on the engine performance and combustion characteristics, the coefficient of variations of IMEP (indicated mean effective pressure) and fuel conversion efficiency were obtained by measuring the combustion pressure and the fuel consumption quantity according to the engine load and the mixing ratio of diesel oil and butanol. In addition, the combustion pressure was analyzed to obtain the pressure increasing rate and heat release rate, and then the combustion temperature was calculated using a single zone combustion model. The experimental and analysis results of butanol blending oil were compared with the those of diesel oil under the similar operation conditions to determine the performance of the engine and combustion characteristics. As a result, the combustion stabilities of D.O. and butanol blending oil were good in this experimental range, and the indicated fuel conversion efficiency of butanol blending oil was slightly higher at low load but that of D.O. was higher above medium load. The premixed combustion period of D.O. was almost constant regardless of the load. As the load was lower and the butanol blending ratio was higher, the premixed combustion period of butanol blending oil was longer and the premixed combustion period was almost constant at high load regardless of butanol blending ratio. The average heat release rate was higher with increasing loads; especially as butanol blending ratio was increased at high load, the average heat release rate of butanol blending oil was higher than that of D.O. In addition, the calculated maximum. combustion temperature of butanol blending oil was higher than that of D.O. at all loads.

• ETRI Journal
• /
• v.35 no.3
• /
• pp.469-479
• /
• 2013

This paper proposes an efficient computation-aware mode decision and search point (SP) allocation algorithm for spatial and quality scalabilities in Scalable Video Coding. In our proposal, a linear model is derived to allocate the computation for macroblocks in enhancement layers by using the rate distortion costs of the base layer. In addition, an adaptive SP decision algorithm is proposed to decide the number of SPs for motion estimation under the constraint of the allocated computation. Experiment results demonstrate that the proposed algorithm allocates the computation resource efficiently and outperforms other works in rate distortion performance under the same computational availability constraint.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.15 no.12
• /
• pp.1043-1048
• /
• 2003

An experimental investigation was executed to determine the capacity degradation due to non-uniform refrigerant distribution in a multi-path evaporator. In addition, the possibility of recovering the capacity reduction by controlling the refrigerant distribution among refrigerant paths was assessed. The finned-tube evaporator, which had a three-path and three-depth-row, was tested by controlling inlet quality, exit pressure, and exit superheat for each refrigerant path. The capacity reduction due to superheat unbalance between each path was as much as 30%, even when the overall evaporator superheat was kept at a target value of 5.6$^{\circ}C$. It may indicate that the internal heat transfer within the evaporator assembly caused the partial capacity drop. For the evaporator having air mal-distributions, the maximum capacity reduction was found to be 8.7%. A 4.5% capacity recovery was obtained by controlling refrigerant distribution to obtain the target superheat at the outlet of each path.

• Journal of the Korean Ceramic Society
• /
• v.32 no.2
• /
• pp.270-278
• /
• 1995

Nd : YAl3(BO3)4 (NYAB) single crystal has been developed for green laser. In this experiment, we found K2O/3MoO3/0.5B2O3 to be a suitable flux for NYAB crystal growth, and grew NYAB crystal by TSSG method using this flux. By varying the cooling rate of solution, seed orientation, and rotation speed, the effects of these growth conditions on the crystal quality and its morphology were examined. Suitable growth conditiions were a cooling rate slower than 2.4$^{\circ}C$/day, the rotation speed of 25~30 rpm, and the <001> seed orienttion. The phases of grown crystal, coexisting and volatile materials were investigated by X-ray diffraction. In addition, the possiblity of laser action was examined by UV analysis.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.172-172
• /
• 2003

It has been known that Pd-MILC shows much faster and lower temperature crystallization than Ni-MILC but it can not be put into practice due to the quality issue of thus fabricated poly crystals. In this study, addition of Pd into Ni-MILC has been attempted in order to take advantages of the Pd-MILC without sacrificing of the Ni-MILC TFTs. It turns out that when 5% of Pd has been added to Ni for MILC, MILC growth rate increases two - three times faster than pure Ni-MILC. The MILC growth rate shows monotonic increase with increase the amount of Pd in Ni up to 50%. Even when small amount of Pd was added to Ni like 5%, crystallization phenomenon already follows the way of Pd-MILC. The Poly-W thus fabricated shows lower leakage current than pure Ni-MILC TFT without losing any amount of on-current This fact is very important in low temperature poly-TFTs because MILC-TFTs, especially suffer from the relatively high leakage current

• Corrosion Science and Technology
• /
• v.14 no.6
• /
• pp.325-330
• /
• 2015

Pipe wall-thinning by flow-accelerated corrosion (FAC) is a significant and costly damage of secondary system piping in nuclear power plants (NPPs). All NPPs have their management programs to ensure pipe integrity from wall-thinning. This study analyzed the pipe wall-thinning caused by changing the amine, which is used for adjusting the water chemistry in the secondary system of NPPs. The pH change was analyzed according to the addition of amine. Then, the wear rate calculated in two different amines was compared at the steam cycle in NPPs. As a result, increasing the pH at operating temperature (Hot pH) can reduce the rate of FAC damage significantly. Wall-thinning is affected by amine characteristics depending on temperature and quality of water.