• Journal of the Korean Recycled Construction Resources Institute
• /
• v.3 no.3
• /
• pp.252-260
• /
• 2015

The aim of this research is providing the fundamental data for treating and recycling the byproducts by using the wet processed bottom ash as a fine aggregate replacement for cement-based extruded panel. Although the cement-based extruded panel was used mainly as a cladding component with its high strength and outstanding durability, it was hardly spread because of low economic feasibility due to the high cost of additives or fibers which were used to achieve 14 MPa of flexural strength as a cladding material. As a solution of this drawback, by the previous research, it was possible to replace cement by fly ash up to 80 % by decreasing quality criteria with restricting the application to indoor purpose. In this research, based on the previous research, by using the bottom ash as a replacement of fly ash, improvement of shape retention performance is tried. As a result of the experiment on evaluating the optimum content and PSD of bottom ash, as the fineness modulus and content of bottom ash was increased, the extruding performance was decreased and penetration resistance was increased. Additionally, the optimum content and the maximum particle size was found as 20 %, and 0.3 mm, respectively.

• Journal of Korean Society of Forest Science
• /
• v.32 no.1
• /
• pp.9-15
• /
• 1976

Financial rotations of Pinus koraiensis stands are calculated and compared on the basis of five basic financial maturity concepts. The rotations given by the forest rent and average annual gross revenue models are in excess of sixty years by adopting zero interest rates of capital and forest lands. IRR model also neglects land value and highly sensitive to the changes of fixed and regeneration costs. The Faustmann doctrine recommands rotation ages of 23-39 years depend upon applied interest rates and site indices, and seems to be most adequate for determining financial maturity. It is however the situation in Korea that economic conditions are changing rapidly, and thus a model which does not require many exogenous variables in calculation process is preferable. The Duerr's solution has a basic simplicity and logic which is appealing from both a theoritical and practical viewpoint, and most adaptable to the Korean situation, even though the model completly neglects the opportunity cost for forest land. There is a tendency to reduce rotation length with the increase of site quality, but the difference is negligible.

• Resources Recycling
• /
• v.18 no.3
• /
• pp.55-61
• /
• 2009

Dewatering process to remove water from pigment sludge was important in the diverse aspects of the improvement of product quality, curtailment of the drying cost and the transportation. It was difficult to dewater pigment particles with the mechanical forces because the size was fine under $5{\mu}m$. Thermal filter press dewatering equipment composed of squeezing plate and a fixed heating plate was developed to improve the dewaterability of pigment the sludge as supplying the heat from the fixed heating plate to the cake. Several tests that estimate the dewaterability for pigment sludge as with or without squeezing process and the difference of dewatering time was conducted with this equipment. Dewaterability of thermal dewatering under squeezing process was increased about 20% compared with non squeezing process. Under squeezing process, thermal dewatering tests changing dewatering time with 70 and 80 minute were conducted respectively. The water content of cake was more reduced at dewatering time of 80 minute compared with 70 minute, and dewatering velocity was also decreased, which caused the productivity of thermal filter press to drop. It was observed that clogging of filter cloth didn't almost occur because the liquid was discharged from cake layer easily. In this research, it was resulted that the squeezing process and long dewatering time were effective to improve the dewaterability of pigment sludge. So, this thermal filter press equipment was useful for dewatering the fine particle sludge like pigment.

• The KIPS Transactions:PartD
• /
• v.15D no.6
• /
• pp.793-802
• /
• 2008

The development methods which utilize OSSs have been tried as new alternative to solve limits of the previous software developments such as the quality of software, and time and cost of developments. Especially, small and medium companies are suffering from difficulty in applying large-scale development methodology whenever they develop softwares. Therefore, in the current situation that demand for small-scale development methodology is increasing, the methods of utilizing OSSs can become an efficient way to save costs and reduce a development period. Accordingly, analysis of open-source is no fixed procedure or method to utilize open-source for software developments in the field. In this thesis, to solve such problems, we propose the procedures and methods for identifying and selecting suitable open-source, and effective methods for improvement and integration through least modification on the basis of synthesis of existing researches and experiences in development projects. For selection of OSSs, we did identify correct requirements for the software to be developed, investigate the open-source just matching with such requirements, draw a candidate index, establish assessment criteria, and the consequently present a method to select OSSs. And, we deduced the validity and improvement of each detailed activity from practical application to an actual project and assessment.

