• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.993-1000
• /
• 2009

In general, a drilled shaft embedded in weathered rock has a large load bearing capacity. Therefore, most of the load tests are performed only up to the load level that confirms the pile design load capacity, and stopped much before the failure load of the pile is attained. If a reliable failure load value can be extracted from the premature load test data, it will be possible to greatly improve economic efficiency as well as pile design quality. The main purpose of this study is to propose a standard for judging the reliability of the failure load of piles that is obtained from extrapolated load test data. To this aim, eleven static load test data of load-displacement curves were obtained from testing of piles to their failures from 3 different field sites. For each load-displacement curve, loading was assumed as 25%, 50%, 60%, 70%, 80%, and 90% of the actual pile bearing capacity. The limited known data were then extrapolated using the hyperbolic function, and the failure load was re-determined for each extrapolated data by the ASCE 20-96 method (1997). Statistical analysis was performed on the reliability of the re-evaluated failure loads. The results showed that if the ratio of the maximum-available displacement to the failure-load displacement exceeds 0.6, the extrapolated failure load may be regarded as reliable, having less than a conservative 20% error on average. The applicability of the proposed standard of judgment was also verified with static load test data of driven piles.

• Journal of Arbitration Studies
• /
• v.25 no.2
• /
• pp.71-96
• /
• 2015

This paper deals with the annulment of the ICSID(International Centre for Settlement of Investment Disputes) arbitral award. The annulment of the ICSID is characterized by the fact that it can be made possible through the special committee of ICSID only. The annulment of the ICSID was constructed on the premise that it is not an appeal procedure. However in the initial period, it was strongly criticized as it allowed new trials or duplicated many of the functions of an appeal and it broke down the boundary between the two systems. Although the trend seemed to be corrected through its 2nd and 3rd generations, it was still criticized for functioning as a new trial. It is approaching its 4th generation. On the other hand, with the activation of investment agreement arbitration based on ICSID and FTA, a certain degree of consistency is required for the ICSID arbitralaward. Also, with the emphasis on the public features of the arbitration for the investment agreement, the necessity of an appeal system is presented. The ICSID Secretariat published the "Opinion on the Appeal Procedure" in 2004 but as the system was criticized as too early due to the cost allocation problem and others, its adoption of an appeal procedure has been delayed. This paper focuses on how the currently incomplete ICSID arbitration judgment annulment system shall be used. Although it is still hardto expect the quality and consistent arbitral award annulment in the ICSID, this paper suggests that the "annulment without the actual new trial" using the restricted authority of a special commission in a creative way shall be pursued rather than just the actual new trial with or without annulment, thus going back to the original concept of the ICSID arbitral award annulment.

• Journal of Korean Society of Archives and Records Management
• /
• v.20 no.3
• /
• pp.77-97
• /
• 2020

This study seeks to analyze the concepts of authenticity and reliability of records and apply them to the criteria for judging authoritative records subject to legal management. While reliability is determined by the degree of completeness and control in the records creation stage, authenticity is ensured by preventing manipulation and tampering that occur after records creation. Authoritative records with reliability in the creation stage are legally subject to management, so such records can be subject to punishment if they are destroyed because of negligence. It is necessary to take active measures to ensure reliability, continuous authenticity after creation, and complete records creation by controlled procedures and methods before records capture. The lack of such an evidential characteristic does not mean that it is not a record, and such records are also created in reality, managed in a system, and delivered to the next generation as a representation of social memory and activities.

• Journal of Educational Research in Mathematics
• /
• v.10 no.1
• /
• pp.35-55
• /
• 2000

There seems to be a public consensus that the content of Korean mathematics textbooks is extensive and of a high level of difficulty. However, such judgment is the result of a generalization based on individual experience or on the results from comparisons of the international levels of achievement. Therefore, a more objective and stricter approach to the determination of the quantity and level of difficulty of mathematics content is necessary. For this purpose, this study has compared the content of Koreas 6th and 7th junior high school curriculums, and the Korean mathematics curriculum to textbooks of the United States, which has a considerable influence on the making of Korean mathematics textbooks. First of all, a comparison of Koreas 6th and 7th junior high school mathematics curriculums showed a slight reduction in the total quantity of content, as more content was deleted than was added in the 7th curriculum. However, given the fact that the number of hours of mathematics classes has been reduced, the reduction in content cannot be regarded as anything more than a simple reflection of the reduction in hours, proving that the 7th curriculum has not met its revision objective of reducing the content by 30%. Meanwhile, the comparison of the United States junior high school mathematics textbooks to Korea's 7th curriculum showed that the 7th grade content in the United States was much broader, encompassing content which in Korea ranged from the 2nd grade of elementary school to the 2nd year of junior high school. Therefore, on the surface, it may appear that the overall level of content in the American mathematics textbook is lower than that of the Korean. However, there are several cafes, such as statistics and probability, where certain content was more difficult and introduced at an earlier grade in the United States than in Korea. In fact, it can be said that Korea students tend to find content of the mathematics textbooks to be harder than they actually are because they are delivered as a mere aggregate of algorithms, with little consideration to its application in their everyday lives. In this respect, there is much room for improvement on the mathematics textbooks of Korea.

