• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.3C
• /
• pp.250-257
• /
• 2006

In this paper, we propose an efficient algorithm for the RDO mode decision in H.264/AVC encoder. Based on the properties of DCT coefficients and the RDO mode decision processing, we derive a new condition for detecting an error block having all-zero DCT coefficient (AZCB). (I)DCT, (I)Q, and entropy coding are skipped for AZCBs in the proposed algorithm. It makes the reduction of the computational complexity for the RDO mode decision. Simulation results show that the proposed algorithm achieves computational saving over 40% compared to the conventional method.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.6
• /
• pp.517-525
• /
• 2011

Differential Vibrating Accelerometer(DVA) is a small and accurate resonant device to sense the change in natural frequency in presence of acceleration input. Both mathematical modeling for the electromechanical dynamics and experimental investigation on the structural characteristics are necessary for effective designs of precision controller and high Q-factor structure. In this paper, electromechanical modeling of the resonator of DVA, electrode module, and pre-amplifier is presented. The presented method is experimentally verified by measuring the resonance frequency, effective mass, effective stiffness and Q-factor. The direct comparison of the calculated displacement and the actual pre-amplifier of DVA also indicates the effectiveness of this study.

• 한국정보통신설비학회:학술대회논문집
• /
• 2005.08a
• /
• pp.137-140
• /
• 2005

본 논문은 낮은 품질계수의 공진기를 사용한 여파기의 통과대역 평탄도를 개선하기 위한 2단 상보 여파기의 설계를 연구하였다. 품질계수로 인해 상보 여파기 평탄도 특성 변화를 고려하여 낮은 품질계수의 공진기를 사용하고, 기존의 여파기 설계공식에 그대로 적용할 수 있는 상보 여파기의 설계변수를 제시하였다. 제시한 설계변수로 상보 여파기를 설계하여 전체적인 통과 대역 평탄도를 1dB 이내로 만들 수 있었다.

• Journal of the Korean Geotechnical Society
• /
• v.25 no.6
• /
• pp.5-16
• /
• 2009

The is study is to evaluate the small strain shear modulus ($G_{max}$) of Busan clay using in-situ penetration tests. A series of dilatometer tests (DMT) and piezocone penetration tests (CPTu) are performed at Busan newport and Noksan sites, and hybrid oedometer tests are also carried out on the specimens obtained from both sites. The $G_{max}$ is evaluated from the shear wave velocity ($V_s$) measured by the bender elements installed at the boundary of oedometer cell. By analyzing these data, the relationship of $G_{max}$ and state variables, such as confined stress and void ratio, is developed. The analysis of lab and in-situ test results reveals that the ratio of $G_{max}$ to $q_t$ is inversely proportional to the plasticity index while the ratio of $G_{max}$ to $E_D$ has a linear relationship with ($I/I_D$)$(p_a/{\sigma}'_v)^{0.5}$. Two correlations suggested in this study, based on CPT and DMT results, appear to provide reasonable predictions of the small strain shear modulus.

• Geophysics and Geophysical Exploration
• /
• v.12 no.4
• /
• pp.281-288
• /
• 2009

Using analytical method, intrinsic absorption and scattering attenuation was lately separated from total quality factor $(Q^{-1}_t)$ on the seismic data of Korean Peninsula. However, we should use numerical method rather than the analytical method to consider depth dependent structure of scattering. The direct simulation Monte Carlo (DSMC) method, as a kind of the numerical method, is good option due to its extended availability from 1 to 3-dimensional model; but there is few study to use it. In this paper, we introduced the analytical method and the DSMC method, and compared the results of the two analysis applied to the isotropic scattering model. While the scattering attenuation coefficients $(\eta_s)$ are identical, the intrinsic absorption coefficients $(\eta_i)$ for the analytical method are larger than those for DSMC method and have large errors. In addition, the $(Q^{-1}_t)$ by the previous studies show closer to DSMC method than analytical method.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.5 no.2
• /
• pp.128-137
• /
• 2003

Net radiation (Rn) is one of the most fundamental components in surface energy budget. For an accurate measurement of Rn, periodic and consistent calibrations of net radiometers are required. With a 4-month time interval, two field experiments were conducted to inter-compare and calibrate two types of net radiometers (the Q-7.1 and the CNR1), widely used in flux measurements. Differences between the Q-7.1 and the CNR1 net radiometers were within 7.7%, and the errors after calibration against the standard net radiometer were ＜3.2%. Radiometric responses and calibration factors appeared to have changed with sky renditions, especially temperature difference with season's progress. We concluded that the periodically calibrated Q-7.1 can replace more expensive, more accurate CNR1 net radiometer for long-term field measurements, providing that field calibrations of net radiometers are performed every 4-6 months interval.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.6
• /
• pp.39-47
• /
• 2012

