• Korean Journal of Oriental Medicine
• /
• v.14 no.2
• /
• pp.107-112
• /
• 2008

Although the pulse diagnosis position, Guan is apart from Cun or Chi by only $10{\sim}20$ mm at most, traditional medical doctors applies different indent pressures and even they states different pulse images are felt at Cun, Guan and Chi, To support their clinical behaviors, in this study, we tested statistically whether there are differences in pulse waveform measured at these three positions with SphygmoCor system used world widely, A 30 years old female subject without any evidence of cardiovascular diseases was involved in this experiment. Radial pulse waves were recorded at three different positions on left lower arm 10 times at three positions-Cun, Guan and Chi. With ANOVA, we tested whether, among three different positions. there are any differences in 12 parameters of radial pulse waveform and in estimated AIx(Augmentation Index) as an arterial stiffness index extracted from radial pulse waveform. As results, differences in optimal indent pressure h0 were observed at different measuring positions(P<0.001) but not significantly different. And pulse pressure his were found to be different(Chi$22.60{\pm}3.06%,\;18.60{\pm}3.37%\;and\;26.4{\pm}5.02%$ respectively. Consequently. AIx at Gwan seems to be lowest and that at Chi seems to be highest. So. we assert the AIx at Chi is likely to be overestimated. In further studies. we want to examine what make differences in these parameters between measuring positions. And it also seems to be worthy to investigate the relationship between the depth of radial artery and AIx. And, ultimately, we need to determine the best measuring process including measuring position, hold-down pressure, signal quality validation and so on. so to achieve the optimal waveform which represents subject's health condition for both western medicine and traditional medicine.

• The KIPS Transactions:PartB
• /
• v.10B no.2
• /
• pp.143-150
• /
• 2003

Error concealment plays an important role in combating transmission errors. Methods of error concealment which produce better quality are generally of higher complexity, thus making some of the more sophisticated algorithms is not suitable for real-time applications. In this paper, we develop temporal and spatial error resilient video encoding and data hiding approach to facilitate the error concealment at the decoder. Block interleaving scheme is introduced to isolate erroneous blocks caused by packet losses for spatial area of error resilience. For temporal area of error resilience, data hiding is applied to the transmission of parity bits to protect motion vectors. To do error concealment quickly, a set of edge features extracted from a block is embedded imperceptibly using data hiding into the host media and transmitted to decoder. If some part of the media data is damaged during transmission, the embedded features are used for concealment of lost data at decoder. This method decreases a complexity of error concealment by reducing the estimation process of lost data from neighbor blocks. The proposed data hiding method of parity bits and block features is not influence much to the complexity of standard encoder. Experimental results show that proposed method conceals properly and effectively burst errors occurred on transmission channel like Internet.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2006.11a
• /
• pp.396-401
• /
• 2006

A "Housing Performance Grade Indication System" that is bound to present the grade in housing designs has been executed since January 2006 in order to build sustainable housing and supply high quality housing. Thus, users are able to select their housing based on certain comparisons in housing performances, and providers can be exactly evaluated using precise standards according to the execution of this system. The objective of this study is to propose a guideline in designs according to the grade of housing as a reasonable decision making tool in order to obtain a high grade in housing performance grades under the execution of the "Housing Performance Grade Indication System". In order to perform this goal, this study examines the performance evaluation item and evaluation guidelines in the "Housing Performance Grade Indication System" and analyzes relative systems and guidelines executed in the present time to investigate certain relativeness for this system. The housing performance evaluation item can be classified four different categories according to the characteristics of evaluation guidelines. Then, the system of a design guideline is configured to propose a reasonable design guideline according to the grade of housing performances. It is evident that the design guideline proposed in this paper will support the reasonable decision making to obtain a high grade in housing performances for the designer and constructor in the process of a housing project.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2006.11a
• /
• pp.478-482
• /
• 2006

