• 대한토목학회논문집
• /
• 제26권1A호
• /
• pp.229-236
• /
• 2006

최근 암석을 깨어 제조한 부순모래의 사용량이 꾸준히 증가되어 전체 잔골재 사용량의 20%에 가깝게 사용되고 있고, 향후에도 부순모래의 사용량은 계속 증가할 것으로 판단된다. 그러나 부순모래 생산 시 품질에 대한 인식 부족 등으로 KS F 2527 기준을 만족하지 않은 부순모래가 콘크리트 제조 시 사용되는 것으로 조사되고 있으나, 이런 부순모래가 콘크리트에 미치는 영향에 대해 체계적으로 검토한 연구가 거의 없는 실정이다. 따라서 본 연구에서는 부순모래의 입형이 콘크리트 품질에 미치는 영향에 대해 분석함으로써 부수모래를 콘크리트에 활용할 수 있는 자료를 제시하고자 한다. 현재 KS F 2527의 기준인 입자모양 판정 실적률 53% 부순모래를 사용한 콘크리트는 시공성, 공기연행성 및 내구성 등에서 문제가 있는 것으로 나타났다. 그리고 부순모래를 사용한 콘크리트의 품질을 향상시키기 위해 특히 고강도 콘크리트에서 입자모양 판정 실적률은 현행 KS 기준인 53%에서 55%으로 조절해야 할 것으로 분석되었다.

• 항공우주기술
• /
• 제11권2호
• /
• pp.19-25
• /
• 2012

정지궤도복합위성은 천리안위성에 비하여 고품질의 영상품질을 요구하며 지구센서 대신 별센서의 사용으로 인하여 고정밀의 탑재용 궤도정보생성이 요구된다. 이는 고정밀의 궤도 결정이 바탕이 되어야 한다. 천리안위성의 경우는 항공우주연구원에 설치된 추적 안테나를 이용하여 레인징을 수행하고 이를 바탕으로 궤도결정을 수행하였다. 정지궤도복합위성의 정밀한 궤도결정을 위하여 항공우주연구원에서는 축섬에 새로운 추적장비를 준비중에 있다. 본 논문에서는 대전과 축섬에 위치한 정지궤도복합위성을 가정하여 궤도결정을 수행했을 경우 궤도결정 및 예측 오차와 테이블 방식의 탑재용궤도정보 생성기의 궤도정밀도를 분석하였다. 본 논문에서는 공분산해석과 수치적인 방법을 통하여 궤도정밀도를 해석하였다. 두 해석결과를 종합하여 최종적인 궤도오차를 산출하였다.

• 항공우주기술
• /
• 제12권2호
• /
• pp.123-130
• /
• 2013

우주파편의 지속적인 증가로 인해 우주파편으로부터 자국의 위성을 보호하기 위한 시스템이 등장하게 되었다. 이에 한국항공우주연구원에서도 자국의 운영위성의 보호를 위해 우주파편에 의한 충돌위험 종합관리시스템을 개발 중에 있다. 이러한 충돌위험 종합관리시스템은 자국의 위성에 대한 충돌위험을 가지고 접근해오는 우주파편에 대한 궤도정보의 정밀도에 의해 성능의 차이를 보일 수 있다. 따라서 이러한 충돌위험 종합관리시스템은 우주파편에 대한 여러 정밀 관측데이터의 처리기능을 가지고 있어야 한다. 본 논문에서는 우주파편에 대해 가장 널리 사용하고 있는 레이더 관측 데이터를 처리하기 위해 비교적 정밀한 궤도결정 정보를 가지고 있는 아리랑 2호 위성에 대한 가상 레이더 관측데이터를 이용하여 정밀 궤도결정을 수행해 봄으로써 개발 중인 충돌위험 종합관리시스템의 성능을 확인하고자 한다.

• 한국식품과학회지
• /
• 제36권4호
• /
• pp.527-530
• /
• 2004

Adulteration of sesame oil using near infrared (NIR) spectroscopy was determined. Vegetable oils including sesame oil were scanned on the NIR spectrophotometer at 400-2500 nm. Partial least square (PLS) was applied on the standardized full NIR spectral data. Discriminant analysis with PLS is adequate for determination of sesame oil adulteration, except with decreasing adulteration rate. Designing of quality control system, which uses NIR spectroscopy to measure adulteration level of sesame oil is thus possible, although more work is required to give acceptable accuracy level.

