• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.4
• /
• pp.76-83
• /
• 2018

The purpose of this study is to analyze people who applied for and passed engineer landscape architecture examination that had been conducted from 2007 to 2016, the test frequency and trends by the question types in the landscape structure construction and management area, and the test tendencies and features by question types, and thereby to find the test trends for landscape structure construction and management in engineer landscape architecture examination. the analysis results are presented as follows: The people who applied for and passed engineer landscape architecture examinations that had been conducted from 2007 to 2016 were analyzed. as a result, the numbers of applicants and those who passed the examination have been on the decrease from 2011 and from 2012, respectively. the 10-year average rate of successful applicants for engineer landscape architecture examination was 11.2%. The test frequency and trends by the question types in the landscape structure construction area, and the test tendencies and features were analyzed. as a result, based on the key words in the seven categories (construction plan & process management, landscape materials, landscape planting foundation, work classification based construction, landscape estimation, basic structural mechanics, and survey), the questions about work classification based construction accounted for the largest, or 25.2%, and the questions about landscape planting foundation accounted for 3.3%. therefore, landscape planting foundation had lower test frequency and was less important than other categories. The test frequency and trends by the question types in the landscape management area, and the test tendencies and features were analyzed. as a result, based on the key words in the nine categories (operation and use & maintenance, pruning management, fertilization management, weed management, irrigation and drainage management, wintering management, pest management, and lawn management, and landscape facility management), the questions about operation and use & maintenance accounted for the largest, or 37.2%, and the numbers of the questions about fertilization management and irrigation & drainage management and of the questions about waterscape facility of landscape facility management have been on the increase from 2011 and from 2015, respectively. According to the analysis on the test tendencies for landscape structure construction and management areas in the examination there have been questions in a wide range and variety of categories. in terms of the landscape structure construction area, the frequency of questions in work classification based construction, landscape materials, and excellent quality in terms of the landscape management area, the frequency of questions in fertilization management, irrigation & drainage management, and waterscape facility of landscape facility management tends to increase because of environmental factors like climate change.

• Journal of the Korean Wood Science and Technology
• /
• v.9 no.3
• /
• pp.7-15
• /
• 1981

A Japanese larch has been reforested very much in Korea, but it is not used as a wood resources for paper pulp by now. So this study is carried out to utilize the larchwood for paper pulp manufacture through the Asplund pulping process. The experiment on increasing in the brightness of the pulp is made through the addition of $MgSO_4$, $ZnSO_4$, $Al_2(SO_4)_3$, and KI as a cellulose stabilizer in chip treatment with caustic soda which is followed by high-temperature defibration and conventional peroxide bleaching (5% NaOH plus 2% additive salt per wood in cold pretreatment), or in high-consistency (30%) pulp bleaching of hydrogen peroxide and peracetic acid (100% acitve oxygen per lignin) for conventional one. The results obtained are as follows: 1. The solution of 0.5% additive salts had different pH by the sort of bases that was pH 5.7 in $MgSO_4$, liquor, pH 4.9 for $ZnSO_4$, and pH 2.9 for $Al_2(SO_4)_3$, and in the precepitation of bases which ranged to pH 6-13 for $MgSO_4$, pH 5-12 for $ZnSO_4$, and pH 3-10 for $Al_2(SO_4)_3$. 2. The cellulose stabilizer affective in high-consistency peroxide bleaching was KI, $MgSO_4$, and $ZnSO_4$, but has made a little improvement in de lignification and brightness of pulp in comparison with no addition. 3. The higher alkalinity in the chip treatment has made the higher strength and brightness of larchwood Aspiund pulp instead of downing the pulp yield. And the effective compound for cellulose stabilizer in caustic soda pretreatment of chip was $ZnSO_4$, $Al_2(SO_4)_3$ and KI in order for the conventional peroxide bleaching after Asplund pulping. 4. Therefore, the more effective additives for cellulose stabilization in high-temperature defibration of larchwood suppose to be $ZnSO_4$, $Al_2(SO_4)_3$, and KI, while KI and $MgSO_4$ for peroxide bleaching.