The domestic enterprises in order to secure the freshness location of market from the international competition which is keen are propelling a price and a quality high position strategy steadily. It is put in competitive situation with the overseas enterprises and even from construction industry it follows in construction market opening and there is not another idea to the research the management strategies, directions and focus competitive elements of the enterprise against, what it sees consequently and to rise to the priority where the competitive power reinforcement of the enterprise is important, it becomes. Competitive power of like this enterprise for a reinforcement the technique which induces a big interest 6 Sigma is technique from the many companies. 6 sigma preceding researches of manufacturing and service industry the fact that it is accomplished with the object which will carry most. The research which relates with construction industry is staying to an introduction of 6 sigma the investigation phase, the actual introduction introduces and "S" construction there is not only a possibility against the application result of having a limit because it is applying. It is like that but like referring to a minute description for the international competitive power security which it follows in the change which market environment is sudden 6 sigma the introduction will judge, indispensability development of the logical propriety against hereupon and it will reach and it verifies the question investigation for to lead, 6 sigma of the construction companies it confirms the application possibility and presents the propulsion model as 6 sigma the fact that overcoming the limit characteristic of that introduction application as objective of sample research means it will do.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.2
• /
• pp.610-619
• /
• 2016

Digital manufacturing (DM) technology helps engineers design products promptly and reliably at low production cost by simulating a manufacturing process and the material behavior of a product in use, based on three-dimensional digital modeling. The computing infrastructure for digital manufacturing, however, is usually expensive and, at present, the number of professional design engineers who can take advantage of this technology to a product design accurately is insufficient, particularly in small and medium manufacturing companies. Considering this, the Korea Institute of Science and Technology Information (KISTI) and H University is operating a DM track in the form of Industry-University-Research Institute collaboration to train high-performance-computing-based DM professionals. In this paper, a series of courses to train students to work directly into DM practice in industry after graduation is reported. The operating cases of the DM track for two years since 2013 are presented by focusing on the progress in establishment, lecture and practice contents, evaluation of students, and course quality improvement. Overall, the track management, curriculum management, learning achievement of students have been successful. By expediting more active participation of the students in the track and providing more internship and job offers in the participating companies in addition to collaborative capstone design projects, the track can be expanded by fostering a nationwide training network.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.1
• /
• pp.284-295
• /
• 2012

The purpose of this study was to develop and evaluate patient safety reporting promoting strategy for nurses to improve nursing care quality. The process included three phase - construction, implementation and evaluation phase. Before the construction phase has two kinds of subcategories as analysis and verification. Analysis phase was consisted of literature review and field study, and verification was conducted by two specialist. At the construction phase, patient safety reporting system, educational materials, planning for public relation, and reward preparation were developed. After implementation during 12 weeks, we evaluated pre-post scores of satisfaction, stress of conscience, job performances. The participants were 51 nurses working for a hospitals. The program was developed and then administered to the experimental group for 12 weeks. One group pretest-posttest design was used for this study. Data were analyzed using descriptive analysis, paired t-test with the SPSS WIN 18.0 program. After the intervention, job performance scores improved significantly from 3.62 to 3.75(t=2.653, p=.009). But job stress didn't changed significantly(t=.785, p=.434). These strategy can be applied to many clinical setting that will be helpful to promote patient safety reporting for nurses.

• The KIPS Transactions:PartD
• /
• v.13D no.2 s.105
• /
• pp.271-278
• /
• 2006

This paper presents industry feedback and a case of improvement trial on enabling reuse driven software development which is one of several activities to improve software quality and productivity in a company which develops software that are embedded into consumer electronic products. Several case studies will be introduced that are related to software reuse strategies and practices to show how to establish environment for reuse basis in a company, how to apply it to development team and project and how to improve that through trials and errors. To enable reuse-oriented software development in a huge company, integrated and focused approach is needed among technical, management and environmental point of view. We tried to solve that problem in technical field with reuse method, in management filed with reuse metric and in environment field with reuse repository. The characteristics of our software development environment could be summarized as below. The first, embedded software which would not independent to hardware devices and the second, it is very huge company which develops extremely various products by many different organization with different domain characteristics and the third, development lead time is extremely short and many variation models are stems from basic models. We expect that our study would give contribution to industry struggling to solve similar problem for presenting our experience and could be a reference model for enabling software reuse in a real world practically.

