• Journal of the Korea Society of Computer and Information
• /
• v.3 no.4
• /
• pp.174-192
• /
• 1998

These day in the Quality Assurance System, it required that computer system is able to utilize SQC and ISO 9000 series, just then. However. because SQC is necessary to special branch of statistical experience, it is very hard to use and have a bound in that apply to practical business. Therefor in this paper, we proposed the software system which is control, at the same time, SQC and ISO 9000 series, in addition to avail without statistical knowledge. For the shake of this point, the substance of this study is largely separated dual part that ISO 9000 system for which is limited to use design of basic system, test, experiment, tracking incongruent part, analysis condemned goofs, and SQC system for which is to limited to use control chart, estimate, statistical testing, design of experiment(DOE) which used to commonly in Quality Control System. Expected efficiency of this paper is to set Qualify Management System, transfer qualify consciousness, satisfy the customer, increase reliability, in particular, it is expected that it is very useful to minor enterprises of manufacturing-centered.

• Journal of Korean Academy of Nursing
• /
• v.37 no.5
• /
• pp.744-753
• /
• 2007

Purpose: The effects of telephone intervention on self-care practices and quality of life for gynecological cancer patients under chemotherapy was investigated. Methods: A non-equivalent control group pre-test post-test quasi-experimental design was used. The subjects were women cancer patients who had received less than two chemotherapy sessions at C university hospital of Chonnam province(26 in the experimental group: 25 in the control group). The patient's self-care practices(Na & Lee, 1999; Jang, 2004) and quality of life(Lee & Jo, 1997) were measured three times. using a questionnaire. The data was analyzed by Repeated Measures ANOVA, the Friedman test, and the Mann-Whitney test using the SPSS window version 12.0 program. Results: This study showed that the score of self-care practices and quality of life for the experimental group under telephone counseling were higher than those of the control group. Conclusion: This study revealed that a telephone intervention as supportive nursing care for women cancer patients under going chemotherapy was effective for self-care practices and qualify of life during the recovery period. Futhermore, this study also suggests that telephone counseling can serve as a continuing nursing supportive intervention for women cancer patients for the upcoming stages of further chemotherapy.

• Journal of radiological science and technology
• /
• v.21 no.2
• /
• pp.57-63
• /
• 1998

AEC was designed to assist in the production of radiographs of equal density and to aid in the production f consistently high quality radiographs. Many improvements have been made in the AEC and these have helped to increase it's acceptance. Newer system (Falling load) control kVp and mA as well as exposure time. Authors have had experiments about the characteristics of AEC by Zone System. Zone System is the method to detection of photographic image qualify by control the photo print from Fred Archer and Ansel Adams. With the Zone System theory the experiments of density control, characteristics of phantom thickness and reproducibility of occupation rate of contrast media could make quality control of X-ray photography effectively in falling load system.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.2 s.233
• /
• pp.333-340
• /
• 2005

Feedrate is one of the factors that have the significant effects on the productivity, qualify and tool life in the cutting mechanism as well as cutting velocity, depth of cut and width of cut. In this study, in order to realize the high-efficient machining, a new feedrate optimization method is proposed based on the concept that the optimum feedrate can be derived from the allowable cutting power since the cutting power can be predicted from the cutting parameters as feedrate, depth of cut, width of cut, chip thickness, engagement angle, rake angle, specific cutting force and so on. Tool paths are extracted from the original NC program via the reverse post-processing process and converted into the infinitesimal tool paths via the interpolation process. And the novel NC program is reconstructed by optimizing the feedrate of infinitesimal tool paths. Especially, the fast feedrate optimization is realized by using the Boolean operation based on the Goldfeather CSG rendering algorithm, and the simulation results reveal the availability of the proposed optimization method dramatically reducing the cutting time and/or the optimization time. As a result, the proposed optimization method will go far toward improving the productivity and qualify.

• Proceedings of the Society of Korea Industrial and System Engineering Conference
• /
• 2002.05a
• /
• pp.1-8
• /
• 2002

At present, company has to produce a product that consumer like with a competitive price, a good quality, and a fitting time to supply. Process control and qualify control are very important to supply with a product uniformly and inexpensively In this paper, the characteristic of product quality is monitored by control chart during the machining process and construction of quality control cycle is considered to divide into two types in this case that different assignable causes lead to shifts having different magnitudes. Then we are intended to find a process shift magnitude which has economical quality cost policy and are considered to quality cost functions to find a process shift magnitude. Those costs are categorized into the well-known categories of prevention, appraisal, and internal failure and external failure. This paper ends with numerical examples that demonstrate the usefulness of the model.

