• Journal of information and communication convergence engineering
• /
• 제12권4호
• /
• pp.263-270
• /
• 2014

Corner detection and feature extraction are essential aspects of computer vision problems such as object recognition and tracking. Feature detectors such as Scale Invariant Feature Transform (SIFT) yields high quality features but computationally intensive for use in real-time applications. The Features from Accelerated Segment Test (FAST) detector provides faster feature computation by extracting only corner information in recognising an object. In this paper we have analyzed the efficient object detection algorithms with respect to efficiency, quality and robustness by comparing characteristics of image detectors for corner detector and feature extractors. The simulated result shows that compared to conventional SIFT algorithm, the object recognition system based on the FAST corner detector yields increased speed and low performance degradation. The average time to find keypoints in SIFT method is about 0.116 seconds for extracting 2169 keypoints. Similarly the average time to find corner points was 0.651 seconds for detecting 1714 keypoints in FAST methods at threshold 30. Thus the FAST method detects corner points faster with better quality images for object recognition.

• 스마트미디어저널
• /
• 제6권3호
• /
• pp.57-63
• /
• 2017

차량번호인식 개선을 위해서는 무엇보다 양질의 차량이미지를 획득하는 것이 무엇보다 먼저 선행되어야 하는 필수적인 요소이다. 일반적인 도로영상들은 시간, 햇빛, 날씨 등 다양한 환경의 영향을 받아 번호판 밝기가 일률적이지 않고 다양한 형태로 나타나기 때문에 여러 가지 이미지 보정 기능을 거치게 되고 이로 인하여 인식속도 저하, 인식률 저하 등이 나타난다. 따라서, 본 논문에서는 실시간 영상 촬영 시 번호판 주위의 밝기를 측정하여 카메라의 shutter, bright, gain등 이미지 밝기와 품질에 영향을 주는 각 요소를 실시간으로 제어하여 빠르고 선명한 고품질의 차량 이미지 촬영하기 위해 실시간 도로 영상을 통하여 제안된 방법을 테스트 하였다.

• Bulletin of the Korean Chemical Society
• /
• 제31권11호
• /
• pp.3371-3381
• /
• 2010

In this study, quantitative and pattern recognition analysis for the quality evaluation of Magnoliae Flos using HPLC/UV was developed. For quantitative analysis, eleven major bioactive lignan compounds were determined. The separation conditions employed for HPLC/UV were optimized using ODS $C_{18}$ column ($250{\times}4.6\;mm$, $5\;{\mu}m$) with isocratic elution of acetonitrile and water with 1% acetic acid as the mobile phase at a flow rate of 1.0 mL/min and a detection wavelength of 278 nm. These methods were fully validated with respect to the linearity, accuracy, precision, recovery, and robustness. The HPLC/UV method was applied successfully to the quantification of eleven major compounds in the extract of Magnoliae Flos. The HPLC analytical method for pattern recognition analysis was validated by repeated analysis of twenty one reference samples corresponding to seven different species of Magnoliae Flos and nine samples purchased from market. The results indicate that the established HPLC/UV method is suitable for the quantitative analysis and quality control of multi-components in Magnoliae Flos.

• Bulletin of the Korean Chemical Society
• /
• 제32권1호
• /
• pp.239-246
• /
• 2011

In this study, quantitative and pattern recognition analysis for the quality evaluation of Cimicifugae Rhizoma using HPLC/UV was developed. For quantitative analysis, three major bioactive phenolic compounds were determined. The separation conditions employed for HPLC/UV were optimized using ODS $C_{18}$ column ($250{\times}4.6mm$, $5{\mu}M$) with isocratic elution of acetonitrile and water with 0.1% phosphoric acid as the mobile phase at a flow rate of 1.0 mL/min and a detection wavelength of 323 nm. These methods were fully validated with respect to the linearity, accuracy, precision, recovery, and robustness. The HPLC/UV method was applied successfully to the quantification of three major compounds in the extract of Cimicifugae Rhizoma. The HPLC analytical method for pattern recognition analysis was validated by repeated analysis of twelve reference samples corresponding to five different species of Cimicifugae Rhizoma and seventeen samples purchased from markets. The results indicate that the established HPLC/UV method is suitable for the quantitative analysis and quality control of multi-components in Cimicifugae Rhizoma.

