• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.6
• /
• pp.466-468
• /
• 2009

The metal-insulator-silicon (MIS) capacitors with $SiO_2$ and high-k dielectrics ($HfO_2$, $Al_2O_3$) were fabricated, and the current-voltage characteristics were investigated. Especially, an effective barrier height between metal gate and dielectric was extracted by using Fowler-Nordheim (FN) plot and Direct Tunneling (DT) plot of quantum mechanical(QM) modeling. The calculated barrier heights of thermal $SiO_2$, ALD $SiO_2$, $HfO_2$ and $Al_2O_3$ are 3.35 eV, 0.6 eV, 1.75 eV, and 2.65 eV, respectively. Therefore, the performance of non-volatile memory devices can be improved by using engineered tunnel barrier which is considered effective barrier height of high-k materials.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.323-323
• /
• 2018

최근 기후변화에 대한 관심이 증대됨에 따라 미래 기후모델자료를 기반으로 연구가 다양하게 진행되고 있다. 기후변화가 적용된 자료는 미래 수자원관리, 방재를 위한 수공구조물의 설계 등 다양한 방식으로 실무에 적용되고 있다. 하지만 기후모델로부터 모의된 결과는 어느 정도 관측자료와 차이가 발생하게 되며, 이러한 계통적 오차는 모델 내부에서 해결하기가 쉽지 않다. 그렇기 때문에 기후모델로부터 모의된 결과를 보정하기 위해 편의보정 기법을 활용한다. 그리고 미래 기후모델자료는 불확실성을 내재하고 있기 때문에 다양한 편의보정 기법을 적용하여 불확실성의 범위를 확인해 보았다. 사용된 편의보정 기법으로는 Quantile Mapping(QM), Quantile Delta Mapping(QDM), Detrended Quantile Mapping(DQM), Delta Change Method(DCM)을 이용하였다. 편의보정에 적용한 확률분포형은 일반극치분포(GEV분포), Type-1 극치분포(Gumbel분포)를 사용하였다. GEV분포를 기본으로 하여 조건적으로 GEV분포를 사용할 수 없는 경우, Gumbel분포를 사용하였다. 본 연구에서는 독일의 전지구기후모델(Global Climate Model, GCM)인 MPI-ESM-LR에 RCP 8.5 사나리오를 강제장으로 하여 지역기후모델(Regional Climate Model, RCM)인 WRF를 이용하여 동역학적으로 다운스케일한 강우자료를 사용하였다. 강우자료 중에서 강릉, 인천, 부산, 목포지점에 해당하는 자료를 추출하여 연 최대 강우강도 시계열을 산정하고 4가지 편의보정 기법을 이용하여 편의보정을 하였다. 편의보정 수행된 연 최대 강우강도 시계열을 scale-invariance 기법으로 다운스케일하여 미래 IDF곡선을 유도한 뒤, 편의보정별로 유도한 IDF곡선의 비교를 통해 편의보정기법이 미래 IDF곡선에 미치는 영향을 분석하였다.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.1 no.2
• /
• pp.171-175
• /
• 2000

Determined sequences of 384 randomly selected clones in a PCR-based cDNA library of Antheraea yamamai could identify expressed sequence tags (ESTs) of highly expressed gene. One EST (fibroin) appeared 15 times, one EST (40S ribosomal protein S18) twelve times, one EST (ribosomal protein S24a) eleven times, ten times (ribosomal protein S8), nine times (60S ribosomal protein L10A), seven times (60S ribosomal protein S15A, S17, S17 and seroin), six times (ribosomal protein S8), five times (ribosomal protein S24, mariner transposase and P8 protein), four times (serpin 2), three times (heat shock protein 70 and poly A binding protein), and the remaining 6 ESTs twice (amylase, KIAA1006, elongation factor-1, transposon mag, translation initiation factor 4C, QM protein, transposase). Therefore, the 94 EST make it possible to identify 24 redundant clones that are candidates for highly expressed genes in posterior silk gland of this insect. The 24 redundant EST clones were identified in GenBank, but none of them was related to A. yamamai, suggesting that there are many unidentified genes which are highly expressed in the A. yamamai genome.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1723-1725
• /
• 1999

