• Fisheries and Aquatic Sciences
• /
• v.20 no.11
• /
• pp.30.1-30.10
• /
• 2017

Small-scale fish farmers in developing countries are faced with challenges owing to their limited information on aquaculture management. Nile tilapia farmers in Teso North Sub-County recorded lower yields than expected in 2009 despite having been provided with required inputs. Water quality was suspected to be the key factor responsible for the low yields. This study sought to assess the effects of earthen pond water physico-chemical parameters on the growth of Nile tilapia in six earthen fish ponds under semi-intensive culture system in Teso North Sub-County. The study was longitudinal in nature with pond water and fish being the units of analysis. Systematic sampling was used to select five ponds while a control pond was purposively selected based on its previously high harvest. Four ponds were fed by surface flow and two by underground water. Each pond was fertilized and stocked with 900 fry of averagely 1.4 g and 4.4 cm. Physico-chemical parameters were measured in-situ using a multi-parameter probe. Sixty fish samples were randomly obtained from each pond fortnightly for four months using a 10 mm mesh size and measured, weighed and returned into the pond. Mean range of physico-chemical parameters were: dissolved oxygen (DO) 4.86-10.53 mg/l, temperature $24-26^{\circ}C$, pH 6.1-8.3, conductivity $35-87{\mu}S/cm$ and ammonia 0.01-0.3 mg/l. Temperature (p = 0.012) and conductivity (p = 0.0001) levels varied significantly between ponds. Overall Specific Growth Rate ranged between 1.8% (0.1692 g/day) and 3.8% (1.9 g/day). Ammonia, DO and pH in the ponds were within the optimal levels for growth of tilapia, while temperature and conductivity were below optimal levels. As temperature and DO increased, growth rate of tilapia increased. However, increase in conductivity, pH and ammonia decreased fish growth rate. Temperature and DO ranging between 27 and $30^{\circ}C$ and 5-23 mg/l, respectively, and SGR of 3.8%/day and above are recommended for higher productivity.

• Journal of Technology Innovation
• /
• v.25 no.4
• /
• pp.263-284
• /
• 2017

The purpose of this research is to analyze the performance of national R&D projects and to find out measures to improve the performance indicators, focusing on energy HRD projects. The main analysis target is 86 energy manpower projects supported since 2010. The performance indicators of the energy HRD projects are related to the research capacity, the number of emission workers, industry-university linkage, job creation and so on, and analyzed by using the 11 indicators of human resource performance index called KPI index. As a result of analyzing the attainment level of the proposed target by task, the index with the highest achievement level is the corporation linkage rate, and the index with the lowest achievement level is the participating company employment. As a result of examining the effects of job creation in company - linked activities, it was found that the greater the number of participating companies in the business, the greater the employment creation effect of the number of internships. As a result of the above analysis, the following policy alternatives are proposed. First, it is necessary to consider adding indicators that can express the quality performance of the business and performance indicators that can express actual business linkages. Second, it is necessary to strengthen the management of differentiated performance indicators according to policy performance targets and major target groups. Third, it is necessary to improve information input and accumulation system along with improvement of performance index.

• Korean Chemical Engineering Research
• /
• v.46 no.2
• /
• pp.316-329
• /
• 2008

Recently the increased attention pays on the processing of multiple, relatively low quantity, high value-added products resulted in adoption of batch process in the chemical process industry such as pharmaceuticals, polymers, bio-chemicals and foods. As there are more possibilities of the improvement of operations in batch process than continuous processes, a lot of effort has been made to enhance the productivity and operability of batch processes. But the chemical process industry faces a range of uncertainties factors such as demands for products, prices of product, lead time for the supply of raw materials and in the production, and the distribution of product. And global competition has made it imperative for the process industries to manage their supply chains optimally. Supply chain management aims to integrate plants with their supplier and customers so that they can be managed as a single entity and coordinate all input/output flows (of materials, information) so that products are produced and distributed in the right quantities, to the right locations, and at the right time.The objective of this study is to solve the purchase, distribution, production planning and scheduling problem, which minimizes the total costs of production, inventory, and transportation under uncertainty. And development of SCM model in chemical industry including batch mode operations. Through that, the enterprise can respond to uncertainty. Also integrated process optimal planning and scheduling model for manufacturing supply chain. The result shows that, the advantage of supply chain integration are quality matters seen by customers and suppliers, order schedules, flexibility, cost reduction, and increase in sales and profits. Also, an integration of supply chain (production and distribution system) generates significant savings by trading off the costs associated with the whole, rather than minimizing supply chain costs separately.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.5
• /
• pp.20-28
• /
• 2016

