• EDISON SW 활용 경진대회 논문집
• /
• 제3회(2014년)
• /
• pp.141-155
• /
• 2014

Peptide bond hydrolysis는 세포 내외의 생화학반응에 있어서 핵심이다. 하지만 amide Hydrolysis Mechanism은 아직 명확하게 규명되지 않았다. pH가 중성인 물에서의 비 촉매 가수분해가 발생하는 몇몇 실험적 증거가 있지만, 해당 반응 매커니즘은 4 가지(non-assisted concerted, non-assisted step-wise, assisted concerted, assisted step-wise)로 여전히 논란이 있다. 이번 연구에서는, Formamide의 가능한 Hydrolysis Mechanism을 자세히 연구해보고자 한다. 먼저, Ab-initio 계산을 통해 4가지 반응 메커니즘의 다시 한번 확인하고, quantum chemical calculations과 quantum mechanical molecular dynamic이 결합된 (QMMD) simulation을 통하여 water solvent에서의 반응 메커니즘의 에너지관계를 규명하였다. 결론적으로 아직 계산이 끝나지 않은 supported concerted mechanism을 제외한 모든 계산에서 non-supported, supported 두 system 모두에서 step-wise가 일어나기 쉬웠고, non-supported 보다 supported mechanism이 선호됨을 보였다. Intermediate인 amino-gem-diol의 수용액 상에서 안정화 또한 나타났다. 이는 Ab-initio 계산만 통해서는 정확하게 산출할 수 없는 엔트로피의 영향을 잘 보여준다.

• International Journal of Aeronautical and Space Sciences
• /
• 제5권1호
• /
• pp.6-18
• /
• 2004

This paper addresses the development and design of the HAUSAT-l (Hankuk Aviation University SA'Tellite-D communication subsystem, which is a next generation picosatellite, developed by SSRL (Space System Research Lab.) of Hankuk Aviation University. The communication subsystem generally consumes the majority of power and volume for picosatellites, and thus its design is critical to the overall satellite and mission plans. The HAUSAT-l designs are implemented by using the 145.84 MHz for uplink and 435.84 MHz for downlink frequency bands. The simulation and test results of the homemade radio and the TNC (Terminal Node Controller) integrated on the HAUSAT - I , a picosatellite scheduled to launch on September 2004 by Russian launch vehicle "Dnepr", are presented for EM, QM and FM, respectively.

• 광학세계
• /
• 통권150호
• /
• pp.31-41
• /
• 2014

현재까지 많은 업체에서 사용되는 비구면 표현식의 단점을 해결하여 직관적이며 예측가능한 면을 표현할 수 있는 새로운 비구면 표현식, 일명 Q Polynomials (또는 Forbes Polynomials, Q-type Polynomials)을 소개한다. Q Polynomials은 기존 quadratic polynomial을 이용한 표현식과 달리 서로 영향을 미치지 않는 유일한 함수 Qm를 기본으로 하는 다항식으로 구성되어 있기 때문에 각 계수는 하나의 비구면에 대해 유일한 계수다. 각 항의 함수의 모양이 이미 정해져 있기 때문에 계수들의 크기를 살펴보면 비구면도, 측정 가능성, 가공 및 생산 가능성에 대한 예측이 가능하다. 따라서 비구면 설계 시점에서부터 시험/검사, 생산이 실질적으로 가능한 비구면 광학요소인지가 판정되므로 설계시부터 설계자, 시험/검사자, 생산자 사이의 합의가 이루어지는 것과 같다. 따라서 생산성과 간섭계 측정을 이용한 초정밀 비구면를 제조할 수 있는 결과에 이르게 된다. 이미 도입한 여러 업체에서 긍정적인 결과를 얻고 있다. Q polynomials은 기존에 현업에서 사용되고 있는 광학 설계 프로그램에도 적용되어 사용 가능하다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 E
• /
• pp.2093-2096
• /
• 1999

This paper describes to access the insulation deterioration condition of the stator windings in three large turbine generators. Nondestructive tests have been carried out on stand-still generators which have been in service for 2 to 30 years. In most cases these tests include ac current increase rate($\Delta$I), delta tan delta( ${\Delta}tan{\delta}$), and maximum partial discharge(Qm). Gen. 2 show that the $tan{\delta}$ is higher than other two generators in the $tan{\delta}$-voltage curve. Partial discharge(PD) patterns were observed internal, corona and treeing discharges in large turbine generators. The PD tests were confirmed the correlation between discharge patterns and the kinds of defects.