This paper is the study for piezoelectric properties of PMN-PT-PZ composition for high power piezoelectric device. It needs the properties such as high mechanical quality factor(Qm), high electromechanical coupling coefficient(kp) and high dielectric strain constant$(d_31)$, and the stable electromechanical properties under high vibration level. For acquiring this results, the value of x is changed in 0.1Pb$(Mn_{1/3}Nb_{2/3})O_3$+(0.9-x)$PbZrO_3+xPbTiO_3$ composition to find MPB(morphotropic phase boundary), and the piezoelectric constants is measured by resonance-antiresonance frequency method, based on IRE Standard. Also, it is measured as a function of the amount of additive, $Nb_2O_5$. When the composition is applied to high power device, the electromechanical properties is measured by laser vibrometer to confirm the reliablity under high vibration level. From these results, PMN-PT-PZ composition is shown excellent properties and capacity of application to high power device.

• Journal of the Korea Safety Management & Science
• /
• v.15 no.3
• /
• pp.151-161
• /
• 2013

This paper proposes a strategic model of linkage between productivity metrics and financial accounting metrics to properly evaluate the financial effect of TPM activities and the business performance. This linkage strategy provides a connection tool for clear communication between factory-level and headquarters that the metrics proposed by this paper ultimately improves a quality of support from the management by receiving the factors required for productivity activities in the practical field. This factor includes such as equipment, raw materials and labors. Here, we propose that chain reaction models using break down structure of productivity metrics and financial metrics enhance the knowledge sharing of KPI (Key Performance Indicator) which generally tend to create oversimplified communication between management in headquarters and employees in the practical fields. The productivity metrics include OEE(Overall Equipment Effectiveness) of TPM (Total Productive Maintenance), OLE (Overall Labor Effectiveness) of PAC(Performance and Analysis and Control) activities, and OYE (Overall Yield Effectiveness) of TMM(Total Material Management) activities. The financial accounting metrics include ROE(Return on Equity), ROA(Return on Asset), and AVR(Added-Value Rate). The suggested chain reaction model selects the financial metrics as initial stage and branch down until final stage of productivity metrics. When demand exceeds supply, an ideal speed rate, the lean OEE strategy can be initially applied to reduce the gap between the demand and supply, then apply variable costing to estimate correct amount of operating profit. In addition, the paper presents a new type of model for linkage between financial accounting metrics including CAPEX(Capital Expenditure), OPEX(Operating Expenditure), EVA(Economic Added Value), DCL(Degree of Combined Leverage), and TPM productivity activities including AM(Autonomous Maintenance), PM(Preventive Maintenance), MP(Maintenance Prevention) and QM(Quality Maintenance). In order to support the evidence of proposed linkage strategy, a case analysis on 52 projects from national TPM contest from 2011 to 2012 is analyzed. The case presents the classification of CAPEX and OPEX activities from TPM, and proposes the correct implementation of financial effect for TPM projects.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.158-158
• /
• 2009

기계적 에너지를 전기적 에너지로 변환하는 에너지 변환소자인 압전 세라믹스는 액추에이터, 변압기, 초음파모터 및 각종 센서로 응용되고 있으며, 그 응용분야는 크게 증가하고 있다. 최근에는 이러한 압전 소자를 앞으로 도래하는 ubiquitous, 무선 모바일 시대의 휴대용 전자제품, robotics 등의 분야에 적용하기 위하여 소형화 및 경량화를 구현하고자 다양한 연구가 진행되고 있다. 본 연구에서는 압전 특성이 우수한 PNN-PMN-PZT 삼원계 세라믹을 이용하여 압전 트랜스포머를 제작하고 전기적 특성을 평가하였다. 압전트랜스포머는 전왜-압전효과를 이용한 소전력용 고전압발생소자로서 종래의 권선형 트랜스포머에 비교해서 소형, 경량이면서 승압비가 높고 구조가 간단하므로 직류 고전압전원에 응용되고 있다. 압전트랜스의 이론적인 고찰은 Rosen 이후로 많은 연구자들에 의해서 보고되었다. 그런데 압전세라믹트랜스는 공진 시 강력한 에너지변환을 하기 때문에 재료의 물리적 특성이 매우 중요함에도 불구하고, 이러한 물리적 특성에 관한 연구는 거의 없었다. 따라서 본 연구에서는 물리적 특성과 전기적 특성의 상호 연관성을 고찰하고자 하였다. 압전트랜스용 재료는 전기기계결합계수($k_p$)와 기계적품질계수(Qm)가 높아야 한다. 전기기계결합계수를 높이기 위해서는 상경계 조성의 Pb(Zr,Ti)$O_3$[PZT]계 세라믹스가 가장 우수하다. 본 연구에서는 기계적 품질계수를 향상시키기 위해서 $Pb(Nn_{1/3}Nb_{2/3})_{0.06+x}(Mn_{1/3}Nb_{2/3})_{0.065-x}(Zr_{0.48}Ti_{0.52})_{0.875}0_3$계의 조성을 설계하여 압전특성을 평가하고 미세구조를 분석하였다. 또한 압전트랜스를 제작하여 입출력의 승압비 및 주파수 특성 등도 평가하였다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.10
• /
• pp.935-941
• /
• 2006