• Proceedings of the Safety Management and Science Conference
• /
• 2003.05a
• /
• pp.195-201
• /
• 2003

This study investigated the management environment of medium and small business by examining the role of medium and small business in national economics, the change in management condition, and the problems in Qualify and technique. Also we analyzed problems in the past quality control activity of our medium and small business, and examined the driving direction and introduction method of QM. And to understand the effect of manager's concern in quality management to observe the quality system before and after introduction of QM. A target for this investigation is the medium and small business which has introduced QM through ISO 9000.

• 제어로봇시스템학회:학술대회논문집
• /
• 1999.10a
• /
• pp.57-60
• /
• 1999

An optimal control technique designed for simultaneous tracking and quality control for batch processes. The proposed technique is designed by transforming quadratic-criterion based iterative learning control(Q-ILC) into linear quadratic control problem. For real-time quality inferential control, the quality is modeled by linear combination of control input around target qualify and then the relationship between quality and control input can be transformed into time-varying linear state space model. With this state space model, the real-time quality inferential control can be incorporated to LQ control Problem. As a consequence, both the quality variable as well as other controlled variables can progressively reduce their control error as the batch number increases while rejecting real-time disturbances, and finally reach the best achievable states dictated by a quadratic criterion even in case that there is significant model error Also the computational burden is much reduced since the most computation is calculated in off-line. The Proposed control technique is applied to a semi-batch reactor model where series-parallelreactions take place.

• Journal of the East Asian Society of Dietary Life
• /
• v.10 no.3
• /
• pp.229-238
• /
• 2000

This study was conducted to investigate the effect of homogenized kimchi product (HKP) on dough characteristics and quality of bread. Fermented homogenized Chinese cabbage kimchi product was added 0.10, 20 and 30% to wheat flour. The pH of dough decreased with an increase in the amounts of HKP, which showed at PH 4.9 for the dough added 30% HKP. Fermentation time of the dough was reduced as much as 9~23 minutes as compared with the control products. Loaf volume index of the bread prepared by adding 10 ~30% HKP increased also by 12.7 ~ 19.0%. Hardness, cohesiveness, springiness and gumminess of the bread added with 30% HKP were lower than those of the control. The gas forming cell of the bread added with 30% HKP were good and regular. Crust and internal color of the bread with more HKP had tendency to redness. Sensory quality of the kimchi-bread estimated by shape, flavor and overall quality was better than that of control product, especially the kimchi-bread qualify at addition of 30% HKP was best.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.03a
• /
• pp.127-132
• /
• 2002

While the pavement design is based on mechanical property such dynamic elastic modulus, the quality of highway subgrade during construction is controled by the optimum moisture content(OMC) and maximum dry density(${\gamma}$$\_$dmax/). However, since the quality control based on the OMC and maximum dry density does not consider the mechanical characteristics, there is a conceptional gap between design and PMS(pavement management system). Therefore, it is necessary to develope a new qualify control system using mechanical property for highway construction in more rational way. To achieve this goal, it is planned to perform various laboratory tests to collect mechanical properties of subgrade soil samples from several highway construction sites and to propose the relationship between dry unit weight (or OMC) and mechanical parameters. In this paper, the experimental data so far obtained are presented and analyzed. In addition, further research plan is presented and discussed.

• The Journal of Korean Society for Radiation Therapy
• /
• v.14 no.1
• /
• pp.155-164
• /
• 2002

This descriptive correlation study was undertaken in order to investigate the relationship of family support and personality with quality of life in patients receiving radiotherapy for breast cancer and to provide basic data to help them improve a better quality of life. This subjects for this study were 74 out-patients undergoing a radiation therapy at C hospital in Kwang-Ju. The data were obtained using a convenience sampling technique. The tool of this study were Ro's qualify of life scale, Kang's family support scale and Wallston & others health locus of control scale. The data were analyzed using a SAS program for percentage, mean, standard deviation, Pearson Correlation Coefficient, GLM. The results were as fellows: 1. The total average score of the quality of life of the subjects was 137.22 (minimum score 38-maximum score 227), item mean score(range 1-5) was 3.15. The total average score of the family support of the subjects was 40.38(minimum score 21-maximum score 47), item mean score(range 1-5) was 3.69. The total average score of health locus of control of the subjects was 42.47(minimum score 28-maximum score 59), item mean score(range 1-6 was 3.69. 2. The results of the analysis of the relationship between the quality of life scores and the health locus of control were as follows : the total average score of the qualify of life of internal locus of control scale was 133.50, he total average score of the quality of life of external locus of control scale was 138.41. 3. There was positive correlation between the health locus of control and the quality of life(r=0.0722, p=0.5413). 4. There were significant positive correlation between family support and quality of life(r=0.2328, p=0.0399). The results of the analysis of the relationship between the each factor in the quality of life scores and family support were as fellows : There were significant difference between the self esteem factor(r=0.2974, p=0.0124), relationship with family factor(r=0.2657, p=0.0241)