• Journal of Korean Society for Atmospheric Environment
• /
• v.17 no.E1
• /
• pp.25-33
• /
• 2001

This paper presents an overview of the UK Hydrocarbon Monitoring Network and summarises some of the lessons learnt from running and automated VOC monitoring network in th UK. The paper will describe the operation of the network and the Quality Control and Quality Assurance (QA/QC) procedures used to ensure that the data qality objectives are met. The provision of accurate measurements of ambient air pollutant concentrations is a valuable and high-profile service of Governments, assisting policy decisions and allowing members of the public to be well-informed. The need for such measurements has been increased in the UK by the National Air Quality Strategy and European Air Quality Directives, with the National Networks playing a central role in delivering the information. The Hydrocarbon Network provides measurements directly in support of monitoring requirements for benzene and 1,3-butadiene, and of 23 other hydrocarbon species important for their role in ozone and secondary particulate formation.

• Proceedings of the Safety Management and Science Conference
• /
• 2010.04a
• /
• pp.231-237
• /
• 2010

The purpose of this study was to investigate the actual conditions of radiation safety supervision in animal clinics using quality assurance (QA) and quality control (QC) of diagnostic X-ray units. The surveys for QA/QC, equipment condition, and safety supervision were carried out in 18 animal clinics randomly. The QA/QC included reproducibility of dose exposure, kVp, mAs, collimator accuracy test, collimator luminance test, X-ray view box luminance test, grounding system equipment test and external leakage current test. As a result, 44.44% of reproducibility of dose exposure was proper, 81. 25% of kVp test was good, and 100% of mAs test was appropriate. Also, 66.66% of collimator accuracy test was proper, 61.11% of collimator luminance test was good, 53.13% of X-ray view box luminance test was suitable. In addition, only 5.55% of grounding system equipment and ground resistance was proper, 63.64% of external leakage current test was appropriate in grounding system equipment test.

• Quality Improvement in Health Care
• /
• v.14 no.1
• /
• pp.61-68
• /
• 2008

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.613-619
• /
• 2017

Recently, the development and production of weapons systems for military products have been increasing. Therefore, there is a need for an efficient quality control method suitable for limited resources and manpower for the manufactured military products. Military munitions are characteristically developed and produced as business contract units. In addition, business and quality control are done by contract. For this reason, many contracts are concluded in one producer and similar products are often produced. Business and quality control also require extensive manpower and effort. If a company produces several similar products, a more efficient management approach is required. This study therefore examines these problems in an attempt to present solutions by analyzing the types of munitions contracts and the characteristics of products produced by one company. Based on the results, a method is proposed to manage the contract-specific management methods by company, that is, by business site. The method is applied to an engine manufacturing company and the integrated management plan is verified and its effectiveness confirmed. The effect of facility-wide method was a reduction of QA manpower and an improvement in maintaining quality assurance and stability through management of the workforce and contract grouping method.

• Korean Journal of Comparative Education
• /
• v.18 no.4
• /
• pp.27-55
• /
• 2008

Since quality assurance and enhancement (QAE) raises the fundamental issue of the survival of higher education institutions and national competitiveness, guides on quality assurance (QA) are popular both domestically and worldwide. Despite the focus in many countries on trying to establish and implement QA systems, no clear investigation has been conducted on what actually happens in the institutions. Therefore, the present study examines the quality control system of the UK at an institutional level by focusing on the case of Scotland QAE. As Scottish QAE especially emphasizes student engagement and quality culture, this study investigates the present QAE situation in the institution and current ideas for better future practices by analyzing the perceptions of internal stakeholders' from the University of Edinburgh, School of Education, based on the stakeholder theory and implications for other contexts. The stakeholder analysis results demonstrate the successful application of QAE with a high level of understanding and stakeholder interest. However, the current strategy is missing certain opportunities for staff and students. Therefore, further information disclosure, formative evaluation, better communication and administrational supports are required for improved practice.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.21 no.1
• /
• pp.29-33
• /
• 2017

Purpose In this study, we evaluated image by applying normalization factor during 30 days to the PET images. Materials and Methods Normalization factor was acquired during 30 days. We compared with 30 normalization factors. We selected 3 clinical case (PNS study). We applied for normalization factor to PET raw data and evaluated SUV and count (kBq/ml) by drawing ROI to liver and lesion. Results There is no significant difference normalization factor. SUV and count are not different for PET image according to normalization factor. Conclusion We can get a lot of information doing the quality assurance such as performance of sinogram and detector. That's why we need to do quality assurance daily.

• Progress in Medical Physics
• /
• v.32 no.4
• /
• pp.116-121
• /
• 2021

Purpose: To investigate the effects of dose rate on intensity-modulated radiation therapy (IMRT) quality assurance (QA). Methods: We performed gamma tests using portal dose image prediction and log files of a multileaf collimator. Thirty treatment plans were randomly selected for the IMRT QA plan, and three verification plans for each treatment plan were generated with different dose rates (200, 400, and 600 monitor units [MU]/min). These verification plans were delivered to an electronic portal imager attached to a Varian medical linear accelerator, which recorded and compared with the planned dose. Root-mean-square (RMS) error values of the log files were also compared. Results: With an increase in dose rate, the 2%/2-mm gamma passing rate decreased from 90.9% to 85.5%, indicating that a higher dose rate was associated with lower radiation delivery accuracy. Accordingly, the average RMS error value increased from 0.0170 to 0.0381 cm as dose rate increased. In contrast, the radiation delivery time reduced from 3.83 to 1.49 minutes as the dose rate increased from 200 to 600 MU/min. Conclusions: Our results indicated that radiation delivery accuracy was lower at higher dose rates; however, the accuracy was still clinically acceptable at dose rates of up to 600 MU/min.

