• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.3
• /
• pp.160-166
• /
• 2001

A numerical analysis has been performed for natural convection in an air conditioner duct system. The governing equations were solved a finite volume method using a SIMPLE algorithm. In the calculation mode of duct, the room temperature was preserved at $25.0^{\circ}C$ and duct wall temperature had a temperature of 15, 20.0, 22.5, 23.75, 26.25, 27.5 30 and $35^{\circ}C$. The results of velocity vectors and contours have been represented for various parameters. Based on the numerical data, the relationships between temperature difference and flow rate into room was represented. In the case of $T_\gamma>T_\omega$, the equation for temperature difference and flow rate was $Q=0.0285\triangleT^0.4005$, and in the case of $T_\gamma>T_\omega$, the equation was $Q=0.0099\triangleT^0.4752$. The duct system has an important relation to room temperature and duct wall temperature.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.9A
• /
• pp.1485-1491
• /
• 2001

본 논문에서는 위성체내에 탑재되어 있는 중계기의 출력단에 해당하는 한 개의 주파수 도약 시퀀스를 사용하는 하나의 그룹 FH/FDMA 시스템을 구성해 보고 중계기의 입력단에 도달하는 여러 사용자 신호들의 지연시간 때문에 순방향링크상의 원하는 사용자의 수신기에서 바라보았을 때 지연된 다른 사용자 신호들에 의한 hit 발생 가능성을 고려해서 첫째 겹치는 슬롯수를 도약 심볼수 q에 따라 변화시켜가며 성능 저하에 큰 영향을 미치지 않는 최적의 q를 찾아보았고, 둘째 q를 고정시켰을 때 시스템의 주파수 도약 대역폭 변화에 따른 성능 변화를 관찰했으며, 셋째 그 이유에 대한 성능 분석을 하였다.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.294-298
• /
• 2003

In this paper, the modeling and design of high-Q multilayer passives have been investigated, and multilayer diplexer for GSM/DCS applications has been designed and fabricated using the passives. To minimize the system, the configuration of a multilayer inductor has involved a square spiral structure. Modeling of a multilayer inductor was performed by the subsystems of distributed components, and using the modeling the optimal structures of the high-Q multilayer inductor could be designed by analyzing parasitics and couplings which affect their frequency characteristics. Multilayer diplexer for GSM/DCS application has been designed and fabricated using LTCC technology. LPF for GSM band had the passband insertion loss of less than 0.55 dB, the return loss of more than 12 dB, and the isolation level of more than 26 dB by locating attenuation pole at 1800 MHz. HPF for DCS band had the passband insertion loss of less than 0.82 dB, the return loss of more than 11 dB, and the isolation level of more than 38 dB by locating attenuation pole at 930 MHz.

• The Korean Journal of Emergency Medical Services
• /
• v.26 no.2
• /
• pp.87-96
• /
• 2022

Purpose: By analyzing the health status of emergency patients on islands in the Jeollanam-do province, this study aims to provide basic data for proposed future medical emergency services on the islands. This information includes monthly and hourly statistics on patients' characteristics, patient frequency, an analysis of first aid procedures, response times, and time spent at hospitals. Methods: The study analyzed the monthly and hourly frequency of emergency patients, first aid status and procedures, general patient characteristics, accident types, patient cognitive status and agility, marine police response times, and frequency and percentile of hospital dispatch times. Results: 1Q and #q show the highest patient turnover rate in one year. 50.5% of daily patients are admitted between 4 PM and 12 PM. The hospital dispatch time is within a one- to two-hour window for 54.0% of all patients. Conclusion: The emergency medical service system for the Jeollanam-do province islands and seas is available to all Korean residents, citizens, and visitors. It is necessary to implement an emergency medical system for the relevant organizations.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.26 no.3
• /
• pp.176-182
• /
• 2021

This research proposes a high-frequency circuit that can accurately predict the differential mode noise of single-phase inverters at the circuit design stage. Proposed single-phase inverter high frequency circuit in the work is a form in which harmonic impedance components are added to the basic single-phase inverter circuit configuration. For accurate noise prediction, parasitic components present in each part of the differential noise path were extracted. Impedance was extracted using a network analyzer and Q3D in the measurement range of 150 kHz to 30 MHz. A high-frequency circuit model was completed by applying the measured values. Simulations and experiments were conducted to confirm the validity of the high-frequency circuit. As a result, we were able to predict the resonance point of the differential mode voltage extracted as an experimental value with a high-frequency circuit model within an approximately 10% error. Through this outcome, we could verify that differential mode noise can be accurately predicted using the proposed model of the high-frequency circuit without a separate test bench for noise measurement.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.12C
• /
• pp.273-279
• /
• 2001

This paper describes a design and implementation of ISDN system on a chip which provides ISDN service and used to develop a low-price multimedia communication terminal. This ISDN SOC is an ISDN system control chip which has 32bit RISC processor, and it includes ISDN S interface transceiver, G.711 voice CODEC, PC interface for data communication, ISDN protocol which includes Q.931 call control protocol and internet protocol. It provides good solution to develope ISDN terminal equipment and ISDN terminal adaptor which connected with basic rate interface, because it minimize external peripheral devices.