• 한국정보통신학회논문지
• /
• 제25권11호
• /
• pp.1486-1494
• /
• 2021

문자 인식은 스마트 주차, text to speech 등 최근 다양한 플랫폼에서 필요로 하는 기술로써, 기존의 방법과 달리 새로운 시도를 통하여 그 성능을 향상시키려는 연구들이 진행되고 있다. 그러나 문자 인식에 사용되는 이미지의 품질이 낮을 경우, 문자 인식기 학습용 이미지와 테스트 이미지간에 해상도 차이가 발생하여 정확도가 떨어지는 문제가 발생된다. 이를 해결하기 위해 본 논문은 문자 인식 모델 성능이 다양한 품질 데이터에 대하여 강인하도록 이미지 초해상도 및 문자 인식을 결합한 통째학습 신경망을 설계하고, 대안적 통째학습 알고리즘을 구현하여 통째 신경망 학습을 수행하였다. 다양한 문자 이미지 중 차량 번호판 이미지를 이용하여 대안적 통째학습 및 인식 성능 테스트를 진행하였고, 이를 통해 제안하는 알고리즘의 효과를 검증하였다.

• 한국통신학회논문지
• /
• 제38A권2호
• /
• pp.174-182
• /
• 2013

Most methods for fusion-based finger vein recognition were to fuse different features or matching scores from more than one trait to improve performance. To overcome the shortcomings of "the curse of dimensionality" and additional running time in feature extraction, in this paper, we propose a finger vein recognition technology based on matching score-level fusion of a single trait. To enhance the quality of finger vein image, the contrast-limited adaptive histogram equalization (CLAHE) method is utilized and it improves the local contrast of normalized image after ROI detection. Gabor features are then extracted from eight channels based on a bank of Gabor filters. Instead of using the features for the recognition directly, we analyze the contributions of Gabor feature from each channel and apply a weighted matching score-level fusion rule to get the final matching score, which will be used for the last recognition. Experimental results demonstrate the CLAHE method is effective to enhance the finger vein image quality and the proposed matching score-level fusion shows better recognition performance.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(4)
• /
• pp.9-12
• /
• 2001

Point pattern matching schemes for finger print recognition do not guarantee robust matching performance for finger print images of poor quality. We present a finger print recognition scheme, where transformation parameter of matched ridge pairs are estimated by Hough transform and the matching hypothesis is verified by a new measure of the matching degree using selective directional information. Proposed method may exhibit extremely low FAR(False Accept Ratio) while maintaining low reject ratio even for the images of poor quality because of the robustness to the variation of minutia points.

• 통합자연과학논문집
• /
• 제4권2호
• /
• pp.137-142
• /
• 2011

This study was performed in order to examine the statistical quality control of environmentally-friendly agricultural products(EF AP) and they using school meal service whether to be influences to EF AP recognition of it's parents. As a results of above research, we can make a conclusion the elementary and middle school meal service using the EF AP leads to the recognition change to parents affirmatively in Jeollanam-do.

• Journal of Welding and Joining
• /
• 제18권3호
• /
• pp.114-121
• /
• 2000

Since resistance spot welding has become one of the most popular sheet metal fabrication processes, a strong emphasis is being put on the quality of the welds. Throughout the years many quality estimation systems have been developed by many researchers to ensure weld quality. In this study, the process variables, which were monitored in the primary circuit of the welding machine, are used to estimate the weld quality with Hopfield neural network. The primary dynamic resistance is vectorized and stored as five patterns in the network. As the welding is done, the dynamic resistance patterns are recognized and the quality is estimated with the proposed method. Due to the primary process variables, it is possible to utilize this algorithms as an in-process real time quality monitoring system.

• 품질경영학회지
• /
• 제39권1호
• /
• pp.109-119
• /
• 2011

This study distinguished innovation activities into 3 main things (sustainability management activity, management innovation activity and quality innovation activity). Performance differences among those 3 innovation activities are again distinguished into 4 things (affecting on sales revenue, increasing productivity, improving its corporate image and cost reduction) to demonstrate recognition of performance. We also demonstrated difference of performance between manager and other workers.