A Ubiquitous City (U-city, Smart City) is one that ties information communications technologies (ICT) into many facets of city construction, thereby implicitly intending to function as a smart city that aims to be efficiently managed as well as provide an enhanced standard of living for its residents. Laws related to the construction of such ubiquitous cities point to integrated city management centers, intelligent facilities, and U-City infrastructure, among others, as central components of U-Cities, but do not provide a standard for these structures. Consequently, building of U-Cities by local governments are based on arbitrary judgments constrained the myriad of practical limitations that they face. Such ambiguity brings to light the need to find ways to improve the quality of these efforts. The first and second stages of this research examine the status of the components of a U-City -ubiquitous planning, technology, infrastructure, and services - and undertakes a comprehensive review thereof, with evaluation criteria formulated on the characteristics of stability, connectivity, goal-orientation, and development potential. In the research's third stage, a realistic and detailed evaluation index by which U-Cities can be renewed, demonstrated, and applied (???) is introduced in a step-by-step fashion, which will allow for local governments to properly assess the standard of their U-City in relation to the realities of the locality. Through the research result, it is expected that the index will become a part of the continued development and advancement of the "smart" character of an autonomous U-City at the local scale, and contribute to the overall revitalization of the U-City.

• Journal of Korean Society of Forest Science
• /
• v.106 no.2
• /
• pp.111-120
• /
• 2017

The best source of information on the conservation status of species at a global scale is the IUCN Red List of Threatened Species. Until now, 236 vascular plants from Korean peninsula have been evaluated using the IUCN red list categories and criteria. It indicated that five taxa were considered as critically endangered, 20 as endangered and nine as vulnerable species as a threatened status. On the other hand, the rest (189 taxa) were assessed as a least concern, which did not qualify for threatened species categories. Korea Ministry of Environment published a revised version of 57 species list by re-classifying endangered species with idiosyncratic qualitative criteria for two levels (I and II) followed by status reviews in 2011. However, two thirds species proposed by Ministry of Environment do not qualify as threatened. The major difficulties found in applying IUCN Red List criteria at the global scale was a lack of knowledge on the status of species at broader geographic scales and the perceived difficulty the causes. The lack of consistency between two lists constrains the prioritization of species-based conservation work at the national level. Due to a lack of centralized monitoring data for most species, this status is largely qualitatively and so it carries a high level of uncertainty. This is reflected in the high number of species with an unknown population trend. The current list of endangered species of flora and fauna by the Ministry of Environment should be recognized as the national list (local and population extinction), which is different from the IUCN Red list due to the different geographical contexts. Also, it is necessary to improve the quality of evaluation and conservation management system rather than presenting massive number of endangered species list.

• Fire Science and Engineering
• /
• v.29 no.2
• /
• pp.44-53
• /
• 2015

This study is a survey research to improve the fire-fighting ambulance interior design safer and more efficient to identify the type of structure and functional problems 119 ambulance. When the paramedics and four degrees to over 755 people modify the target report and related literature on the future development of an ambulance for patient safety at the 2007 British National Patients Safety Agency (NPSA) and was used as a complementary tool. General characteristics questionnaire was composed of items for your design improvements for ambulance promote safety and efficiency. The data were collected by distributing a questionnaire e-mail or in person. The collected data were processed using the SPSS 20.0 statistical program, the general characteristics as frequency analysis, percentage, ambulance interior design improvement-related items were analyzed using the chi-square verified. As a result, this research elicited that vans converted fire ambulance cars have a problem with the narrow interior space and truck converted fire ambulance cars should be comfortable to drive in ride quality. In addition, we also found that the improvement of paramedics treatment position and the paramedic's personnel safety belt are required. Based on these results, we propose that a number of improvements are needed in the fire-fighting ambulance car.

• Journal of Digital Convergence
• /
• v.12 no.3
• /
• pp.299-308
• /
• 2014

Nowadays, dental tourism becomes phenomenon because of its cost-effectiveness, improvement of quality and technology, dental infrastructure, and attractive tourism. Korea as one of popular destination country had established dental system. On the other hand, Indonesia with high number of population is potential market for dental tourism. The aim of this study is to compare the knowledge, attitude, and experience towards dental tourism among Indonesian and Korean. Two cross-sectional descriptive surveys were conducted to collect the data. This study was used one questionnaire in two different languages due to nature of the study population. Data from a total 923 of Indonesian from 33 provinces in Indonesia was collected during the period from April through July 2010. On the other hand, during May until August 2010 data from a total of 312 Korean were obtained. It was found that the majority of participants in both countries had never heard about dental tourism. Among those who had heard about dental tourism, the most common source was internet. Ownership of dental insurance had significant relationship with knowledge of dental tourism among Indonesian while level of education and monthly internet usage had it among Korean (p<0.05). Attitudes of Indonesian and Korean people about dental tourism were negative due to assumption that dental services in their home country were satisfactory. 100% of Korean had no experience on dental treatment in other countries while 2.4% of Indonesian had experience with it. In conclusion, regarding all these evidences, comprehensive and positive information about dental tourism is needed to enhance people's knowledge, attitude, and experience.

