• 해양환경안전학회지
• /
• 제23권4호
• /
• pp.376-384
• /
• 2017

선박급유업은 국제물류흐름의 허브인 항만의 부가가치 창출을 위한 핵심적인 사업 중의 하나이다. 선박급유업의 법 제도적인 개선을 통하여 급유산업의 안정화를 도모하여 항만이 실질적으로 부가가치를 창출하는 기능을 수행할 수 있도록 해야 한다. 이 논문에서는 항만운송법과 해운법의 개정, 안전관리체계의 일원화, 선박유 품질관리를 위한 지침제정, 선박급유업자의 불법행위에 대한 관리 및 법 개정에 대한 대책을 제시하고 한다. 결론적으로 선박급유업의 경영 안정화 및 중장기 발전을 위하여 정부, 정유사, 급유선 선주 등이 주체별로 역할을 분담하여 할 것이며, 선진화를 위해서 단계적으로 계약체계 및 법 제도의 개선을 추진해야 할 것이다.

• 산업경영시스템학회지
• /
• 제42권4호
• /
• pp.49-60
• /
• 2019

Recently the concentration of fine dust and ultra fine dust becomes so bad, which seriously threatens the health and even the life of people. So, government started to investigate several ways to reduce the amount of fine dust and ultra fine dust. From a few years ago it has been known that ships anchored at port emit a lot of pollution and seriously affect air quality of neighboring cities. To reduce the pollution emitted by ship AMP (Alternative Maritime Power Supply) has been proposed, which uses the electricity instead of bunker C oil or diesel. Many developed countries already installed AMP to improve air quality in port area. Korea is in the stage of planning to install AMP at port. However, there are many complicated problems to be handled before AMP installation. Due to huge initial cost and long period of construction ship owner and habour operating company are reluctant to AMP installation. And there are serious technological difficulties in constructing AMP in existing harbour. Lack of AMP core technology and operational difficulties of AMP are also big challenges to be conquered. In this study SWOT/AHP method is used to find strategic and efficient ways to handle above complicated challenges and then to vitalize the AMP installation.

• 해양환경안전학회지
• /
• 제19권6호
• /
• pp.658-665
• /
• 2013

본 연구에서는 국제해사기구(IMO)의 뜨거운 관심분야로 부상되고 있는 선박기인 입자상물질(PM)과 오염물질 배출에 관하여 한국해양대학교 실습선 한바다호를 이용하여 계측하였다. 특히, PM은 TEM 그리드를 이용해 채취하고 전자현미경으로 구조를 파악하였으며, NOx, $CO_2$, CO 등의 배기가스는 연소가스분석기(PG-250A, HORIBA)를 이용해 측정하였다. 본 연구의 결과는 다음과 같다. 1) 선박이 항구에서 출항할 때, Bunker Change로 인한 PM 배출량은 최대 30 % 정도 차이가 있었다. 2) 정속 운항을 하면서 Bunker-A에서 L.R.F.O(3 %)로 변경할 때 측정한 PM 배출량은 $1.34mg/m^3$, L.R.F.O(3 %)로 고정해 측정한 PM 배출량은 $1.19mg/m^3$, L.R.F.O(3 %)만 사용하며 주기관 회전수를 20 % 증가시키면서 계측한 PM 배출량은 $1.40mg/m^3$ 이었다. 또한, 저질유(L.R.F.O(3 %))로 변경시 CO 농도는 약 16 % 증가하는데 비해 RPM을 20 % 상승시킨 경우에는 152 % 이상 급격한 증가를 보였다. 이러한 결과로부터 배기가스 배출의 증가는 연료유종의 영향도 있으나, RPM의 변화에 민감하다는 것을 알 수 있었다. 3) TEM 그리드로 채취한 PM은 약 $4{\sim}10{\mu}m$ 정도의 다양한 입경을 가지는 다공질 응집체 형상의 구조인 것으로 확인하였다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제33권7호
• /
• pp.1103-1112
• /
• 2020

Objective: To measure whether a microbial additive could effectively improve the fermentation quality of delayed-sealing (DS) silage, we studied the effects of inoculants of lactic acid bacteria (LAB) and cellulase enzyme on microbial populations, ensiling characteristics, and spoilage loss of DS silage of Napier grass in Africa. Methods: Quick-sealing (QS) and DS silages were prepared with and without LAB (Lactobacillus plantarum) inoculant, cellulase enzymes, and their combination. The QS material was directly chopped and packed into a bunker silo. The DS material was packed into the silo with a delay of 24 h from harvest. Results: In the QS silage, LAB was dominant in the microbial population and produced large amounts of lactic acid. When the silage was treated with LAB and cellulase, the fermentation quality was improved. In the DS silage, aerobic bacteria and yeasts were the dominant microbes and all the silages were of poor quality. The yeast and mold counts in the DS silage were high, and they increased rapidly during aerobic exposure. As a result, the DS silages spoiled faster than the QS silages upon aerobic exposure. Conclusion: DS results in poor silage fermentation and aerobic deterioration. The microbial additive improved QS silage fermentation but was not effective for DS silage.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권2호
• /
• pp.195-200
• /
• 2015

