• Journal of the Korea Institute of Building Construction
• /
• v.11 no.4
• /
• pp.333-344
• /
• 2011

The recent expansion in the number of housing construction projects has been accompanied by substantial improvements in construction quality, which can be attributed to the development of new construction technologies and materials. In apartment complex construction projects, numerous mechanization technologies have been adopted as part of the floor plastering process to counter increasing difficulties in securing labor and the pressing need to reduce lead time, but these have also triggered setbacks such as additional costs or loss of time to fix cracks in or loosening of floor. Cracks developing in the floor of an apartment housing unit, in terms of materials in use, are the products of a complex combination of material makeup, construction workmanship, concrete curing and the protection method. Controlling such elements from the perspective of materials in use may ensure partial success in reducing cracks, but fall short of eliminating them completely. Any attempt to prevent cracks from developing in the first place requires systematic analysis as to their potential causes and viable solutions to reduce them. On this backdrop, this paper aims to provide an analysis of potential causes of cracks found in floor plastering, and consider the mechanism of a crack stop-bar as a fundamental safeguard against them.

• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.1
• /
• pp.78-94
• /
• 2005

Purpose. The purpose of this study was to compare the effects of various surface treatments by measuring resonance frequency and histomorphometric analyses. Material and methods. In 5 adult dogs, the mandibular premolar were extracted. Six months later, 30 screw titanium implants (Dentium Co., Seoul, Korea) 6mm in length and 3.4mm in diameter, were placed in the mandibles of 5 dogs. Implants were divided into five groups following to surface treatment methods ; Group 1 is machined controls, Group 2 is sandblasted with large grit and acid-etched (SLA), Group 3 is anodized (Autoelectric Co., Korea, 660Hz, Duty10), Group 4 is hydroxyapatite(HA) coated by ion beam assisted deposition(E-beam), Group 5 is hydroxyapatite(HA) coated with Sol-gel coating process. Resonance frequency was measured implant placement immediately, and 3, 6 weeks and 10 weeks of healing perods. With the animal subject's sacrifice 10 weeks after implantation, implants were removed on bloc and histologic and computer-based histomorphometric analyses were performed. Histomorphometric analysis involved quantification of the entire bone to metal contact around the implants. Statistical analyses were performed using the SPSS for Windows (ver. 9.0 SPSS Inc.) Statistical differences were considered significant at P<0.05. Results. The results were as follows : 1) In five groups, mean value of resonance frequency analysis(RFA) were highest in group 5 (Sol-gel implant) at implantation and those of group 4 (E-beam)was highest at 10 weeks . but there was no correlation between surface treatments and RFA. 2) In all surface treatment groups, the RFA values of implants decreased until 3 weeks and increased to 10 weeks. 3) The percentage of direct bone-to-implant contact (BIC) had statistical significance between five groups in cancellous bone, (P<0.05) the percentage of bone density inside the thread had no statistical significance between five groups. (P>0.05) 4) There was a significant difference between cortical bone and cancellous bone in BIC. (P<0.05) and bone density. (P<0.05) 5) There was a correlation between the RFA value of implants at 10 weeks and BIC in cancellous bone, and between the RFA value of implants at 10 weeks and bone density in cortical bone. (P<0.05). Conclusions. These results indicate that surface treatment does not affect the implant stability in case of good bone quality.

• Journal of The Korean Association For Science Education
• /
• v.35 no.5
• /
• pp.791-804
• /
• 2015

This study aims to investigate the definition of and factors in decision on socio-scientific issues and to analyze the standards for the quality of decision-making, based on the review of studies in socio-scientific issues. This study analyzed 147 articles published in journals of the social science citation index, and the research method was followed by taxonomy analysis and analytic induction. The results showed that many of the studies did not explicitly articulate the decision-making and only dealt with a specific element of the process, not as a whole. Decision-making was categorized into the steps of identification, option, criteria, information, survey, choice, and review. In terms of the factors, the literature tackled diverse things: science knowledge, nature of science, type of issue, discussion type, belief & values, and culture. This study examined the relationship between the factors and each element of decision-making. Among the relationships, only six kinds were shown as relevant and most of factors were connected to survey. With regard to the standards, the literature relied upon balance, justification and multiplicity since many of the studies made use of Toulmin-based argumentation. This study gives some implications for standards for decision-making regarding the nature of risk and uncertainty.