• Journal of Energy Engineering
• /
• v.27 no.2
• /
• pp.26-31
• /
• 2018

This paper introduces a study to improve the thermal efficiency of the district heating user control facility based on reinforcement learning. As an example, it is proposed a general method of constructing a deep Q learning network(DQN) using deep Q learning, which is a reinforcement learning algorithm that does not specify a model. In addition, it is also introduced the big data platform system and the integrated heat management system which are specialized in energy field applied in processing huge amount of data processing from IoT sensor installed in many thermal energy control facilities.

• Biomedical Science Letters
• /
• v.26 no.4
• /
• pp.275-287
• /
• 2020

Since its introduction in the forensic field, quantitative PCR (qPCR) has played an essential role in DNA analysis. Quality of DNA should be evaluated before short tandem repeat (STR) profiling to obtain reliable results and reduce unnecessary costs. To this end, various human DNA quantification kits have been developed. Among these kits, the PowerQunat® System was designed not only to determine the total amount of human DNA and human male DNA from a forensic evidence item, but also to offer data about degradation of DNA samples. However, a crucial limitation of the PowerQunat® System is its high cost. Therefore, to minimize the cost of DNA quantification, we evaluated kit performance using a reduced volume of reagents (1/2-volume) using DNA samples of varying types and concentrations. Our results demonstrated that the low-volume method has almost comparable performance to the manufacturer's method for human DNA quantification, human male DNA quantification, and DNA degradation index. Furthermore, using a reduced volume of regents, it is possible to run 2 times more reactions per kit. We expect the proposed low-volume method to cut costs in half for laboratories dealing with large numbers of DNA samples.

• Korean Journal of Adult Nursing
• /
• v.18 no.4
• /
• pp.622-631
• /
• 2006

Purpose: This study elicited Korean students' experiences of nursing practice at geriatric hospitals. Method: A purposive sample of 26 Korean nursing students was recruited from K College of Nursing located in Daegu, Korea. Inclusion criteria were nursing students who: 1) finished nursing practice at geriatric hospitals, 2) were oriented and communicable, and 3) understood research purpose and agreed to participate in this study. Individuals were interviewed using Q-methodology. Results: The majority of the participants had experience of living with the elderly and volunteering related to elder care. Data analysis showed that participants' experiences of nursing practices were consisted of three types: skill acquiring-oriented, relationship-oriented, and practice system-oriented. Conclusion: Nursing practices at geriatric hospitals provided opportunities of having positive attitude toward the elderly for nursing students. Nursing students' experiences were divided into at least three different types. Nursing educators need to develop curriculum for gerontological nursing practice tailoring to theses differences.

• Smart Structures and Systems
• /
• v.26 no.5
• /
• pp.545-558
• /
• 2020

A design method of a Multiple Tuned Mass Damper (MTMD) system is presented for wind induced vibration control of a cable-supported roof structure. Modal contribution analysis is carried out to determine the dominating modes of the structure for the MTMD design. Two MTMD systems are developed for two most dominating modes. Each MTMD system is composed of multiple TMDs with small masses spread at multiple locations with large responses in the corresponding mode. Frequencies of TMDs are distributed uniformly within a range around the dominating frequencies of the roof structure to enhance the robustness of the MTMD system against uncertainties of structural frequencies. Parameter optimizations are carried out by minimizing objective functions regarding the structural responses, TMD strokes, robustness and mass cost. Two optimization approaches are used: Single Objective Approach (SOA) using Sequential Quadratic Programming (SQP) with multi-start method and Multi-Objective Approach (MOA) using Non-dominated Sorting Genetic Algorithm-II (NSGA-II). The computation efficiency of the MOA is found to be superior to the SOA with consistent optimization results. A Pareto optimal front is obtained regarding the control performance and the total weight of the TMDs, from which several specific design options are proposed. The final design may be selected based on the Pareto optimal front and other engineering factors.