• 마이크로전자및패키징학회지
• /
• 제2권1호
• /
• pp.69-75
• /
• 1995

압전세라믹스를 제조하여 발음체 소자의 두께 직경등의 칫수 변화에 따른 압전발을 체 소자의 전기적 특성 및 압전세라믹스와 금속진동판의 상관관계를 조사하고 공명용 수지 case등을 고려하여 공진 주파수에서 효율좋은 음을 발생시킬수 있는 압전발음체를 설계하였 다. 본 실험에서 사용딘 압전세라믹스 (Pb0.95Sr0.05)(Zr0.53Ti0.47)O3+0.8wt%Nb2O5의 특성은 전 기기계 결합계수(KP)가 69%이며 기계적 품질계수(Qm)은 87 비유전율은 2100 tan$\delta$는 0.016이었다. 금속진동판의 공진주파수는 사용되는 재료의 stiffness와 관계가 있고 주파수 -impedance 특성은 재질의 음속, 밀도, Young율 등에 크게 의존하였다. 주파수 대역 2.0~ 2.2khz에서 공진시키기 위한 공명체의 설계에서 압전세라믹스의 외경과 두께가 각각 14mm, 0.1mm 이고 금속진동판의 그것이 각각 20mm, 0.1mmdlfEo 공명기는 방음공의 직경이 3.0mm, cavity의 직경이 18.5mm, cavity의 높이가 4.5mm의 구조로 설계되었을때가 최적조 건이었다.

• 대한안전경영과학회지
• /
• 제6권3호
• /
• pp.65-75
• /
• 2004

Product liability is the law of the manufacturer's responsibilities for the consumers' personal injuries or the losses of property resulted from defective products. In today's many countries, the product liability law are being enacted because of the safety of product use and the protection of consumer's right. In korea, the product liability is going to enforce on July 1, 2002. Though the construction of product liability response system is urgent situation, domestic manufacture company's PL response system is not nearly prepared in present. Consequently, the purpose of this study is to discuss the Quality Management's importance and the PL countermeasures by presenting the difference of PL response system construction degree by the Quality Management Maturity degree

• 반도체디스플레이기술학회지
• /
• 제19권3호
• /
• pp.73-76
• /
• 2020

The physics-based compact gate leakage current noise models in nanoscale MOSFETs are developed in such a way that the models incorporate important physical effects and are suitable for circuit simulators, including QM (quantum-mechanical) effects. An emphasis on the trap-related parameters of noise models is laid to make the models adaptable to the variations in different process technologies and to make its parameters easily extractable from measured data. With the help of an accurate and generally applicable compact noise models, the compact noise models are successfully implemented into BSIM (Berkeley Short-channel IGFET Model) format. It is shown that the noise models have good agreement with measurements over the frequency, gate-source and drain-source bias ranges.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 춘계학술회의 초록집
• /
• pp.6-6
• /
• 2010

In this study, microstructural and piezoelectric characteristics of PNW-PMN-PZT ceramics manufactured using attrition milling method were investigated. Sintering temperature of the ceramics was varied from $980^{\circ}C$ to $1100^{\circ}C$. At the specimen sintered at $1100^{\circ}C$, mechanical quality factor(Qm) and dielectric constant showed the maxinum values of 2,373 and 1438, respectively. At the specimen sintered at $1080^{\circ}C$, electromechanical coupling factot(kp) also showed the maxinum value of 0.524.

• 항공우주시스템공학회지
• /
• 제2권1호
• /
• pp.22-27
• /
• 2008

It is anticipated that quality assurance for the Ka band Communication Payload System(COPS) development program of the Communication, Ocean & Meteorological Satellite(COMS) may be a core technical factor to be concerned in order to avoid any failure, and to assure its performance during the mission lifetime in space. Those can be managed and verified and assessed by performing the Quality Assurance (QA) and risk management which helps to prevent and reduce the critical fails. This paper introduces the Product Assurance (PA) system and procedures for Ka band Communication Payload System which was established and performed during the Qualification Model (QM) manufacturing phase. In this paper, we present detailed process for the products manufactured by local companies according to PA procedures operated through whole phases from design to test of equipment. Also this paper shows Quality Assurance (QA) procedures and detailed their processes for assured the product quality manufactured by local companies.

• 미생물학회지
• /
• 제24권2호
• /
• pp.91-97
• /
• 1986

Intra and interspecfic fusants were produced by the protoplast fusion of auxotrophic mutants from Trichoderma koningii ATCC 26113 and Trichoderma reesei QM 9414. It was found that 0.6M $MgSO_4\;and\;0.6M\;NH_4Cl$ was the best osmotic stabilizer for the preparation of protoplasts from the mycelium of T. koningii and T. reesei respectively. However, $MgSO_4$ was the most suitable one for the regeneration of the protoplasts from both species. The intraspecific protoplast fusion frequencies between the auxotrophic mutants from T. reesei were $1.8{\times}10^{-2}\;to\;5.1{\times}10^{-1}$. Interspecific protoplast fusion frequencies between the auxotrophic mutants from T. koningii and T. reesei were $3.6{\times}10^{-3}$\;to\;8.4{\times}10^{-2}. Interspecific complementing fusants, however, were not alwats produced. Fusants obtained from interspecific potoplast fusion were spontaneously segregated into various strains including parental types, non-parental auxotrophic hybrids, and prototrophic hybrids on complete plate. Interspecific hybrids revealed to have partially enhanced celluloytic activities.