It is envisaged that the effect of increasingly stricter air emissions legislation implemented through IMO Annex VI and other local air quality controls, together with favorable financial conditions for the use of natural gas instead of liquid fuel oil as a bunker fuel, will see an increasing number of DF engine and single gas fuel engine applications to LNG carriers and other vessel types. As part of provision for the current international movements in the shipping industry to reduce GHG emission in air, new design concepts using natural gas as an alternative fuel source for propulsion of large commercial vessels, have been developed by shipyards and research institutes. In this study, an explosion analysis for a gas supply machinery room of LNG-fuelled container ship is presented. The gas fuel concept is employed for the high pressure ME-GI where a leakage in the natural gas double supply pipe to the engines is the subject of the present analysis. The consequences of a leak are simulated with computational fluid dynamics (CFD) tools to predict typical leak scenarios, gas cloud sizes and possible explosion pressures. In addition, capacity of the structure which is subject to explosion loads has been assessed.

• 한국농공학회지
• /
• 제24권1호
• /
• pp.31-43
• /
• 1982

Engineering phase of dairy housing systems has close connection with the milk produc- tivity of dairy cattle, the quality of milk, extension of dairy production systems, labor- saving in management of dairy cattle and the like. Moreover, the rate of investment of dairy housing facilities is of relatively high level, However, there has been almost no research effort for the improvement of engineering aspects of dairy housing systems in Korea. The purpose of this study is to find out general engineering problems and to recomm- end the improvement in dairy housing systems in Korea. Field survey by means of questionaire, direct measurements, taking pictures and sketching was conducted to get necessary information for the study. Kyung-ki Do region was firstly chosen for sampling area since it has included more than half of the number of dairy farms of the whole country. The results obtained are summarized as follows: 1. In overall dairy farm layout, the dwellings of workers were ignored in the light of sanitary environment 2. The layout of stalls in a dairy barn belongs mostly to the type of double-row face-out, which is compatible with the emphasis of manure disposal activities. 3. While the width and length of stalls were sufficiently close to the standard dimension, the width of mangers was much less than the standard dimension. 4. The width and depth of manure gutters and the width of working alleys were much. less than the standard dimension. 5. The mooring equipment was mostly in the classes of chain or rope. The watering equipment was not facilitated independantly except the one cese of using watercup. 6. The bucket milkers with one or two bucket milkers with the capacity of two cattles. each were used as milking equipment in most dairy farms. 7. There were only few milk rooms independently spaced from other space, in which the arrangement of milking equipment was much less than the standard condition. 8. The lounging ground area was averaged to be sufficient for the activity of dairy herd. 9. Silos for silage used during winter consisted of mostly bunker silos, trench silos and underground vertical silos. Ordinary vertical silos were considered for the farmers to be inconvenient for the labor saving. 10. From the view point of heat conservation and moisture removal within the dairy barns, windows were not flexible for the easy ventilation and ceiling part was not adequate for temperatur maintenance. 11. Waste treatment and disposal systems were not provided with most dairy farms, therefore the livestock waste pollution problems would be serious in the near future.

• Journal of the korean society of oceanography
• /
• 제33권4호
• /
• pp.168-177
• /
• 1998

Five and a half months after the Keumdong oil spill accident on the 21$^{st}$ of September 1993, 34 seawater samples and 94 sediment samples were collected from Kwangyang Bay and Namhaedo area to assess its environmental impacts. Hydrocarbon concentration in the seawater ranged from 0.8 to 9.2 ${\mu}$g/1 with an average of 3.3 ${\mu}$g/1. This average value was nearly the same as the value(3.7 ${\mu}$g/1) before the oil spill accident. This suggests that by the early March of 1994 majority of the coastal water in the study area restored to its background hydrocarbon concentration before the oil spill accident. Nutrients, heavy metals and other general environmental parameters of the seawater did not show any aggravated seawater quality compared with the previous records. From the regression analysis of time-course observation of hydrocarbon in the seawater, except the sediment environment, the effect of oil spill on the water column was estimated to last at least 4 months in the study area after the oil spill accident. In the shoreline sediments, oil deposits were, however, still found at the high water marks at several stations, and very high values were found in the west of Namhaedo, ranging from 3.7 to 40.1 mg/g of wet sediment. Gas chromatography of these samples showed a very distinct Bunker C chromatogram identical to the Keumdong oil spill. Hydrocarbons in the subtidal bottom sediments in the study area and the reference stations (YB and CB) ranged from 0.45 to 18.08 ${\mu}$g/g of wet sediment with an average of 3.09 ${\mu}$g/g. West of Namhaedo (Stations Bl2-B33) generally showed much higher values than inner Kwangyang Bay and in Chinju Bay. Chinju Bay generally showed the lowest value among the study area. Subtidal bottom sediments in inner Kwangyang Bay and Chinju Bay seemed to be less affected than west of Namhaedo. Heavy metal concentrations in the sediment were relatively higher in the Kwangyang Bay than in the Chinju Bay. However, metal concentrations in the study area were in general comparable to the reference areas.