In this paper, the dielectric and piezoelectric properties of $0.4Pb(Ni_{1/3}Nb_{2/3})O_3+0.6Pb(Zr_{405}Ti_{595})O_3+X\;wt%\;Fe_2O_3$ ceramics were investigated with the addition of $Fe_2O_3$ and sintering temperature. Dielectric constant and piezoelectric constant increased with amount of $Fe_2O_3$ to 0.25 wt% and then decreased the further addition of $Fe_2O_3$. It seems that $Fe_2O_3$ acts as a sintering aid at the sintering temperature of $1150^{\circ}C$. By the addition of $Fe_2O_3$., sintering temperature of the system was lowered from $1250^{\circ}C\;to\;1100^{\circ}C$. The piezoelectric properties showed the maximum value of ${\varepsilon}r=4669,\;d_{33}=810(10^{-12}m/V)$, kp = 77 %, Qm = 55, in $0.4Pb(Ni_{1/3}Nb_{2/3})O_3\;-0.6Pb(Zr_{0.405}Ti_{0.595})O_3+0.25wt%\;Fe_2O_3$ ceramics having composition near the morphotropic phase boundary. The composition may be appropriate for actuator materials because of high piezoelectric constant and electromechanical coupling factor.

• Information Systems Review
• /
• v.7 no.2
• /
• pp.1-21
• /
• 2005

Integrated Railroad Information System(IRIS) Construction Project is one of the super projects in Korea required to invest over 100 billion won and 10,000 engaged manpower until Dec 30, 2004. Composition of this paper is as follows; firstly, examined individual contents and aspects of IRIS, and studied formality and contents that have been based to project methodology for successful propulsion of project in overall situation of SI project progress until present. Secondly, presented for construction background of IRIS as well as Project Management and Project Development Methodologies. Thirdly, described each characteristic and development substance for individual systems after present whole contents and system image of the system. Finally, presented successful propulsion result of this project and development directions. We presented development example laying stress on IRIS's Project contents and propulsion circumstances. Evaluation about operation results should be analyzed and studied in detail operating system from now on.

• Journal of the Korean Society of Radiology
• /
• v.12 no.5
• /
• pp.683-692
• /
• 2018

Mammography using mammography equipment is a method of examination that is being employed most widely to diagnose the early stages of breast cancer. Detecting or diagnosing a fibrous tissue, micro calcification, or mass in the breast is influenced by the quality management of mammography equipment considerably. Particularly in mammography, quality management refers to a behavior of figuring out and correcting all sorts of hindrance factors that can cause all the problems related to the equipment associated with the diminishment of diagnosed area due to the reduction of image quality in clinical imaging in advance and maintaining a consistent level of image quality and obtaining a proper image. Here, these researchers aim to summarize and report the general contents of quality management in mammography using mammography equipment.

• Journal of Wetlands Research
• /
• v.21 no.spc
• /
• pp.51-60
• /
• 2019

In this study, we performed At-site Frequency Analysis(AFA) and Regional Frequency Analysis(RFA) using the observed and climate change scenario data, and the relative root mean squared error(RMMSE) was compared and analyzed for both approaches through Monte Carlo simulation. To evaluate the rainfall quantile, the daily rainfall data were extracted for 615 points in Korea from HadGEM3-RA(12.5km) climate model data, one of the RCM(Regional Climate Model) data provided by the Korea Meteorological Administration(KMA). Quantile mapping(QM) and inverse distance squared methods(IDSM) were applied for bias correction and spatial disaggregation. As a result, it is shown that the RFA estimates more accurate rainfall quantile than AFA, and it is expected that the RFA could be reasonable when estimating the rainfall quantile based on climate change scenarios.