• Environmental Engineering Research
• /
• 제21권2호
• /
• pp.171-179
• /
• 2016

This study analyzes guidelines to select optimum number of grids to represent behavior of a given water system appropriately. The EFDC model was chosen as a 3-D hydrodynamic and water quality model and salt was chosen as a surrogate variable of pollutant. The model is applied to an artificial canal that receives salt water from coastal area and fresh water from a river from respective gate according to previously developed gate operation rule. Grids are subdivided in vertical and horizontal (longitudinal) directions, respectively until no significant changes are found in salinity concentrations. The optimum grid size was determined by comparing errors in average salt concentrations between a test grid systems against the most complicated grid system. MSE (mean squared error) and MAE (mean absolute error) are used to compare errors. The CFL (Courant-Friedrichs-Lewy) number was used to determine the optimum number of grid systems for the study site though it can be used when explicit numerical method is applied only. This study suggests errors seem acceptable when both MSE and MAE are less than unity approximately.

• 품질경영학회지
• /
• 제22권2호
• /
• pp.41-50
• /
• 1994

Consider a canning process where cans are filled with an expensive ingredient. Cans weighting above the specified limit are sold in a regular market for a fixed price, and underfilled cans are emptied and refilled at the expense of a reprocessing cost. In this paper, the effect of measurement error on the determination of the optimal process mean for a canning process is examined. It is assumed that the quantity X of ingredient in a can is normally distributed with unknown mean and known variance, and the observed value Y of X is also normally distributed with known mean and variance. A profit model is constructed which involves selling price. cost of ingredients, reprocessing cost. and cost from an accepted nonconforming can, and methods of finding the optimal process mean and the cutoff value on Y are presented. It is shown that the optimal process mean increases. and the expected profit decreases when the measurement error is relatively large in comparison to the process variance.

• Journal of the Korean Wood Science and Technology
• /
• 제33권5호통권133호
• /
• pp.29-37
• /
• 2005

A previous study verified that the SIRT (simultaneous iterative reconstruction technique) method is more efficient than the back-projection method as a CT algorithm for wood. However, it was expected that the determination of the initial model function of the SIRT method would influence the quality of CT image. Therefore, in this study, we intended to develop a technique that could be used to determine an adequate initial model function. For this purpose, we proposed several techniques, and for each technique we examined the effects of the initial model function on the average errors and the CT image at each iteration. Through this study, it was shown that the average error was decreased and the image quality was improved using the proposed techniques. This tendency was most pronounced when the back-projection method was used to determine the initial model function. From the results of this study, we drew the following conclusions: 1) The initial model function of the SIRT method should be determined with careful attention, and 2) the back-projection method efficiently determines the initial model function of the SIRT method.

• Journal of Biosystems Engineering
• /
• 제30권4호
• /
• pp.242-248
• /
• 2005

There was no useful milling standard to produce high quality milled rice efficiently and adequately in Rice Processing Complex. Therefore, the whiteness of milled rice produced Rice Processing Complexes were different according to Rice Processing Complexes and milling periods at the same Rice Processing Complex. This research was carried out to contribute the production and distribution of high quality milled rice through determination of whiteness condition of milled rice as a milling stndard based on degree of bran removal using New $May-Gr\ddot{u}wald$ reagent dyeing method and taste of cooked rice. The optimum whiteness value of milled rice for efficient milling in Rice Processing Complex was found to be from 40 to 41, while the degree of milling was from $8.9\%\;to\;9.2\%.$ At this whiteness condition, the first derivative of whiteness value according to degree of milling was higher than the average value from brown rice to well milled rice, and the broken kernel ratio was from $3.0\%\;to\;3.4\%.$ This whiteness condition ($40\~41$) could be considered as a milling condition in Rice Processing Complex.

• 생약학회지
• /
• 제31권3호
• /
• pp.340-344
• /
• 2000

Lonicerae Flos, the flower of Lonicera japonica Thunb., has been used as a diuretic, stomachic, antipyretic, analgesic and anti-inflammatory agent in Korea. In order to evaluate the quality of Lonicerae Flos, the method of isolation and quantitative determination of luteolin $7-O-{\beta}-D-glucoside$ as a reference standard compound has been developed. Different specimens of Lonicerae Flos were collected from twenty Korean markets and were analyzed with HPLC using the mobile phase of MeOH-4.5% acetic acid solution (16.5:83.5). The average content of luteolin $7-O-{\beta}-D-glucoside$ from Lonicerae Flos in Korean markets was $0.43{\pm}0.34%$.

• 생약학회지
• /
• 제31권3호
• /
• pp.335-339
• /
• 2000

Polygoni Multiflori Radix, the root of Polygonum multiflorum Thunb., has been used as a tonic, and in the inflammation and constipation in Korea. In order to evaluate the quality of Polygoni Multiflori Radix, the method of isolation and quantitative determination of emodin as a reference standard compound has been developed. Different specimens of Polygoni Multiflori Radix were collected from twenty Korean markets and were analyzed with HPLC using the mobile phase of MeOH-water (64:36). The average content of emodin from Polygoni Multiflori Radix in Korean markets was 0.021%.