• Journal of Distribution Science
• /
• v.13 no.1
• /
• pp.27-33
• /
• 2015

Purpose - The ICT market in the EU is lagging behind that of the US; however, algorithm and software development within the EU have grown steadily, and they involve focusing on the creative cultural convergence conceptualized as part of Horizon 2020 and connecting neighboring markets in the EE and the Mediterranean region. It is essential to study the requirements to market the EU's creative ICT development in emerging industrial countries after examining its applicability in these countries. Research design, data, and methodology - This study deals with data pertaining to the EU's creative industry and competitive edge. The global cultural expansion of the EU facilitates a new concept involving not only low-cost IT products to enhance local cultural artifacts through R&D and the construction of efficient infrastructure services, but also information exchange with a realistic commercialization of the technology that can be applied for creative cultural localization. In the European industry, research on algorithms has been applied for the benefit of consumers. We investigated how the process is conducted in the EU. Results - Europe needs to adjust its economic structure to the local culture as part of IT distribution convergence. The convergence has been converted into a production algorithm with IT in the form of low-cost production. This is because there is an attempt to improve the quality of transport infrastructure, workforce availability, and the distribution of the distance to the local industries and consumers, using IT algorithms. Integrated into the manufacturing industry, based on the ICT infrastructure and solutions, smart localized regional clusters are formed with the help of grafting. Europe has own strategy to increase the number of hub-and-spoke cities. Europe is now becoming integrated, with an EPC system for regional cooperation rather than national competition in ICT technology. Europe has also been recognized in this study as changing the step-by-step paradigm for global competitiveness through new creative culture industries. Conclusions - As a result, there are several ways of converging with others through EU R&D intensity; therefore, the EU can be seen as successfully increasing marginal value, which is useful in developing a special industrial cluster or local cultural cities that create converged development by connecting people and objects with IT. In fact, when compared to the US, Europe has a strong culture and the car industries have a tendency to overshadow the IT industries with integration of services in IT distribution. Considering the rapid environmental changes, the convergence of IT services is likely to take place in Europe, similar to the pharmaceutical industry and the automotive industry. This requires a focus on human resources and automated systems management. The trend is to move away from low-wage industries, switched to key personnel centers of the local university-industry. EU emphasizes the creation of IT market demand in Europe involving local cultural convergence for marketing as the second step to strengthen the economic hub-and-spoke areas.

• Journal of Korean Society on Water Environment
• /
• v.35 no.3
• /
• pp.224-233
• /
• 2019

Nitrogen components in liquid manure can reduce safety and quality of environment harmfully. To minimize the environmental risks of manure, understanding fate of manure in environment is necessary. This study aimed at investigating applicability of a simplified Level III fugacity model for simulating $NH_3-N$ component to analyze environmental fate and transport of $NH_3-N$ in liquid manure and to provide basis for improving management of N in the liquid manure system and for minimizing the environmental impacts of N. The model simulation conducted for four environmental compartments (air, water, soil, and rice plants) during rice-cropping to trace $NH_3-N$ component and provided applicability of the Level III fugacity model in studying the environmental fate of $NH_3-N$ in manure. Most of $NH_3-N$ was found in water body and in rice plants depending upon the physicochemical properties and proper removal processes. For more precise model results, the model is needed to modify with the detailed removal processes in each compartment and to collect proper and accurate information for input parameters. Further study should be about simulations of various N-typed fertilizers to compare with the liquid manure based on a modified and relatively simplified Level III fugacity model.

• Informatization Policy
• /
• v.29 no.3
• /
• pp.26-47
• /
• 2022

"The certification of compliance of new products of industrial convergence" (hereinafter referred to as "certification of compliance") is a legal certification system in accordance with the Industrial Convergence Promotion Act through which a convergence new product can be officially certified without legislation when the certification standards applicable to the product are not yet provided. Unlike other certification systems, the certification of compliance is characterized by the role of resolving the certification difficulties driven by the regulatory lag of convergence new products. Nevertheless, studies that analyzed the certification of compliance in detail from the viewpoint of regulatory improvement were surprisingly rare. Through the sequential matching of the steps of certification of compliance with the process from the occurrence of a regulatory problem to resolution, our study provided clear understanding as to how the regulatory lag could be reduced by the procedure for certification of compliance. Furthermore, we divided the perspective on regulatory lag management into quantitative and qualitative, and the structures and practices of certification of compliance were then analyzed from the two perspectives. By doing this, the present study emphasized that the fundamental reason the certification of compliance could effectively solve the regulatory lag problem of convergence new products was not only the quantitative elements such as legal deadlines for each step but also several qualitative approaches to securing the quality of every stage.