• The Journal of the Korea Contents Association
• /
• v.20 no.3
• /
• pp.584-599
• /
• 2020

This study aimed to explore goals and development process of Child·youth Friendly Cities certified by UNICEF Korea and to provide a research basis for promotion and development of Child·youth friendly cities in Korea. Researchers conducted in-depth interviews with experts in two cities designated as UNICEF Child·youth Friendly Cities in early days. The findings showed that in order to successfully build and maintain friendly cities for children and youth, active interest and efforts of local governors and government officials for promoting friendly cities and policy enforcement based on four principles of child rights were required as prerequisite. In relation to managing Child·youth friendly cities, two cities selected as cases of this study provided universal social welfare programs for children and youth and expanded after-school care services for local students. Moreover they tried to promote decision making and protect rights of children and youth by allowing them to participate in community programs. The important distinctions of these cities were that they established a department exclusively for children and youth and closely cooperated with experts in private sectors. However, participants agreed that there should be more comprehensive and multilateral approach for building Child·youth friendly cities, adoption of incentive system for certification of Child·youth friendly cities and more active promotion of the UNICEF project. In conclusion, the researchers proposed policy implications.

• Journal of the Economic Geographical Society of Korea
• /
• v.15 no.1
• /
• pp.77-94
• /
• 2012

The purpose of this study is to analyze the process of vertical fragmentation of regional industries in Korea using Revealed Comparative Advantage index (RCA) and Average Propagation Length (APL). First of all, the competitiveness in regional export and substitution of regional imports were strong in the Electricity, Gas, and Water supply sector in Gyeongnam, and consumer-oriented Manufacturing sector in Incheon, Gyeongnam, and Gwangju. The high values of the APL were also found in the regions with common similarity with respect to the industrial structure and the sectors with indirect effects. In addition, the industrial sectors with high quality of infrastructure, and endowed services tended to be located in the beginning of the production chain. FInally, since manufacturing and service sectors in Seoul has higher APL, they could lead the growth of other related industries as key sectors, in the production fragmentation.

• Membrane Journal
• /
• v.6 no.3
• /
• pp.173-181
• /
• 1996

Common volatile organic compounds(VOCs) such as toluene and methanol were removed successfully from N$_{2}$ using a novel silicone-coated hollow fiber membrane module. This novel membrane is a thin film composite(TFC) and was highly efficient in removing VOCs selectively from a N$_{2}$ stream. This membrane had some innate advantages over other silicone-based membrane in that the selective barrier was ultrathin(~1 $\mu$m) and the porosity of the polypropylene substrate was high which leads to a low permeation resistance. The substram was very strongly bonded to the coating layer by plasma polymerization and can withstand a very high pressure. A small hollow fiber module having a length of 25cm and 50 fibers could remove 96~99% of toluene as well as methanol vapors when the feed flow rate was up to 60cc/min. The percent removal of VOCs were even higher when the feed inlet concentration was higher. This process is especially suitable for treating streams having a low flow rate and high VOCs concentration. The permeances of VOCs through this membrane was in the range of $4~30 \times 10^{-9}gmol/sec \cdot cm^{2}\cdot cmHg$ for both toluene and methanol, and nitrogen permeance was between $3~9 \times 10^{-10}gmol/sec \cdot cm^{2} \cdot cmHg$. High separation factor between 10~55 for toluene/N$_{2}$ and 15~125 for methanol/N$_{2}$ were obtained depending on the feed flow rate ranges and feed VOCs concentration levels.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.4
• /
• pp.297-304
• /
• 2015

