• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.317-320
• /
• 1999

In this study, the piezoelectric ceramics PZT powder was synthesized by Wet-Dry combination method. And the flexible 1-3-0 type composites were fabricated with piezoceramic PZT and Eccogel polymer matrix embedded 3rd phase. Dielectric constant of 1-3-0 type composites was lower than that of single phase PZT ceramics. Thickness mode coupling factor k/sub t/ which was comparable with single phase PZT ceramics and mechanical quality factor Qm were about 0.65 and 6, respectively. These composites are considered as a good candidates for broad-band type transducer applications. The acoustic impedance of 1-3-0 type composites was lower than that of single phase PZT ceramics. Therefore, these composites would be better used for hydrophone applications.

• Proceedings of the KIEE Conference
• /
• 2006.10a
• /
• pp.61-62
• /
• 2006

In this study, in order to develop the low temperature sintering ceramics for multilayer piezoelectric actuator, PMN-PNN-PZT ceramics using ${Fe_2}{O_3}$ and $WO_3$ as sintering aids were manufactured with the amount of $WO_3$ addition, and the specimens were sintered at 900, 930, $960^{\circ}C$, respectively. Thereafter, their dielectric and piezoelectric properties were investigated. The sintering aids were proved to lower the sintering temperature of piezoelectric ceramics due to the effects of ${Fe_2}{O_3}$ and $WO_3$ liquid phase. At 0.3wt% $WO_3$ added specimen sintered at $930^{\circ}C$, kp, Qm, dielectric constant and $d_{33}$ showed the optimum values of 0.60, 1402, 1440 and 360[pC/N], respectively, for multilayer piezoelectric actuator application.

• Journal of Korea Society of Industrial Information Systems
• /
• v.7 no.1
• /
• pp.1-9
• /
• 2002

Though Quality Management(QM) is key determinant for corporate success as shown in Jappanese cases, however, its performance wasn't translated into the context of profitability, which is a good managerial means. Meanwhile the quality cost theory is a different attempt to measure the quality management performance with a financial scale, which doesnot have a reasonable measure. This study suggests a new approach to measure the performance of quality management using ABC(Activity-based Costing), and explains its usefulness with a case study.

• Electrical & Electronic Materials
• /
• v.5 no.2
• /
• pp.207-215
• /
• 1992

본 연구에서 xPb(A $l_{0.5}$N $b_{0.5}$) $O_{3}$-(1-x)Pb(Z $r_{0.52}$ $Ti_{o.48}$) $O_{3}$계의 조성변화에 따른 유전 및 압전특성에 관해 실험한 결과 다음과 같은 결론을 얻었다. PAN의 첨가량이 증가함에 따라 c축은 수축되고 a축은 팽창하여 tetragonality는 감소하였고 grain의 크기와 Curie온도 또한 PAN의 첨가량에 따라 감소하였으나 밀도와 유전상수는 PAN의 양이 5mol%까지 증가하다가 그 이상에서는 감소하는 경향을 보였다. PAN의 첨가량이 증가함에 따라 시편의 비저항은 증가하였고 Kp는 PAN의 양이 5mol%첨가시 60%로 최대치를 보였으나 Qm은 최소치를 나타내었다.다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.438-441
• /
• 2001

In this study, microstructure and piezoelectric characteristics of PNW-PMN-PZT ceramics manufactured using attrition milling method were investigated. Sintering temperature of the ceramics was varied from 1180$^{\circ}C$ to 1240$^{\circ}C$ .With increasing sintering temperature, dielectric constant was increased. In the specimen sintered at 1120$^{\circ}C$, electromechemical coupling factor(Kp) and density showed the maxinum values of 0.546 and 7.78(g/$\textrm{cm}^2$), respectively In the specimen sintered at 1160$^{\circ}C$, mechanical quality factor(Qm) also showed the maximum value of 1,943.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.251-254
• /
• 2000

This paper was to measure the structure, electric characteristics of 0.05Pb($(Al_{0.5}Nb_{0.5})$) - 0.95Pb$(Zr_{0.52}Ti_{0.48})O_3$ ceramics dopped with Cr+Fe. The results of this paper were gotten such as follows; The dielectric constants were decreased with Cr+Fe. The dielectric loss was minimum value of 1.008[%], dopped with Cr+Fe O.9[wt%] at 1200[$^{\circ}C$], In case of sintering at 1150[$^{\circ}C$], electromechanical factodkp) was maximum value of kp 42.73[%], at Cr+Fe 0.9[wt%]. The mechanical quality factor(Qm) was maximum value at Cr+Fe 1.2 [wt%], Also, in case of dopped with Cr+Fe, it make a improvement in temperature coefficient of resonant frequency at 0.3[wt%], 1150[$^{\circ}C$].

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1400-1401
• /
• 2006

In this study, in order to develop low temperature sintering piezoelectric ceramics for multilayer piezoelectric actuator, $PbSr(Mn_{1/3}Nb_{2/3})O_3-(Mg_{1/3}Nb_{2/3})O_3-(ZrTi)O_3$ ceramics were fabricated using $Na_{2}CO_{3}-Li_{2}CO_{3}$ as sintering aids and their piezoelectric and dielectric characteristics were investigated according to the sintering tempo rature. At the sintering temperature of $900^{\circ}C$, the density, electrom echanical coupling factor(kp), mechanical quality factor(Qm) and dielectric constant(${\varepsilon}r$) of specimen showed the optimum value of $7.730[g/cm^2]$, 0.552, 1134, 1492 and 330[pC/N], respectively.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1472-1473
• /
• 2006

During normal machine operation, partial discharge(PD) measurements were peformed with turbine generator analyzer(TGA) in two high voltage motors(rated 6.6 kV). These high voltage motors were installed with 80 pF capacitive couplers at the terminal box. TGA summarizes each plot with two quantities such as the normalized quantity number(NQN) and the peak PD magnitude (Qm). The trend analyses of NQN and $Q_m$ value are available for monitoring of the insulation condition in stator windings of high voltage motors.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1368-1369
• /
• 2006

In this thesis, the minuteness structure, piezoelectric, and dielectric characteristics of Pb[(Co0.5 W0.5) 0.03 (Ni1/3 Nb2/3) 0.07(Zr0.52 Ti0.48)0.9]O3+0.5Wt% MnO2 ceramics has been systematically investigated as a function of the sintering temperature after manufacturing the specimens with a general method. The electromechanical coupling coefficient (Kp) showed its maximum of 31.116[%] in the sintered specimens at $1050[^{\circ}C]$, and its minimum of 20.220[%] in the sintered specimens at $1150[^{\circ}C]$. The mechanical quality coefficient (Qm) marked the maximum of 139.526 at the sintering temperature of $1150[^{\circ}C]$.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2091-2093
• /
• 2005

Five model coils of 6.6kV motor were manufactured with several defects. These stator coils have artificial defects such as void of groundwall insulation, removal of semi-conductive coating and damage of strand insulation. Epoxy-mica coupler(80 pF) was connected to five model coil terminals, respectively The voltage applied to the coils was 3.81kV, 4.76kV, 6.0kV and 6.6kV. Partial discharge(PD) tests performed in the laboratory and shield room. Digital PD detector (PDD) and turbine generator analyzer(TGA) were used to measure PD activity. TGA summarizes each plot with two quantities such as the normalized quantity number(NQN) and the peak PD magnitude(Qm). The PD levels in pC were measured with PDD. PD patterns of model coils were indicated the internal and slot discharges. PD patterns coincide with both PDD and TGA.