• Korean Journal of Construction Engineering and Management
• /
• v.18 no.1
• /
• pp.58-64
• /
• 2017

Construction Management (CM) is being utilized as an efficient project management system. Construction management system provide scientific management techniques as well as the expert's service with the expertise. Accordingly, CM services demand is continuously increasing in construction project. Construction Management engineer grade is distinguished by the Index of Construction Engineer's Competency (ICEC). Construction management engineer requires a higher score than the other fields. However, junior grade CM engineer can get grade according to the education and qualification. This study was conducted junior grade CM engineer depth interview after analyzing the problem of the current CM engineer grade system. As a result, this study was to extracted the 23 kind competence factors. And, competence factors were five area grouped using affinity diagram method. Next, we analyzed the importance utilizing the Analytic Network Process (ANP) technique. As a result, high priority areas were analyzed to be quality and cost areas associated with project management.

• Korean Journal of Construction Engineering and Management
• /
• v.19 no.1
• /
• pp.43-53
• /
• 2018

Modular construction can improve construction quality and accuracy through manufacturing process, and it allow massive production and cost savings by repeatedly producing the same unit. In particular, it is possible to reduce the time because the on-site work and the manufacturing process can be carried out at simultaneously. However, according to the modular construction project survey report, there is no significant difference regarding the average construction period between modular construction and conventional construction. This is due to schedule delay problems that occur during construction phase. Therefore, it is necessary to select alternatives to prevent schedule delay during on-site construction progressing. Especially, in case of large-scale modular construction project, on-site module assembly and manufacturing process are performed concurrently. Hence, identification of alternatives should be done at the co-occurrence by taking both manufacturing and on-site work process in to account. In this research, the management factors of large-scale modular construction project were identified through the IDEF0 modeling, and the quantity management model for manufacturing and assembly is developed. This will reduce the schedule delay problem that occurs in the progression on-site work of a large scale modular construction.

• Journal of Digital Convergence
• /
• v.12 no.3
• /
• pp.299-308
• /
• 2014

Nowadays, dental tourism becomes phenomenon because of its cost-effectiveness, improvement of quality and technology, dental infrastructure, and attractive tourism. Korea as one of popular destination country had established dental system. On the other hand, Indonesia with high number of population is potential market for dental tourism. The aim of this study is to compare the knowledge, attitude, and experience towards dental tourism among Indonesian and Korean. Two cross-sectional descriptive surveys were conducted to collect the data. This study was used one questionnaire in two different languages due to nature of the study population. Data from a total 923 of Indonesian from 33 provinces in Indonesia was collected during the period from April through July 2010. On the other hand, during May until August 2010 data from a total of 312 Korean were obtained. It was found that the majority of participants in both countries had never heard about dental tourism. Among those who had heard about dental tourism, the most common source was internet. Ownership of dental insurance had significant relationship with knowledge of dental tourism among Indonesian while level of education and monthly internet usage had it among Korean (p<0.05). Attitudes of Indonesian and Korean people about dental tourism were negative due to assumption that dental services in their home country were satisfactory. 100% of Korean had no experience on dental treatment in other countries while 2.4% of Indonesian had experience with it. In conclusion, regarding all these evidences, comprehensive and positive information about dental tourism is needed to enhance people's knowledge, attitude, and experience.