• Journal of radiological science and technology
• /
• v.45 no.6
• /
• pp.491-502
• /
• 2022

The purpose of this study was to retrospectively investigate the upper and lower control limits of treatment planning parameters using EBT film based delivery quality assurance (DQA) results and to analyze the results of statistical process control (SPC) in helical tomotherapy (HT). A total of 152 patients who passed or failed DQA results were retrospectively included in this study. Prostate (n = 66), rectal (n = 51), and large-field cancer patients, including lymph nodes (n = 35), were randomly selected. The absolute point dose difference (DD) and global gamma passing rate (GPR) were analyzed for all patients. Control charts were used to evaluate the upper and lower control limits (UCL and LCL) for all the assessed treatment planning parameters. Treatment planning parameters such as gantry period, leaf open time (LOT), pitch, field width, actual and planning modulation factor, treatment time, couch speed, and couch travel were analyzed to provide the optimal range using the DQA results. The classification and regression tree (CART) was used to predict the relative importance of variables in the DQA results from various treatment planning parameters. We confirmed that the proportion of patients with an LOT below 100 ms in the failure group was relatively higher than that in the passing group. SPC can detect QA failure prior to over dosimetric QA tolerance levels. The acceptable tolerance range of each planning parameter may assist in the prediction of DQA failures using the SPC tool in the future.

• Journal of Korean Society for Quality Management
• /
• v.10 no.1
• /
• pp.27-42
• /
• 1982

품질관리(品質管理)가 단순(單純)히 품질(品質)을 관리(管理)하는 통계적(統計的)인 수법(手法)으로서의 역할(役割)을 벗어나 경영관리(經營管理)의 새로운 시스템으로서 등장되던 1960년 전후부터 품질보증(品質保證)(quality assurance:QA)의 중요성(重要性)이 점차(漸次) 높아지게 되었다. 1959년(年)에 미국(美國)의 자동차업계(自動車業界)에서 시작(始作)된 마일에이지 보증(保證)(mileage warranty)이나, 이어서 보급된 내구소비재(耐久消費財)의 1년 보증제(保證制) 등이 QA의 발달(發達)의 계기(契機)가 되었다. 뿐만 아니라 점점 복잡화 되어가고 있는 제품(製品)에 대(對)한 안전성(安全性)이 강하게 요청(要請)되고 있다거나, 소비자(消費者)의 제품(製品)에 대(對)한 뉴스가 다양화(多樣化)되어 온것도 QA의 용요성(用要性)이 일반(一般)에게 인식(認識)되기 시작(始作)한 요인(要因)이었다고 생각한다. 이때부터 품질보증(品質保證)이라는 말이 널리 사용(使用)되어 왔다. 그러나 그 말을 사용(使用)하는 사람에 따라 뉴안스를 달리하는 경우가 많다. 즉 품질보증(品質保證)이라는 말의 해석(解釋)이 구구하다. 품질보증(品質保證)이란 무엇을 의미(意味)하는가, 그리고 품질보증(品質保證)의 방법(方法)은 어떤 것인가에 대(對)해 부족(不足)하나마 평소(平素)에 가지고 있던 생각을 여기에 정리(整理)해 볼까 한다.

• Radiation Oncology Journal
• /
• v.24 no.3
• /
• pp.185-191
• /
• 2006

[ $\underline{Purpose}$ ]: Standardization quality assurance (QA) program of CyberKnife for suitable circumstances in Korea has not been established. In this research, we investigated the development of QA program for CyberKnife and evaluation of the feasibility under applications. $\underline{Materials\;and\;Methods}$: Considering the feature of constitution for systems and the therapeutic methodology of CyberKnife, the list of quality control (QC) was established and divided dependent on the each period of operations. And then all these developed QC lists were categorized into three groups such as basic QC, delivery specific QC, and patient specific QC based on the each purpose of QA. In order to verify the validity of the established QA program, this QC lists was applied to two CyberKnife centers. The acceptable tolerance was based on the undertaking inspection list from the CyberKnife manufacturer and the QC results during last three years of two CyberKnife centers in Korea. The acquired measurement results were evaluated for the analysis of the current QA status and the verification of the propriety for the developed QA program. $\underline{Results}$: The current QA status of two CyberKnife centers was evaluated from the accuracy of all measurements in relation with application of the established QA program. Each measurement result was verified having a good agreement within the acceptable tolerance limit of the developed QA program. $\underline{Conclusion}$: It is considered that the developed QA program in this research could be established the standardization of QC methods for CyberKnife and confirmed the accuracy and stability for the image-guided stereotactic radiotherapy.