• Journal of the Korean Professional Engineers Association
• /
• v.27 no.6
• /
• pp.85-93
• /
• 1994

For the continuous development of the manufacturing company, selp-helpㆍdiligence of the individual members of the organization and cooperation system of the sub-department process of the manufacture must operate under rationality. Moreover, perpetual and reasonable improvement on productivity should be focused on. Improvement on productivity implies raising $\ulcorner$output / input$\lrcorner$ ratio, and this does not only implies simple increase of the level of output. Therefore under the theoretical principle, Which is designed to increase the ratio of $\ulcorner$output / input$\lrcorner$ -economically select the relevant $\ulcorner$methodology$\lrcorner$. When rational improvement on productivity $\ulcorner$techniques$\lrcorner$ are properly applied with this methodology, calculated result will come out. The ultimate aim of improving quality does not mean simply reducing the percentage of the defects, but means improving the quality of products, for customer satisfaction. Thus recognize this, we have to contribute to the national economy growth through the enhancement of added value of individual company by $\ulcorner$improvement on quality and productivity, and reduction of the cost$\lrcorner$, $\ulcorner$improvement program on quality and productivity$\lrcorner$ shouldn't be just the parading formality. We can expect the economy result, these are applied to the learning essence and the principle of the improvement.

• Journal of the Korean Professional Engineers Association
• /
• v.33 no.3
• /
• pp.71-79
• /
• 2000

The effects of alkali salts adding on the cooking quality improving in dried noodles were investigated in the good texture maintaining for preventing solid soluble losses ,through chemical analysis and actual manufacturing practice ,the following results were obtained. Experiments were took a special flour of ASW:DNS=70:30, thickening agent(TA) composed of K2CO3 58%, Na2CO3 36% and Na4P2076%, and emulsified oil(EO) mixing of corn oil 44%, polysorbate 23%, emulsifier(ester of glycerin and fatty acids) 21%, soy lecithin 12%. When the mixing ratio of TA and EO to flour, is 0.03 and 1.5%(w/w) or morel than, satisfied the good quality. The water soluble solid matters content of the lowest 3.2% in the treating group that TA and EO is 0.03 and 1.5%(w/w) respectively, comparing to the 7.3% in the control group provides a excellent cooking quality. The research achieves the similar effects at specific gravity, water absorption ratio, weight increasing rate and volume expansion ratio. According to appearance test the more treating of TA turn the noodle into deeper yellow-green color. Turning to the deeper yellow color according to the increasing of EO provides better

• International Journal of Quality Innovation
• /
• v.7 no.2
• /
• pp.141-156
• /
• 2006

This study describes a novel algorithm for optimizing the quality yield of silicon wafer slicing. 12 inch wafer slicing is the most difficult in terms of semiconductor manufacturing yield. As silicon wafer slicing directly impacts production costs, semiconductor manufacturers are especially concerned with increasing and maintaining the yield, as well as identifying why yields decline. The criteria for establishing the proposed algorithm are derived from a literature review and interviews with a group of experts in semiconductor manufacturing. The modified Delphi method is then adopted to analyze those results. The proposed algorithm also incorporates the analytic hierarchy process (AHP) to determine the weights of evaluation. Additionally, the proposed algorithm can select the evaluation outcomes to identify the worst machine of precision. Finally, results of the exponential weighted moving average (EWMA) control chart demonstrate the feasibility of the proposed AHP-based algorithm in effectively selecting the evaluation outcomes and evaluating the precision of the worst performing machines. So, through collect data (the quality and quantity) to judge the result by AHP, it is the key to help the engineer can find out the manufacturing process yield quickly effectively.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1994.06a
• /
• pp.796-801
• /
• 1994

Measuring noise, sound quality or acoustical comfort presents a difficult task for the acoustic engineer. Sound and noise are ultimately jugded by human beings acting as analysers. Regulations for determining noise levels are based on A-weighted SPL measurement performed with only one microphone. This method of measurement is usually specified when determining whether the ear can be physically damaged. Such a simple measurement procedure is not able to determine annoyance of sound events or sound quality in general. For some years investigations with binaural measurement analysis technique have shown new possibilities for the objective determination of sound quality. By using Artificial Head technology /1/, /2/ in conjunction with psychoacoustic evaluation algorithms - and taking into account binaural signal processing of human hearing, considerable progress regarding the analysis of sounds has been made. Because sound events often arise in a complex way, direct conclusions about components subjectively judged to be annoying with regard to their causes and transmission paths, can be drawn in a limited way only. A new procedure, complementing binaural measurement technology combined with mulit-channel measuements of acceleration sensor signals has been developed. This involves correlating signals influencing sound quality, analyzed by means of human hearing, with signals form different acceleration sensors fixed at different positions of the sound source. Now it is possible to recognize the source and the transmission way of those signals which have an influence on the annoyance of sound.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.10a
• /
• pp.647-653
• /
• 2009