• Journal of the Korean Society for Railway
• /
• v.14 no.4
• /
• pp.313-319
• /
• 2011

In a modern society, various type of transportation modes are utilized, among them the subway system is the one of the main transportation mode which more than 7.21 million people ride a day in Seoul. Due to the increased interests on the indoor air quality (IAQ) of underground facilities, public concerns on IAQ of subway system are increasing also. Platform screen door (PSD) recently installed at the whole stations of Seoul subway and tunnel washing-out appeared to be effective in reducing particulate matters in the platform and tunnel. However there has not been any attempt to improve IAQ of subway cabin inside. Most technologies for removing airborne particulate matters are known to be difficult to adopt on the subway cabin due to the problem of maintenance cost. Therefore, the object of this study is a practical development of cabin air cleaning system which can reduce the concentration of airborne particles and harmful gases at the same time. In this paper, we focused on the development of particle removing system utilizing a roll-filter for increasing operating time of air filter. The prototype of system was designed and manufactured based on the numerical prediction results. For rollfilter device, 5 candidate filter materials were tested in point of particle collection efficiency and pressure drop. It was found that the electrically charged filter material showed the highest performance among them.

• Journal of Korean Academy of Nursing
• /
• v.25 no.3
• /
• pp.472-484
• /
• 1995

The purpose of this study was to develop a home health care model in the public health system and to test the effectiveness of the model. Seven com-munity health practitioners in Yon- Cheon county. Kyunggi province, carried out home health care service for this research. The subjects of the home health care were a total of 111 community residents with chronic health problems and risk-prone infants and children; 29 persons with hypertension, 18 persons with diabetes, 12 persons with neurologic problems, 12 elderly, and 40 infants and children. During the period of study, from December, 1993 to March, 1995, a demonstrative home health care model was developed in the Yon-Cheon County community health centers with the cooperation of the Yon-Cheon Medical Center and Yon-Cheon Public Health Center for the first six months. A home care practice manual and recording system for home visits were also co-developed by the researchers and community health practitioners. Four workshops and monthly conferences were held for this purpose. Actual home care practice took place for two months, and on-going evaluation and replanning accompanied this process. The result of the evaluation of home care service were as follows. 1) For persons with hypertension, diabetes, neurologic problems, there was significant improvement in knowledge of disease and care, but no significant difference was seen in health behavior or symptoms after home care service. 2) No significant difference was seen in level of self esteem or depression after reminiscence therapy among 12 elderly subjects. 3) There were significant differences in satis-faction toward child rearing and parental sup-port, but no significant difference In education needs for parental role after home care service among parents of infants and children. 4) There was significant improvement in the quality of life among the subjects after the home care service. 5) Subjects responded that they were highly satisfied with the home care service given by the community health practitioners. Although, the actual implementation period was very short, and not all of the evaluation outcomes showed significant improvement, the home health care model of community health practitioners was, in general, positively evaluated. Through this re-search, the possibility of community health practitioners working as active home care personnel in the public health care system is supported. Further research with an expanded area and subjects for a longer period is recommended. Cost effectiveness research is also needed.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.32 no.4
• /
• pp.334-347
• /
• 2006

The aim of this study is to evaluate the reasonableness of the medical fee on oral and maxillofacial surgery field according to surgeon's opinions and actual conditions. The medical fee has significant influence on hospital income, the supply and distribution of medical manpower, quality and facilities of medical services. Questionnaire survey was sent to 86 oral and maxillofacial surgeons who worked more than 3 years in general hospital. Among them, 25 doctors replied the 109 answers survey and the average of treatment time and physician work relative value on each category was calculated. And the health insurance cost (that has been applied since 2003) was compared with the questionnaire results. And finally we investigated items that health insurance system did not include in oral and maxillofacial field but actually performed in oral and maxillofacial surgery clinic. The result was that the medical fee did not properly reflect physician work relative value of actual treatments. In case of complicated extraction, work relative value needed 3.5 times enhancement of present value. For simple impacted tooth extraction 1.8 times, for impacted tooth extraction including odontomy 1.7 times, and for fully impacted tooth more than 2/3 of it located into the alveolar bone, 1.8 times enhancement needed. In respect of the present physician work relative value, hemimandibulectomy with neck lymph node dissection for the malignancy is appropriated as 3.3 times of open reduction and internal fixation for the mandibular fracture, but the questionnaire result showed 25 times discrepancy. In conclusion, this research shows the need for intervention that health insurance included items and legal relative medical value must act in union with treatment in clinic to reduce the imbalance between them.