• The Korean Journal of Nuclear Medicine
• /
• v.39 no.1
• /
• pp.57-68
• /
• 2005

Purpose: The objective of this study was to assess attenuation correction algorithms with the $^{137}Cs$ point source for the brain positron omission tomography (PET) imaging process. Materials & Methods: Four different types of phantoms were used in this study for testing various types of the attenuation correction techniques. Transmission data of a $^{137}Cs$ point source were acquired after infusing the emission source into phantoms and then the emission data were subsequently acquired in 3D acquisition mode. Scatter corrections were performed with a background tail-fitting algorithm. Emission data were then reconstructed using iterative reconstruction method with a measured (MAC), elliptical (ELAC), segmented (SAC) and remapping (RAC) attenuation correction, respectively. Reconstructed images were then both qualitatively and quantitatively assessed. In addition, reconstructed images of a normal subject were assessed by nuclear medicine physicians. Subtracted images were also compared. Results: ELEC, SAC, and RAC provided a uniform phantom image with less noise for a cylindrical phantom. In contrast, a decrease in intensity at the central portion of the attenuation map was noticed at the result of the MAC. Reconstructed images of Jaszack and Hoffan phantoms presented better quality with RAC and SAC. The attenuation of a skull on images of the normal subject was clearly noticed and the attenuation correction without considering the attenuation of the skull resulted in artificial defects on images of the brain. Conclusion: the complicated and improved attenuation correction methods were needed to obtain the better accuracy of the quantitative brain PET images.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.17 no.2
• /
• pp.93-103
• /
• 1981

It is well-known that nowadays heat resisting and anti-corrosive materials have been widely used as the components materials of gas turbines, nuclear power plants and engines etc. In the fields of machine production industry. And materials for engine components, like as the exhaust valve of internal combustion engine, have been required to operate under the high temperature range of $700^{\circ}C$-$800^{\circ}C$ and high pressured gas with repeated mechanical load for the high performance of engines. For these components, friction welding for bonding of dissimilar steels can be applied for in order to obtain process shortening, production cost reduction and excellent bonding quality. And age hardening recently has been noticed to the heat resisting materials for further strengthening of high temperature strength, especially high temperature fatigue strength. However, it is difficult to find out any report concerning the effects of age hardening for strengthening high temperature fatigue strength to the Friction welded heat resisting and anti-corrosive materials. In this study the experiment was carried out as the high temperature rotary bending fatigue testing under the condition of $700^{\circ}C$ high temperature to the friction welded domestic heat resisting steels, SUH3-SUS303, which were 10hr., 100hr. aging heat treated at $700^{\circ}C$ after solution treatment 1hr. at $1, 060^{\circ}C$ for the purpose of observing the effects of the high temperature fatigue strength and fatigue fracture behaviors as well as with various mechanical properties of welded joints. The results obtained are summarized as follows: 1) Through mechanical tests and micro-structural examinations, the determined optimum welding conditions, rotating speed 2420 rpm, heating pressure 8kg/mm super(2), upsetting pressure 22kg/mm super(2), the amount of total upset 7mm (heating time 3 sec and upsetting time 2 sec) were satisfied. 2) The solution treated material SUH 3, SUS 303, have the highest inclination gradient on S-N curve due to the high temperature fatigue testing for long time at $700^{\circ}C$. 3) The optimum aging time of friction welded SUH3-SUS 303, has been recognized near the 10hr. at $700^{\circ}C$ after the solution treatment of 1hr. at $1, 060^{\circ}C$. 4) The high temperature fatigue limits of aging treated materials were compared with those of raw material according to the extender of aging time, on 10hr. aging, fatigue limits were increased by SUH 3 75.4%, SUS 303 28.5%, friction welded joints SUH 3-SUS 303 44.2% and 100hr. aging the rates were 64.9%, 30.4% and 36.6% respectively. 5) The fatigue fractures occurred at the side of the base matal SUS303 of the friction welded joints SUH 3-SUS 303 and it is difficult to find out fractures at the friction welding interfaces. 6) The cracking mode of SUS 303, SUH 3-303 is intergranular in any case, but SUH 3 is fractured by transgranular cracking.