Taguchi parameter design is an approach to reducing performance variation of quality characteristic value in products and processes. Taguchi has used SN (Signal to Noise) ratio to achieve the appropriate set of operating conditions where variability around target is low in the Taguchi parameter design. This paper describes the prediction technique of vehicle performance using parameter analysis to reduce man hour and test development period as well as to achieve stable NVH performance. Design engineer could efficiently decide the design variable using parameter analysis database in early design stage. These improvements can reduce the time needed to develop better vehicles.

• Journal of Korean Society for Quality Management
• /
• v.42 no.4
• /
• pp.563-578
• /
• 2014

Purpose: The purpose of this paper is integrated tolerance design process by advantages of engineering design and 6 sigma statistical tolerances design. Methods: Integrated tolerance design process can determine the goals by using engineer's experience and clarify tolerance by 6 Sigma statistical methods. Integrated design process can be applied by using non-linear simulations. Results: We applied integrated design process to the optical disc drive spindle motor and get good result. Conclusion: If this method is applied test method in the early stages of development, then Design can be reduced development time and cost.

• Journal of Korean Society for Quality Management
• /
• v.27 no.2
• /
• pp.218-236
• /
• 1999

The purpose of parameter design is to determine optimal settings of design parameters of a product or a process such that the performance characteristics of a product exhibit small variabilities around their target values. Taguchi made significant contributions in this area. However, his analysis of the problem focused on only one performance characteristic or response, although in product and process design, multiple characteristics are more common. The critical problem in dealing with multiple characteristics is how to compromise the conflict among the selected levels of the design parameters for each individual characteristic. In this paper, Methodology using SN ratio optimized by univariate technique is proposed and a parameter design procedure to achieve the optimal balance among several different response variables is developed. Existing case studies are solved by the proposed method and the results are compared with ones by the sum of SN ratios, the expected weighted loss, the desirability function, and EXTOPSIS model.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1998.10a
• /
• pp.455-462
• /
• 1998

Analysis and design of vibrating machine foundations subjected to dynamic loads is a very complex problem. Thus it is difficult to set up an accurate analytical modeling. Generally, the design of foundations for vibrating machines has been performed by the equivalent static analysis which is generally based on engineer's experience and various assumptions The purpose of this study is to develop an integrated system which enables structural engineers to produce results of high quality within a short time in works related to structural analysis and design of foundation for vibrating machines. As the result of this study, level-up of application software is expected as well as improvement of quality in structural engineering and reduction of engineers' effort.

• Journal of the Korean Professional Engineers Association
• /
• v.35 no.4
• /
• pp.62-67
• /
• 2002

Soondae is one of the traditional food in Korea. In order to develop the quality of Soondae, Mulberry leaf, safflower, DF-100 and Chitosan were added and their effect on the property change of Soondae during storage periods were investigated. There was no significant difference in proximate compositions among samples. TBA value of all sample increased as storage periods and TBA value of Soondae with DF-100 was lowest during storage periods. The content VBN of Soondae with was lowest during the storage periods. Microbiology was inhibited by adding the DF-100 and Chitosan at Soondae. Adding Chitosan of Soondae was highest point ati Sensory test. 18:1 content of lipid acid composition was the highest among samples.

• Journal of the Korean Professional Engineers Association
• /
• v.46 no.1
• /
• pp.58-63
• /
• 2013

Since 2010, politicians and netizens have been frequently talking about "The Standard of a Nation". Specification/Standard contains "de facto standard" and "de jure standard". "The Standard of a Nation", the level of a state's quality, is prescribed by the constitution. Though the constitution, which is equal to a state's official standard, has been well established, it would be undervalued without civil obedience. The state standard can never be improved by a couple of successful projects or some national policies. The time is that the people who would like to level up of the state standard also should consider technology and science as important.