This study concerns the integrated gas sensor system of wire and wireless communication by using IoT(Internet of Things) technology. First, communication part is that it delivers the detection information, which transferred by wire or wireless communication and required control procedure based on a wireless module that receives the gas leakage information from wired or wireless detector, to administrator or user's terminal. Second, receiver part is that it shows the location and information, which received from the wired detector formed by a detecting sensor's node as linking with the communication part, and transfers these to the communication part. Third, wireless detector formed as a communication module of a detecting sensor node is that it detects gas leakage and transfers the information through wireless as a packet.Fourth, wired detector communicated with the receiver part and formed as a communication module of a detecting sensor node is that it detects gas leakage, transfers and shows the information as a packet. Fifth, administrator's terminal is that it receives gas leakage information by the communication part, transfers the signal by remote-control, and shut off a gas valve as responding the information. Sixth, database is that it is connected with the communication part; it sets and stores the default values for detecting smoke, CO., and temperature; it transfers this information to the communication part or sends a gas detecting signal to user's terminal. Seventh, user's terminal is that it receives each location's default value which stored and set at the database; it manages emergency situation as shutting off a gas valve through remote control by corresponding each location's gas leakage information, which transferred from the detector to the communication part by wireless.It is possible to process a high quality data regarding flammable or toxic gas by transferring the data, which measured by a sensor module of detector, to the communication part through wire and wireless. And, it allows a user to find the location by a smart phone where gas leaks. Eventually, it minimizes human life or property loss by having stability on gas leakage as well as corresponding each location's information quickly.

• Journal of Software Engineering Society
• /
• v.29 no.2
• /
• pp.7-12
• /
• 2020

A project to establish an information system with a project cost of more than 500 million won at a local public firm is subject to the Information System Audit (hereinafter referred to as IS Audit), and the IS Auditor shall conduct audit according to the audit criteria. Recently, as blockchain technology has been applied to various fields such as manufacturing, healthcare, distribution, and public sectors beyond the financial industry, the development of systems that apply blockchain technology is increasing. The use of Hyperledger Fabric, a private blockchain, is on the rise to utilize blockchain technology in public firms and private firms. However, the newly emerging blockchain-based system is not sufficient to carry out auditing with existing audit check items, so it has no choice but to make and use audit items individually. Therefore, a need for verified audit items for systems that base on blockchain technology has emerged. In this study, we customized the Delphi process to derive audit items suitable for the system development project using the blockchain technology, and verified the completeness and accuracy of the audit items derived through a survey by the IS Auditor. This research will be of direct help to the IS Auditor, and it is expected that operators and organizers who provide services through the blockchain-based system will also contribute to improving the quality of the system.

• Food Science and Preservation
• /
• v.18 no.5
• /
• pp.773-778
• /
• 2011

This study investigated the alcohol fermentation characteristics of citrus hydrolysate by adding various sugars(sucrose, honey, fructose and fructooligosaccharide). As a result, the alcohol content was shown to be similar among all the sugars. Fructose, glucose, sucrose and maltose were detected as a major free sugar. In particular, the contents of fructose and glucose were shown to be higher in sucrose addition, lactic, citric and malic acids were detected as major organic acids of citrus wine. When the sensory characteristics of citrus wines were compared, flavor was shown to have a sensory score of 5.1 in sucrose addition, showing the most preference. However, no significant difference in preference was found among the sugars. Color, taste and overall acceptability were shown to have the most preference in sucrose addition, and then in honey, fructose, and fructooligosaccharide in order. Therefore, a further study on the improvement of quality and sensory preference using aging process and complex sugars is required.

• Journal of the East Asian Society of Dietary Life
• /
• v.24 no.6
• /
• pp.793-801
• /
• 2014

This study evaluated the qualitative properties of lotus root (Nelumbo nucifera) peels as food materials. Proximate composition, sweetness, pH, total acidity, color, mineral, fatty acid, free sugar and organic acid contents of preprocessed lotus root were measured. Crude moisture, protein, and total fiber contents of non-peeled treated Lotus roots were higher than those of peeled treated lotus roots (p<0.05). Lightness and yellowness of color were reduced by peeling process, whereas redness increased (p<0.05). The mineral contents of Mg, Ca, Fe and Na were higher in non-peeled lotus roots, whereas peeled treated lotus root showed higher K contents (p<0.05). The major fatty acids were palmitic, oleic, linoleic and linolenic acids. The total free sugar content of non-peeled lotus roots was higher than that of peeled treated lotus roots (p<0.05). Glucose content was not significantly different, whereas fructose, sucrose, and maltose contents were significantly different. The organic acid and free amino acid contents were higher in peeled lotus roots (p<0.01).