• Ultrasonography
• /
• v.32 no.1
• /
• pp.59-65
• /
• 2013

Purpose: The purpose of this study is to establish the methodology regarding synthesis of ultrasound contrast agent imaging, and to evaluate the characteristics of the synthesized ultrasound contrast agents, including size or degradation interval and image quality. Materials and Methods: The ultrasound contrast agent, composed of liposome and SF6, was synthesized from the mixture solution of $21{\mu}mol$ DPPC (1, 2-Dihexadecanoyl-sn-glycero-3-phosphocholine, $C_{40}H_{80}NO_8P$), $9{\mu}mol$ cholesterol, $1.9{\mu}mol$ of DCP (Dihexadecylphosphate, $[CH_3(CH_2)_{15}O]_2P(O)OH$), and chloroform. After evaporation in a warm water bath and drying during a period of 12-24 hours, the contrast agent was synthesized by the sonication process by addition of buffer and SF6 gas. The size of the contrast agent was controlled by use of either extruder or sonication methods. After synthesis of contrast agents, analysis of the size distribution of the bubbles was performed using dynamic light scattering measurement methods. The degradation curve was also evaluated by changes in the number of contrast agents via light microscopy immediate, 12 hours, 24 hours, 36 hours, 48 hours, 60 hours, 72 hours, and 84 hours after synthesis. For evaluation of the role as an US contrast agent, the echogenicity of the synthesized microbubble was compared with commercially available microbubbles (SonoVue, Bracco, Milan, Italy) using a clinical ultrasound machine and phantom. Results: The contrast agents were synthesized successfully using an evaporation-drying-sonication method. The majority of bubbles showed a mean size of 154.2 nanometers, and they showed marked degradation 24 hours after synthesis. ANOVA test revealed a significant difference among SonoVue, synthesized contrast agent, and saline (p < 0.001). Although no significant difference was observed between SonoVue and the synthesized contrast agent, difference in echogenicity was observed between synthesized contrast agent and saline (p < 0.01). Conclusion: We could synthesize ultrasound contrast agents using an evaporation-drying-sonication method. On the basis of these results, many prospective types of research, such as anticancer drug delivery, gene delivery, including siRNA or microRNA, targeted molecular imaging, and targeted therapy can be performed.

• Korean Journal of Remote Sensing
• /
• v.26 no.2
• /
• pp.251-262
• /
• 2010

In order to provide quantitative control of the standard products of Geostationary Ocean Color Imager (GOCI), on-board radiometric correction, atmospheric correction, and bio-optical algorithm are obtained continuously by comprehensive and consistent calibration and validation procedures. The calibration/validation for radiometric, atmospheric, and bio-optical data of GOCI uses temperature, salinity, ocean optics, fluorescence, and turbidity data sets from buoy and platform systems, and periodic oceanic environmental data. For calibration and validation of GOCI, we compared radiometric data between in-situ measurement and HyperSAS data installed in the Ieodo ocean research station, and between HyperSAS and SeaWiFS radiance. HyperSAS data were slightly different in in-situ radiance and irradiance, but they did not have spectral shift in absorption bands. Although all radiance bands measured between HyperSAS and SeaWiFS had an average 25% error, the 11% absolute error was relatively lower when atmospheric correction bands were omitted. This error is related to the SeaWiFS standard atmospheric correction process. We have to consider and improve this error rate for calibration and validation of GOCI. A reference target site around Dokdo Island was used for studying calibration and validation of GOCI. In-situ ocean- and bio-optical data were collected during August and October, 2009. Reflectance spectra around Dokdo Island showed optical characteristic of Case-1 Water. Absorption spectra of chlorophyll, suspended matter, and dissolved organic matter also showed their spectral characteristics. MODIS Aqua-derived chlorophyll-a concentration was well correlated with in-situ fluorometer value, which installed in Dokdo buoy. As we strive to solv the problems of radiometric, atmospheric, and bio-optical correction, it is important to be able to progress and improve the future quality of calibration and validation of GOCI.