• Journal of Astronomy and Space Sciences
• /
• v.30 no.4
• /
• pp.327-334
• /
• 2013

The purpose of this study is to develop an observation program for obtaining effective flat images that are necessary for photometric observation. The development of the program was achieved by improving the existing method for obtaining twilight flat images. The existing method for obtaining twilight flat images acquires flat images by observing the sky light after sunset or light before sunrise. The decision of when to observe flat images at each night is solely dependent on the judgment of an observer, and thus the obtained flat images for particular nights may not be clean. Especially, in the case of the observatories where an automated observation system is in operation, there is a difficulty that an observer should pay attention during sunrise and sunset in order to obtain flat images. In this study, a computer program is developed to improve this inconvenience and to efficiently perform photometric observation in the observatories where an automated observation system is applied. This program can obtain flat images by calculating the time for obtaining flat images automatically and the exposure time using a numerically calculated function. When obtaining twilight flat images at dusk and at dawn, the developed program performs automated observation and provides effective flat images by acquiring appropriate exposure time considering the sunrise and sunset times that vary depending on the day of observation. The code for performing this task was added to Obs Tool II (Yoon et al. 2006), which is the automated observation system of the Chungbuk National University Observatory, and the usefulness of the developed program was examined by performing an actual automated observation. If this program is applied to other observatories where automated observation is in operation, it is expected that stable and high-quality flat images could be obtained, which can be used for the pre-processing of photometric observation data.

• Fire Science and Engineering
• /
• v.23 no.3
• /
• pp.131-137
• /
• 2009

This study measured smoke control damper leaking amount of condition of various kinds examination regarding AMCA Standard 500-D-98. As result of study establish because smoke control damper leaking amount performance curve that use tester data of engineering applies right design method of smoke control system and test method design, drawing examination, performance test and do so that right comprehension and performance about skill may be defined. Also user wishes to prove performance of smoke control system and construct smoke control system of reliable performance-based design derive smoke control damper quality improvement continuously selection of smoke control damper by performance judgment of performance curve.

• International Journal of Internet, Broadcasting and Communication
• /
• v.11 no.2
• /
• pp.67-75
• /
• 2019

"No IP, No Content" has become a phenomenon in the content industry, high-quality IP has a strategic importance. It has become a Trinity in the movie-anime-game basic package, Competition is more intense. However, there is a tremendous amount of know-how hidden behind the use of IP to operate games well. We are worth exploring in detail. The research and analysis of digital IP market, the advantages and disadvantages will be the focus of our pragmatic research. As an emerging market in the digital industry, China has great research value. This paper analyzes the status quo of the current Chinese market by comparing the mature US and Japanese markets. For example, the research of American Disney Company analyzes the mature market structure of Japan. compared with the excellent case of the Chinese market legend of qin. By studying the current situation of China's digital market, analyzing the interest trends of the customer base, discovering existing problems and improving the accuracy of the prediction and judgment of the Chinese digital market in the future.According to the survey, the IP heat is mainly concentrated in six categories of games, animation, TV, variety, movies, and novels. At present, the most popular IP of manufacturers have three major categories. This article will conduct research and analysis on digital IP, and analyze the market status of China, the United States, and Japan and the research on outstanding representative works in the market.

• Korean Journal of Metals and Materials
• /
• v.46 no.10
• /
• pp.672-682
• /
• 2008

The resistance spot welding of TRIP590 steels was investigated to enhance understanding of weld fracture during tensile-shear strength (TSS) test. The main failure modes for spot welds of TRIP590 steels were nugget pullout and interfacial fracture. The peak load to cause a weld interfacial failure was found to be related to fracture toughness of the weld and the weld diameter. Although interfacial fracture occurred in the samples, the load carrying capacity of the weld was high and not significantly affected by the fracture mode. Substantial part of the weld exhibits the characteristic dimple (or elongated dimple) fractures on interfacial fractured surface, in spite of the high hardness values associated with the martensite microstructures. The high load-bearing ability of the weld is directly associated with the area of ductile fracture occurred in weld. Therefore, the judgment of the quality of resistance spot welds in TRIP590 steels, the load carrying capacity of the weld should be considered as an important factor than fracture mode.

• Journal of Korean Society of Rural Planning
• /
• v.27 no.1
• /
• pp.21-28
• /
• 2021

Since 2001, the Pangyo district multipurpose rural water development project has been promoted as a new target project for stable supply of agricultural water and improvement of the living environment of rural areas in Seocheon-gun. Detailed data analysis and logic must be reinforced, focusing on the items reorganized by the reorganization of the preliminary feasibility study. The purpose of this study is to promote the smooth promotion of projects by conducting a policy effect assessment following the reorganization of the preliminary feasibility study system. This study conducted a policy assessment of agricultural infrastructure improvement project for preliminary feasibility study. The policy assessment is divided into three parts: project implementation conditions, policy effects and special assessments. The newly established policy effect is to assess the job effects, living conditions impact, environmental evaluation, and safety evaluation that contribute to the quality of life. Sixteen policy assessment items were selected and evaluated quantitatively and qualitatively. The results of the study are expected to provide basic data for the comprehensive judgment of the preliminary feasibility study of agricultural infrastructure improvement project in the future.

• The Journal of Society for e-Business Studies
• /
• v.27 no.1
• /
• pp.81-94
• /
• 2022

In the service sectors, the qualitative evaluation method in the form of a survey is widely used as a major assessment tool to evaluate the quality of service. However, the results obtained from a survey can involve the subjective judgment of the respondent. In this study, we propose a method to secure objectivity by excluding subjectivity that may be included in the qualitative evaluation results. In particular, we deal with a situation where the same type of qualitative evaluation tool is used repeatedly by several service providers. To this end, by utilizing both the Ordered Probit model and third-party evaluation results, we determine whether subjectivity is involved in the results. After correcting subjectivity, the final results are obtained through statistical analysis. The application analyzed in this study is the medical service area. With the actual evaluation results supplied by the service providers, we explain how objectivity can be secured from the assessment data by applying our proposed approach.