As a scheme to efficiently reduce the effects of multipath fading in next generation wireless communication systems, cooperative communication systems have recently come into the spotlight. Since these cooperative communication systems use cooperative relays with diverse fading coefficients to transmit information, having all relays participate in cooperative communication may result in unnecessary waste of resources, and thus relay selection schemes are required to efficiently use wireless resources. In this paper, we propose an efficient relay selection scheme through self-learning in cooperative wireless networks using Q-learning algorithm. In this scheme, we define states, actions and two rewards to achieve good SER (Symbol Error Rate) performance, while selecting a small number of cooperative relays. When these parameters are well-defined, we can obtain good performance. For demonstrating the superiority of the proposed Q-learning, We compared the proposed scheme with Q-learning and a relay selection scheme with a mathematical analysis. The simulation results show that, compared to a scheme that obtains optimum relays through a mathematical analysis, the proposed scheme uses resources efficiently by using smaller numbers of relays with comparable SER performance. According to these simulation results, the proposed scheme can be considered as a good attempt for future wireless communication.

• Journal of Korea Water Resources Association
• /
• v.53 no.11
• /
• pp.985-997
• /
• 2020

SWAT (Soil and Water Assessment Tool)-MODFLOW (Modular Groundwater Flow) is a coupled model that linking semi-distributed watershed hydrology with fully-distributed groundwater behavior. In this study, the groundwater simulation results of SWAT and SWAT-MODFLOW were compared for Bokhacheon watershed in Namhan river basin. The models were calibrated and validated with 9 years (2009~2017) daily streamflow (Q) data of Heungcheon (HC) water level gauge station and the daily groundwater level observation data of Yulheon (YH). For SWAT, the groundwater parameters of GW_DELAY, GWQMN, and ALPHA_BF affecting baseflow and recession phase were treated. The SWAT results showed the coefficient of determination (R²) of 0.7 and Nash-Sutcliffe model efficiencies (NES_Q, NSE_inQ) for Q and 1/Q with 0.73 and -0.1 respectively. For SWAT-MODFLOW, the spatio-temporal aquifer hydraulic conductivity (K, m/day), specific storage (S_s, 1/m), and specific yield (S_y) were applied. The SWAT-MODFLOW showed R², NSE_Q, and NSE_inQ of 0.69, 0.74, and 0.51 respectively. The SWAT-MODFLOW considerably enhanced the low flow simulation with the help of aquifer physical information. The total streamflow of SWAT and SWAT-MODFLOW were 718.6 mm and 854.9 mm occupying baseflow of 342.9 mm and 423.5 mm respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.6
• /
• pp.558-566
• /
• 2003

We fabricated thick film monopole antennas using Li-doped BiNbO$_4$ ceramics and investigated their electrical properties as a function of the Li-doping concentration. Compared with undoped BiNbO$_4$ ceramics, addition of Li$_2$CO$_3$ improved dielectric constant by increasing of ionic polarization, but reduced quality value by increasing of lattice distortion. Antenna properties like gain, bandwidth and radiation patterns were also greatly affected by the addition of Li$_2$CO$_3$. With increasing amount of Li$_2$CO$_3$, the bandwidth of ceramic monopole antenna was increased to 81.7 %, but the gain was reduced to -10.03 dBi. Also radiation patterns were so distorted and showed low dB value by increasing of dielectric loss.

• Journal of Broadcast Engineering
• /
• v.4 no.2
• /
• pp.127-133
• /
• 1999

The conventional fractal image compression based on discrete wavelet transform uses the fixed block size in fractal coding and reduces PSNR at low bit rate. This paper proposes a fractal image coding based on discrete wavelet transform which improves PSNR by using variable block size in fractal coding. In the proposed method. the absolute values of discrete wavelet transform coefficients are computed. and the discrete wavelet transform coefficients of different highpass subbands corresponding to the same spatial block are assembled. and the fractal code for the range block of each range block level is assigned. and then a decision tree C. the set of choices among fractal coding. "0" encoding. and scalar quantization is generated and a set of scalar quantizers q is chosen. And then the wavelet coefficients. fractal codes. and the choice items in the decision tree are entropy coded by using an adaptive arithmetic coder. This proposed method improved PSNR at low bit rate and could achieve a blockless reconstructed image. As the results of experiment. the proposed method obtained better PSNR and higher compression ratio than the conventional fractal coding method and wavelet transform coding.rm coding.