• Journal of Legislation Research
• /
• no.44
• /
• pp.33-62
• /
• 2013

In this paper, the consolidation of ICT basic legislation and ICT special legislation concerning "Ministry of Science, ICT and Future Planning" and "Korea Communications Commission" which came on the back of governmental reorganization in recent years is discussed in the theoretical and practical aspect. Development of "data communication technology" innovatively changed the method of livelihood of mankind, the emergence of network under global dimension provided financial social benefit and posed a challenge and a threat at the same time. Form digital revolution human kind can expect to receive many important blessings. Nevertheless, there are many advantages of development of technology by digital revolution, cyberspace like online media, internet etc. has realistically many problems that must be solved. To maximum positive aspects like the expansion of freedom of expression and creating plan of economy by the advance of transmission technology is needed. And to minimize side effects of informatization is required more. The First, Special Act on ICT has an adaptation in normative standardization to be fit in media convergence beyond convergence of broadcasting and telecommunications. Henceforth, there must be established a legal basis for the achievement of protection of economic evolution and freedom of speech in digital media, information, communication technology and content development. The second, the government action is to accomplish economic development and freedom of information in structural aspect of norm. Therefore minimizing normative problem by reorganization of organization remains clearly unresolved in politics. The third, Special Act on ICT must be basic law covering info-communications field, pay telecommunication and media contents field. The forth, from a technical point of view, net neutrality, conflict of interest for digital content and so on can be fixed easily. Special Act on ICT must not only pursuit of development of industry. Special Act on ICT and pursuit of enhancing quality of life of people and preparing program to promote democratization. From now on, we need to make powerful nation of information& communications technology and in information human rights protection field got to be one step ahead of others with reference to appear all the various aspects must be brought together in the discussion of legislation process of Special Act on ICT.

• Journal of Korea Water Resources Association
• /
• v.52 no.11
• /
• pp.917-929
• /
• 2019

Denitrification in streams is of great importance because it is essential for amelioration of water quality and accurate estimation of $N_2O$ budgets. Denitrification is a major biological source or sink of $N_2O$, an important greenhouse gas, which is a multi-step respiratory process that converts nitrate ($NO_3{^-}$) to gaseous forms of nitrogen ($N_2$ or $N_2O$). In aquatic ecosystems, the complex interactions of water flooding condition, substrate supply, hydrodynamic and biogeochemical properties modulate the extent of multi-step reactions required for $N_2O$ flux. Although water flow in streambed and residence time affect reaction output, effects of a complex interaction of hydrodynamic, geomorphology and biogeochemical controls on the magnitude of denitrification in streams are still illusive. In this work, we built a two-dimensional water flow channel and measured $N_2O$ flux from channel sediment with different bed geomorphology by using static closed chambers. Two independent experiments were conducted with identical flume and geomorphology but sediment with differences in dissolved organic carbon (DOC). The experiment flume was a circulation channel through which the effluent flows back, and the size of it was $37m{\times}1.2m{\times}1m$. Five days before the experiment began, urea fertilizer (46% N) was added to sediment with the rate of $0.5kg\;N/m^2$. A sand dune (1 m length and 0.15 m height) was made at the middle of channel to simulate variations in microtopography. In high- DOC experiment, $N_2O$ flux increases in the direction of flow, while the highest flux ($14.6{\pm}8.40{\mu}g\;N_2O-N/m^2\;hr$) was measured in the slope on the back side of the sand dune. followed by decreases afterward. In contrast, low DOC sediment did not show the geomorphological variations. We found that even though topographic variation influenced $N_2O$ flux and chemical properties, this effect is highly constrained by carbon availability.