• Resources Recycling
• /
• v.23 no.5
• /
• pp.44-54
• /
• 2014

A standard plastic garbage bag which was discarded from Incheon Metropolitan City was composed of 4.5% recyclable resources (aluminum cans 0.2%, steel cans 2.5%, glass 1.8%), 92.5% resources with recoverable energy (papers 23.0%, plastics 15.5%, combustible etc. 54.0%) and 3.0% non-combustible etc. Recycling is more effective than landfilling for aluminum cans, steel cans, and glass. The energy recovery process using solid refuse fuel (SRF) is more effective than incineration for papers and plastics. Incineration is more effective than recycling for combustible etc. 2,068,948 Million Btu of total energy savings and 21,008 $MTCO_2E$ of total GHG reductions were obtained by the application of the proposed scheme. The total energy savings were equivalent to an economic benefit of 422 billion won per year. The total GHG reductions were equivalent to a GHG benefit of 4,119 passenger cars not running per year. The lower calorific value of the combustible materials was obtained to be 1,936 kcal/kg of papers, 5,079 kcal/kg of plastics and 2,462 kcal/kg of combustible other resources, respectively. If papers and plastics are properly mixed, the mixture can be used as SRF. The lower calorific value of combustible other resources does not meet the quality criteria for refuse derived fuel, therefore its components are inappropriate to used as solid refuse fuel.

• Journal of KIISE
• /
• v.45 no.1
• /
• pp.36-44
• /
• 2018

Due to the advent of the 4th Industrial Revolution, it is imperative that we aggressively continue to develop state-of-the-art, cutting edge ICT technology relative to autonomous vehicles, intelligent robots, and so forth. Especially, systems based on convergence IT are being developed in the form of CPSs (Cyber Physical Systems) that interwork with sensors and actuators. Since conventional CPS specification only expresses behavior of one system, specification for collaboration and diversity of CPS systems with characteristics of hyper-connectivity and hyper-convergence in the 4th Industrial Revolution has been insufficiently presented. Additionally, behavioral modeling of CPSs that considers more collaborative characteristics has been unachieved in real-time application domains. This study defines the non-functional requirements that should be identified in developing embedded software for real-time constrained collaborating CPSs. These requirements are derived from ISO 25010 standard and formally specified based on state-based timed process. Defined non-functional requirements may be reused to develop the requirements for new embedded software for CPS, that may lead to quality improvement of CPS.

• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.1
• /
• pp.135-143
• /
• 2010

The national base map has its value sand roles as the basic spatial information of the nation. The current national base map that is a 1/5,000 digital map, however, has failed to perform its roles as basic spatial information due to the limitations with its quality and accuracy and requires measures to complement them. Thus this study set out to suggest ways to advance the current 1/5,000 national base map, selected topography and natural features of a digital map that could be made with GSD 0.25m digital aerial photographs, and set up the optimal ways to make a digital map by conducting an experiment of making an optimal digital map with such photographs. It also analyzed the map made with GSD 0.25m digital aerial photographs for accuracy and usability. In order to establish a set of criteria of making a digital map with GSD 0.25m digital aerial photographs, the investigator carried out analyses and picked topography and natural features items, which include 9 large categories, 31 medium categories, and 509 small categories. Then an experiment of making a digital map was conducted according to the digital map making method. As a result, solid drawing was selected as the optimal way to making a digital map, and the optimal process was established. Using the research achievements, a model digital map was made with GSD 0.25mm digital aerial photographs. The map recorded about two times horizontal and vertical location accuracy than the old 1/5,000 digital map and was capable of detailed descriptions of topography and natural features. A new national base map made with GSD 0.25m digital aerial photographs will provide reliable spatial data, thus increasing the level of satisfaction among people and the level of advancement of national base maps.