• Korean Security Journal
• /
• no.57
• /
• pp.177-203
• /
• 2018

Police Assigned to Special Guard Act was legislated in 1962 to solve issues regarding the protection of various staple industrial installations, and in 2001, the Security Services Industry Act was revised to establish an effective security system for important national facilities. Thereby the Special Guards System was instituted. The current law has two parts, with the Police Assigned to Special Guard System and Special Guards System, and many scholars have actively discussed the appropriateness of the integration of both systems to solve problems caused by a bimodal system. However, in spite of these discussions taking place in the academic world, the idea of unification lost its power when the guarantee of status regulation was established for the police assigned to special guard. Strictly speaking, police assigned to special guard is a self-guard, and a special guard is a contractual guard. So, both of them have pros and cons. Thus, it would be desirable to give a legal, constitutional guarantee for both systems by strengthening each of them and making up for the weakness of each of them rather than trying to unify police assigned to special guard and special guard. To begin this process, we need to revise unreasonable legal provisions of Security Services Industry Act and Police Assigned to Special Guard Act as below. First, since the actual responsibilities of special guards and police assigned to special guard duty are the same, we need to make the facilities which they use equal. Second, legal provisions need to be revised so that a special guard may perform the duties of a police officer, according to the Act on the Performance of Duties by Police Officers, within the facility that needs to be secured in order to prevent any vacancy in the guarding of an important national facility. Third, disqualifications for the special guards need to be revised to be the same as the disqualifications for the police assigned to special guard duty. Fourth, it is reasonable to unify the training institution for special guards and for police assigned to special guard duty, and it should be the training institution for police. On-the-job education for a security guard needs to be altered to more than 4 hours every month just like the one for police assigned to special guard duty. Fifth, for a special guard, it is not right to limit the conditions in their using weapons to 'use of weapon or explosives' only. If one possesses 'dangerous objects such as weapon, deadly weapon, and so on' and resists, a special guard should be able to use their weapon against that person. Thus, this legal provision should be revised. Sixth, penalty, range of fines, and so on for police assigned to special guard duty need to be revised to be the same as the ones for a special guard. If we revise these legal provisions, we can correct the unreasonable parts of Security Services Industry Act and Police Assigned to Special Guard Act without unifying them. Through these revisions, special guards and police assigned to special guard duty may develop the civilian guard industry wholesomely under the law, and the civilians would have a wider range of options to choose from to receive high quality security service.

• Asian Journal of Turfgrass Science
• /
• v.23 no.2
• /
• pp.331-344
• /
• 2009

Buffalograss is an important turfgrass species with excellent cold, heat, and drought tolerance. Understanding the physiological integration of buffalograss under heterogeneous conditions helps to develop cultural practices that better use limited resources for uniform turf quality. The objective of this study was to evaluate physiological integration of buffalograss under water deficit stress and the involvement of lipid peroxidation and antioxidants in the process. In one experiment, buffalograss was planted in the center of a four-compartment growth unit. Watering frequencies, once a week(+) and once in two weeks(-), were combined with the sand(S) or peat(P) in each unit to generate five total treatments(P+S-P-S+, P+P+P+P+, S-S-S-S-, P-P-P-P-, and S+S+S+S+). The average number of shoot established from the heterogeneous root-zone medium was higher than the average of four possible homogeneous media. In second experiment, single ramet in Hoagland solution($S_0$) or single ramet in Hoagland solution with 20% PEG-6000($S_s$) were compared with two connectedramets under different treatments. Treatments for connected ramets were young ramet in Hoagland solution($Y_{os}$) and old ramet in Hoagland solution with 20% PEG-6000($O_{os}$), and old ramet in Hoagland solution($O_{ys}$) and young ramet in Hoagland solution with 20% PEG-6000($Y_{ys}$). Lipid peroxidation, antioxidants, and proline showedphysiological integration between ramets subjected to different levels of water stress. Superoxide dismutase(SOD), Guaiacol peroxidase(G-POD), malondialdehyde(MDA), and free proline also showed different time courses and relative activities during the physiological integration.